similar to: PXELINUX 3.86 Boots Over HTTP, 4.00 Does Not?

Hi , Thought I would keep the same topic as a previous post in June - still is a problem with pre49 Setting dhcp options 209 and 210 is breaking gpxe/pxelinux - everything else being the same, it works fine in 3.86 and not 4.00. ..Inserting following into pxelinux.gpxe ... set 209:string pxelinux.cfg/default set 210:string http://xxxxxxxx.xxx.xx.uk/pxe/ It is hanging with 'Trying to

it seems versions of pxelinux 4.00 and later hangs qemu (0.12.x, 0.13.x) when network booting using etherboot or gPXE and qemu's kvm support is enabled. pxelinux 3.86 and earlier do not appear to trigger the problem. i also didn't experience the problem with qemu-kvm (formerly known as kvm). qemu without kvm support enabled also seems to work fine. for more details, please see:

Hello, I use the extlinux bootloader, and I've recently discovered that the current version can no longer boot Windows. The message it flashes is "Requested partition not found!" After downgrading to the version 3.86, it was able boot correctly. Unfortunately, I do not know in which was the last version which was able to boot Windows (I rarely boot it), but I am pretty sure that

syslinux 3.86 and 4.00-pre55 make[2]: Entering directory `/home/gzp/src/syslinux-4.00-pre55/gpxe/src' [AR] bin/blib.a ar: creating bin/blib.a [HOSTCC] util/zbin [LD] bin/undionly.kkpxe.tmp arch/i386/scripts/i386.lds:1: undefined symbol `_max_align' referenced in expression make[2]: *** [bin/undionly.kkpxe.tmp] Error 1 make[2]: Leaving directory

Randy McAnally wrote: > > Thank you so much, this is the kind of news I needed! > > ---------- Original Message ----------- > From: "Arends, R.R." <r.r.arends at hro.nl> > To: "Randy McAnally" <rsm at fast-serv.com> > Cc: <gpxe at etherboot.org> > Sent: Wed, 03 Mar 2010 10:10:56 +0100 > Subject: Re: [gPXE] localboot 0 hang on some

Syslinux 3.86 is out; it is a bug fix release. Syslinux 4.00, starting with Syslinux 4.00-pre38, is now officially in beta test. Special thanks to Intel Corporation, my current employer, for their support for my Syslinux work. Changes in 3.86: * chain.c32: fix chainloading the MBR of a hard disk (broken in 3.85). * mboot.c32: report the boot loader name in the information structure. *

Hi Peter et al, Just wanted to let you know my heartfelt appretiation of what you and the other devs have done in integrating gpxe and pxelinux... it works wonderfully well for me... I simply swapped my pxelinux.0 for my gpxelinux.0 and modified my pxelinux.cfg/default to use urls to refer to the kernel and initial ram disk images and it worked perfectly (dns resolution and all). This is a huge

Okay guys, This is separate from my last few messages. Along with those attempts, I decided to migrate from pxelinux.0 to gpxelinux.0 in my existing setup. Admittedly I haven't tried previous gpxelinux.0's but I am willing to if someone thinks it would be useful. Everything works as expected with pxelinux.0 of the same version. With gpxelinux.0: TFTP Prefix: Trying to load:

Hi All, Sorry if this is a stupid question, but I've managed to get pxelinux to load gpxe and then manually load linux by using the gpxe command line and HTTP for the kernel and initial ram disk. My question is whether it is possible to somehow pass gpxe commands through some mechanism other than the DHCP filename response. Since I don't have control over our DHCP infrastructure, but do

I'm using gpxe to chain to pxelinux on a different host than gpxe was loaded from. The chain command looks like this chain tftp://other-host/pxelinux.0 Unfortunately, pxelinux is ignoring other-host and going back to the original host to look for its files. Is there any way to alter this behavior? Thanks, Mike

On Wed, Jul 23, 2014 at 10:32 AM, Geert Stappers <stappers at stappers.nl> wrote: > Hi, > > Since which version of pxelinux.0 is understood in pxelinux.cfg/default that > > kernel http://host.lan/netboot/vmlinuz > > means vmlinuz should be transported over HTTP? For non-EFI systems, this has meant use HTTP services if available (ie, iPXE/gPXE or lwIP as in

Hi, I'm investigating using LTSP for thin clients at my place of work, and I've encountered a problem that I don't know how to approach. I don't know if the problem is with gPXE, PXELinux, or the LTSP kernel, but I think PXELinux is probably the right level to investigate it. My situation is as follows: I've installed the LTSP system from Ubuntu Gutsy. I've tested it

Op 2014-07-23 om 17:57 schreef Gene Cumm: > On Wed, Jul 23, 2014 at 10:32 AM, Geert Stappers <stappers at stappers.nl> wrote: > > Hi, > > > > Since which version of pxelinux.0 is understood in pxelinux.cfg/default that > > > > kernel http://host.lan/netboot/vmlinuz > > > > means vmlinuz should be transported over HTTP? > > For non-EFI

Hello, I saw this in the release notes for 4.00: "PXELINUX: TFTP URL syntax (tftp://) supported even when not running gPXE/gpxelinux" I can't find any info describing this new functionality (searched wiki and mailing list), I'm guessing you can now use tftp:// in the paths, e g: LABEL mylabel KERNEL tftp://servername/path/to/mykernel APPEND myoptions Correct? I've

Hi, I got this from my digital camera with Syslinux compiled from source (yes, I've got a configuration file with a UI directive): SYSLINUX 4.02 pre-1-g0ee5047 CHS Copyright (C) 199... EDD: Error 0100 reading sector 0 EDD: Error 0100 reading sector 2252244088 EDD: Error 0100 reading sector 2252244089 EDD: Error 0100 reading sector 2252244090 EDD: Error 0100 reading sector 2252244091 EDD:

Hi, I found this message in your online mail archive, i have found the same problem and did some research in the past on this. Maybe you would be interested to know it is a problem on any virtualisation product not just ESX. Second it is a problem in gPXE that you embedded in gPXElinux. The problem was build in gPXE after version 0.97 so any gPXElinux build a newer version has this problem. I

Hello everyone I am experiencing problems with PXELinux/gPXE when netbooting using HTTP. The problems I encounter: - When the intel bootROM is sending out a DHCPDISCOVER it might not recieve an IP address, but the server did send out a OFFER. Capturing packets reveals the packets have been sent, and the client _should_ have recieved it. But when it passes that stage: - When the gPXE bootROM is

I am attempting to setup a test gpxe(linux.0) http site, to test among other things the recent dynamic option 252 solution. In the process of investigation I stumbled across http://www.etherboot.org/wiki/appnotes/authmenus which indicates the gpxe can launch vesamenu.c32 directly. Various other pages on etherboot's site indicate menu.c32/vesamenu.c32 can be used independently as well.

Hi, Since which version of pxelinux.0 is understood in pxelinux.cfg/default that kernel http://host.lan/netboot/vmlinuz means vmlinuz should be transported over HTTP? Since which version of pxelinux.0 is it possible to boot on UEFI? Those questions elaborated: What I want is fast netboot UEFI servers. What I'm looking for is an advice which version of PXELINUX between version

Hardcoded options for PXELINUX (embedded in the pxelinux.0 binary by pxelinux-options) was introduced in 3.83. While working on documentation, I decided to try it on 5.10, verified that 209 (config-file) was set as an after option and saw no change in behavior. I then tested the same as a before with no change. I then tested 3.86, found it working and tested 4.06 and 4.00 and found them broken.