similar to: PXELINUX + LOCALBOOT disables network within operating system

https://bugs.freedesktop.org/show_bug.cgi?id=51809 Bug #: 51809 Summary: jReality "Export->Image" on nouveau corrupts memory / locks up X server Classification: Unclassified Product: Mesa Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW

Assuming I have a firewire card with a supported chipset, is there anything special I need to do in order for the kernel to recognize the card? Shouldn't kudzu "wake up" and configure the card when I boot up after installing it? This is a brand spanking new 4.4 system and a supported Agere chipset firewire card. I'm having trouble tickling devices connected to the card.

Hello, I have this problem - I have installation of Xen and Centos 5 (all RPMs are from Centos repositories). I have several DomU virtual machines running on this machine. When I try to copy some bigger amount of data from another physical computer to Dom0/DomU on this machine, the network freezes. The link is still up, I can see that the connection really links on the switch, but nothing is

Hi! I am experiencing strange behavior with my new CentOS 6.3 installation (system up to date). I have a big 11 TB EXT4 array mounted on /home/data. The server is a Tyan 2U (TA26-B3992-E) with Dual Opteron 2216, one cpu has 4 Gigs RAM and the other has 8 Gigs (so 12 Gigs total). The server uses 8 x Seagate 2TB SAS hard disks (7200 RPM) and all the disks are grouped together to form 1

Correct, 3ware 9670SE SATA-II Raid PCIe [root at daisy dev]# lspci 00:00.0 Memory controller: NVIDIA Corporation CK804 Memory Controller (rev a3) 00:01.0 ISA bridge: NVIDIA Corporation CK804 ISA Bridge (rev a3) 00:01.1 SMBus: NVIDIA Corporation CK804 SMBus (rev a2) 00:02.0 USB controller: NVIDIA Corporation CK804 USB Controller (rev a2) 00:02.1 USB controller: NVIDIA Corporation CK804 USB

I have just bought a 120GB external usb drive but after plugging it in it is not getting mounted. lines from /var/log/messages: > Oct 22 18:54:49 station2 kernel: usb 1-2: new high speed USB device using ehci_hcd and address 2 > Oct 22 18:54:49 station2 kernel: usb 1-2: configuration #1 chosen from 1 choice > Oct 22 18:54:49 station2 kernel: scsi4 : SCSI emulation for USB Mass Storage

I get the following on an AM2 AMD5000+, nvidia gigabyte motherboard. Irq 169 is the USB. Anyone know why this is happening? If I install Centos 4.5 I do not get this. THanks, Jerry Oct 19 23:43:58 TESTING kernel: irq 169: nobody cared (try booting with the "irqpoll" option) Oct 19 23:43:58 TESTING kernel: Oct 19 23:43:58 TESTING kernel: Call Trace: Oct 19 23:43:58 TESTING kernel:

hi all . i am facing a issue with centos recently : after every boot i receive the following message in terminal : > Sep 19 13:13:02 station2 kernel: irq 50: nobody cared (try booting with the "irqpoll" option) > Sep 19 13:13:02 station2 kernel: [<c044e6fa>] __report_bad_irq +0x2b/0x69 > Sep 19 13:13:02 station2 kernel: [<c044e8e7>] note_interrupt +0x1af/0x1e8

Thanks Anna, this was also quite interesting for me. Did you mean that I just have to eliminate the else branch or raise arround "All devices behind the uppermost PCI/PCI-X bridge must be co-assigned to the same guest." or do I have to eliminate more in order to prevent an FLR (whatever that is). For my board it''s definitely necessary to move PCI devices in different guests,

Hi, I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box. *Its not detected.* Details are as below :- [root at asterisk ~]# lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI

Hi, I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box. *Its not detected.* Details are as below :- [root at asterisk ~]# lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI

I am running Wow 4.0.3 on Linux Mint 9 using Wine 1.2.1 I use PlayonLinux to manage Wine versions, and I have used up to 1.3.7, which I think is the most current version. Usually, it'll run OK. But I have run across several problems. 1. Logging on: When I log on, sometimes the computer will become completely non responsive. The cursor moves, bot the sound stops, no buttons can be pushed, and

I setup Xen 3.1 on a etch 32 bit box with amd64. I compile the standard Kernel from Xen and on the other way the gentoo 2.6.20 for both dom0 uand domU. The Xen Setup was bridged. But if i download a tar file, i cant extract it cause of the following error: 09:48:35 (8.66 MB/s) - `xxx.tar.gz'' saved [64985129/64985129] tar: Skipping to next header gzip: stdin: invalid compressed

Hi, once again, Problems with pciback and pci passthrough the system -------------------------------------------------------------------------------- DOMAIN0:~# lspci -tv -[0000:00]-+-00.0 nVidia Corporation nForce3 250Gb Host Bridge +-01.0 nVidia Corporation nForce3 250Gb LPC Bridge +-01.1 nVidia Corporation nForce 250Gb PCI System Management +-02.0

Hello all, I just got the latest cvs snapshot and I'm trying to compile asterisk.. When I run nefeli:/usr/src/asterisk/zaptel# make clean; make linux26 Compile stops with errors... /usr/src/asterisk/zaptel/zaptel.c:6509: warning: passing argument 2 of 'class_device_create' makes pointer from integer without a cast /usr/src/asterisk/zaptel/zaptel.c:6509: warning: passing argument 3

I am using centos 5 x86_64 AMD64 X2 4200+. I am current on yum update. My machine has two ethernet cards. e1000 (eth0) and forcedeth (eth1) [root at fsdsigns2 ~]# more /etc/modprobe.conf alias eth0 e1000 alias eth1 forcedeth sometimes on boot the forcedeth driver thinks it is eth0: [root at fsdsigns2 ~]# dmesg | grep eth forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.

Hello, this is my first Xorg/Nouveau bug-report ever so I'll try to explain as good as I can ;) After several years of using the NVIDIA binary driver, I once again tried the latest nouveau driver for my Onboard Geforce 8100 card. Several month ago I couldn' t even get to the kdm screen. But to my surprise everything I needed worked perfectly. Even KWin compositing. Amazing. Although

What does the following EDAC problem means? The machine is a AMD 64bit box running Centos 5. It looks like some problems aroung AMD DRAM Memory controller. But what does it really mean b/c most of my AMD boxes has these messages in /var/log/messages. Please help. ... Aug 1 23:29:40 ccn128 kernel: EDAC MC: Ver: 2.0.1 Jun 12 2007 Aug 1 23:29:40 ccn128 kernel: EDAC MC0: Giving out device to

I am trying to get esata working. my lspci is below. When I plug in the disk an turn it on - dmesg reports nothing. Is it supposed to report anything like a usb disk does? Is there a module to load? My motherboard is GA-MA78GM-US2H. Jerry --------- 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge