similar to: extlinux can't boot

Hi all : my /dev/sda2 is ext3 format filesystem, the os moblin is installed in /dev/sda2 which is root partition, the bootloader is grub, now i want to change the bootloader to extlinux, but i came across some trouble, so i did some steps as following: 1. rpm -ivh syslinux-extlinux*.rpm 2. extlinux -i /boot/extlinux 3. i edit extlinux.conf , and put it in /boot/extlinux/, there is

Hi all: my filesystem is btrfs. /boot and / is on the same partition(/dev/sda2, format btrfs). i install syslinux as following: 1. rpm -ivh syslinux-4.00-1.i386.rpm syslinux-extlinux-4.00-1.i386.rpm syslinux-tftpboot-4.00-1.i386.rpm 2. extlinux-i /boot/extlinux. (the extlinux.sys can't be create on the directory). 3. i copy extlinux.conf to /boot/extlinux . (of course

Hi, I want use extlinux 3.07 to boot Thinstation from hard disk. o I have kernel, whos name is vmlinuz, and init RAM disk (initrd). My hard disk is... Disk /dev/hda: 65 MB, 65536000 bytes 8 heads, 32 sectors/track, 500 cylinders Units = cylinders of 256 * 512 = 131072 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 499 63856 83

> Hello, > > We are experiencing a strange behaviour on an embedded system (i386 PC board). > > The structure of our disk is the following one : > - A 2GB fat16 partition with DOS and syslinux > - A 100GB Ext4 partition with Extlinux an several linux images to boot on ram > - A swap partition > > The system boot on syslinux to choose among Dos and Linux boot using

The problem as I view it, lies in specifying a directory rather than a drive ( /mnt/.. or /media.. instead of /dev/sdb.. or /dev/sdc.. ). If, for instance, /dev/sdb1 is in fact mounted to /media/disk all is fine. If the path exists and is not a mountpoint ( /dev/sd... not mounted to it ), then extlinux will set the system disk as base for the directory. ( i.e. /media/disk = /dev/sda4 in my

--- extlinux/main.c | 9 ++++++++- libinstaller/syslxopt.c | 8 +++++++- libinstaller/syslxopt.h | 1 + man/extlinux.1 | 3 +++ 4 files changed, 19 insertions(+), 2 deletions(-) diff --git a/extlinux/main.c b/extlinux/main.c index 0669bb9..8a0ac63 100644 --- a/extlinux/main.c +++ b/extlinux/main.c @@ -381,6 +381,13 @@ int modify_adv(void) rv = -1; } } +

Hi: I've been seeing intermittent build failures with the extlinux target, and I believe I've tracked it down to a VPATH issue. See this make -d log: Finished prerequisites of target file `extlinux'. Prerequisite `extlinux.o' is newer than target `extlinux'. Prerequisite `setadv.o' is newer than target `extlinux'. Prerequisite

When I try to boot my system using extlinux I get the error: EXTLINUX 3.51 2007-06-10 EBIOS Copyright (C) 1994-2007 H. Peter Anvin Could not find kernel image: linux boot: ???????????????????????????????? I've searched the archives and it would appear that extlinux can't find the extlinux.conf file.... Is there something glaring that I am missing? TIA - Phil I have a 32MB CF card

How often is this the case ? ??? > If extlinux is the system bootloader, then often what you call the > system partition will be the one that should have extlinux installed on it. I think in most cases people try to make _some_other_ disk bootable. If I boot with extlinux as the bootloader why should I want to install it again ? Apart from that it would then require -u not -i. Casual On

On Tue, Oct 20, 2015 at 1:08 PM, Ady via Syslinux <syslinux at zytor.com> wrote: > >> Hello, >> >> We are experiencing a strange behaviour on an embedded system (i386 PC board). >> >> The structure of our disk is the following one : >> - A 2GB fat16 partition with DOS and syslinux >> - A 100GB Ext4 partition with Extlinux an several linux images

On Sat, Aug 8, 2015 at 10:32 AM, Adam Baxter via Syslinux <syslinux at zytor.com> wrote: > Hi, > I'm trying to build extlinux statically, but no matter what CFLAGS or > OPTFLAGS I set in the Makefiles I get bios/extlinux/extlinux: ELF 64-bit > LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared > libs), for GNU/Linux 2.6.24, >

On Sun, Aug 4, 2019 at 6:13 PM Tong Sun via Syslinux <syslinux at syslinux.org> wrote: > > Hi, > > I'm experiencing a strange problem, my extlinux is no longer bootable, > and I'm wondering how to troubleshoot the problem for a fix. > > It's not just an one-off thing, but is happening to me all the time -- > I use extlinux to boot up all my linux, and it

1. Which label is referred by -M, --menu-save=label Set the label to select as default on the next boot ? 2. With # grep 'label' /boot/extlinux/extlinux.conf label 1 menu label An old linux version 2.1 What will be the consequences of # extlinux -M 1 /boot/extlinux and # extlinux -M 'An old linux version' /boot/extlinux 2.2 What are

Hello, We are experiencing a strange behaviour on an embedded system (i386 PC board). The structure of our disk is the following one : - A 2GB fat16 partition with DOS and syslinux - A 100GB Ext4 partition with Extlinux an several linux images to boot on ram - A swap partition The system boot on syslinux to choose among Dos and Linux boot using chain. When Linux is chosen, syslinux chains to

Hello, Is it possible to install extlinux into a disk image, without being root ? It seems like extlinux --install absolutely requires the specific block device in which extlinux should be installed to be mounted. This prevents from doing an extlinux installation as non-root, which is annoying for build systems such as Buildroot [1] that build a complete Linux system from source, without being

> Is it possible to install extlinux into a disk image, without being > root ? > > It seems like extlinux --install absolutely requires the specific block > device in which extlinux should be installed to be mounted. This > prevents from doing an extlinux installation as non-root, which is > annoying for build systems such as Buildroot [1] that build a complete > Linux

> Hello syslinux, > > Merry Christmas! These patches will make extlinux work with umounted > ext2/3/4 filesystem, for example: > > $ extlinux -i /dev/sdXN > or > $ extlinux -i file_block > > Also it can work with something like: > $ extlinux /dev/sdXN --reset-adv > or > $ extlinux file_block --reset-adv > Thank you. The 'extlinux' command

make[1]: Entering directory `/home/gzp/src/syslinux-3.62-pre10/extlinux' gcc -Wp,-MT,extlinux.o,-MMD,.extlinux.o.d -W -Wall -Wno-sign-compare -D_FILE_OFFSET_BITS=64 -g -Os -I. -I.. -I../libinstaller -c -o extlinux.o extlinux.c In file included from /usr/include/linux/vfs.h:4, from /usr/include/linux/fs.h:14, from extlinux.c:43: /usr/include/asm/statfs.h:12:

Hi , I ve tested the pclinux minime on usb 1Gb and later 8Gb, with fat32 and syslinux boot , works splendid in Ram , and persistant saves on stick.. Now i want to try extlinux-boot with ext2 or 3 on the usb. With ext3 , i get constantly bumped to commandline, where i could type in the vmlinuz and initrd paths , but it cant make the loop-file of minime work..so it gets little panic :* But it wont

I am new to syslinux/extlinux. Can I boot from a linux btrfs subvolume? I am getting "Failed to load ldlinux.c32" when I attempt to boot from a btrfs subvolume. Setup: 1) I have a USB disk with one partition. The partition is marked "active". 2) I make a btrfs filesystem with "mkfs.btrfs /dev/sdd1". I mount the partiton and execute "btrfs su create root".