similar to: network trouble with asus P5LD2-VM board

Hi all, I am trying to execute Xserver on Dom0 but an error occurres. I have a fresh Debian Lenny install. I''ve installed Xen via aptitude, restarted the system with Xen kernel, and then installed xfce4 with all dependencies. When i try startx i get this errors: (WW) RADEON; No matching Device section for instalnce (BusID PCI:4:0:1) found Fatal server error: xf86MapVidMem:

Hi! I want to upgrade hardware on my router (iptables, htb, >1000 users). Now it is based on usual desktop PC (Intel Prescott P4 3.00 Ghz, 1 Gb RAM). The reason of hardware upgrade is growing up number of users, also we are planning to increase upstream link from 100 Mbit/s to 1 Gbit/s. Iptables rules are now optimized with ipset tool, for tc I''m using hash tables as well. So I

Anyone had any success with or hints for a system based on the Asus P5B-VM DO board, or the Intel Q965 (with its associated Intel GMA 3000 VGA chip) in general? I had to put pci=nommconf in order to get the installer (CentOS 4.5) and the installed system to boot, but I can't get the graphics to work. Following the instructions at the Intel website

Hi guys, I was wondering whether there's anyone who could share his/her experiences with using Microsoft RTC Library. In particular I am wondering what Ethernet capacity should I have in scenario of 30 people using Microsoft RTC Library for SIP communication (PBX is obviously Asterisk :-) ) concurrently (alaw codec being used)? What problems can be expected in such scenario? Would a good 1

Hi Everyone, I'm trying to get an asus motherboard to netboot. It has an integrated Nvidia boot agent that's supposed to network boot pxe happily. I've setup the necessary services and environments in tftpd, however, the boot agent is running into trouble requesting files from the tftp server. It always seems to receive File Not Found errors. The filenames are specified properly

Hi list! I'm trying to setup a new * server with a TE210P in a Dell 2850 box. I'm using zaptel version 1.2.5, the linux flavour I'm using is CentOS 4. In a previous thread I read about the results I should expect from zttest. On my home box (using the crappy Asus A7V600) I got really bad results from zttest (just over 97.5) but I know that this motherboard just sucks. To my

Hello listmates, We are working on setting up two private networks linked by a public network which is fast (1 Gbit/s) but potentially insecure. Since the hosts on our two networks need to talk to each other, and do so securely, we have decided to use OpenVPN to connect them, making one gateway a server and the other a client. The connectivity part was easy to establish and worked like a charm.

Hi, Can you tell why my vnic built on top of an aggregation of 2 NICs of 1 Gbit/s doesn''t report a speed of 2 GBit/s ? [root at nazgul /]# dladm show-dev bge0 link: up speed: 1000Mb duplex: full bge1 link: down speed: 0Mb duplex: unknown bge2 link: down speed: 0Mb duplex: unknown bge3 link: down speed: 0Mb

Hi. I have 2 PC's connected with 1GBit NIC's. When I transfer a file from my File-Server(Redhat9.0, 256 SD-RAM, 300MHz PII, RTL8169 NIC, 2x Western Digital WD200JB RAID 0) to my Windows-PC(AMD Athlon XP 1800+, 1024 MB DDR-RAM, WINXP PRO, RTL8169 NIC, 2x Western Digital WD080JB RAID 0) with Samba, i get Speeds around 8-9MB/sec. I think this is too low for an GBit Network, so i tested the

Hi, recently I installed a new GBit connected iSCSI Storage to one of our fileservers. Redhat EL Linux 5.7 samba3x-3.5.4-0.83.el5, kernel 2.6.18-238.19.1.el5PAE, Dell Poweredge 1750, dual Xeon. The transfer speed is very very different, depending on the method I use. Currently I'm the only user accessing that server and there is low network traffic. I know, that there are some overheads

Hello listmates, As some of you may know we have been having a really bad problem with Realtek Semiconductor Co., Ltd. RTL-8169 cards. See here for details: http://forum.nginx.org/read.php?24,140124,140224 So now my question is, what PCI 1 Gbit/s Ethernet adapters should I use under CentOS? If you have had a consistent positive experience with any particular chipset/brand please speak up.

Hi there, we're using tinc to mesh together hosts in a public datacenter (instead of using a private VLAN, sort of). So all hosts are reasonably modern; connections are low latency with an available bandwith of around 500Mbit/s or 1Gbit/s (depending on how close they are to each other). Iperf between two nodes directly reports around 940Mbit/s. The CPUs are Intel(R) Core(TM) i7-4770 CPU @

Hi, I'm looking for some recommendations for a "fast" fileserver regarding the hardware you use. We have different fileservers as our requirements changed over time. The "main" problem we are faced with is, that with smb (windows 7 and OS X) clients we never get really close to GBit speed on reads or writes. Using the same servers/storages with ftp, ssh, rsync, nfs we

Hello, We are doing digital recording over a 100 Mb/s switched network to a dedicated Samba NAS-Filer and need to optimize our workflow and present some performance data. I just want to be sure, to not overlook some important aspect in my experimental setup. Let me explain in short what is our infrastructure: The Swiss Library for the Blind has started producing Digital Talking Books (see

Hi, i need a server for 5000 clients and 50 sources at the same time Can you help me to choose the right server? I was thinking this one PowerEdge R710 n.2 x Intel Xeon E5502 (1,86GHz, cache 4MB, 4,86 GT/s QPI) 2GB Memory for 1CPU (2x1GB Single Rank UDIMMs) 1066MHz 2 X 146GB SAS 15.000rpm 3,5" hd hot-plug PERC 6/i RAID controller 256MB PCIe 2x4 1 gbit network card Thanks --------------

Hello, I'm experiencing very slow read/write performance, about 20 MB/s, on Samba share when I configure the "server signing" option as "mandatory". Once I set "server signing" to "default", the read/write performance returns to average speed about 800 MB/s. I am using Samba 4.9.4 on server with Intel Xeon CPU E5-2690 0 @ 2.90GHz (32 threads) and 10 Gbit

Hi all, I have a gluster volume used to host several VMs (managed through oVirt). The volume is a replica 3 with arbiter and the 3 servers use 1 Gbit network for the storage. When testing with dd (dd if=/dev/zero of=testfile bs=1G count=1 oflag=direct) out of the volume (e.g. writing at /root/) the performance of the dd is reported to be ~ 700MB/s, which is quite decent. When testing the dd on

hi all, i have a strange behavior on opensuse 10.2 GM. kernel-xen-2.6.18.2-34 xen-3.0.3_11774-20 when i try to setup a fullvirtualized xen instance, the vm crashes randomly during installation. i found out, that always before the crashes my X Server Screen gets corrupted a little bit. i switched to runlevel 3 and tried again and everthing worked. to make sure that it wasn''t luck, i

Hi, I've a strange issue with the performance of file transfers between a Samba server and a Vista client. My configuration looks like this: fileserver: Samba 3.3 on FreeBSD 6.2 ----- gbit switch ----- workstation: Vista x64 When transfering files between the two PCs, I get abount 6.5 to 7 MB / sec. On my last Vista installation I got about 40 MB / sec. I've tried the following: -

Hi all, I need some suggestions or hints which syslinux version I shall use. The main focus will be on PXE boot. I have to upgrade due to (expected) performance problems (tftp), so I will swich to HTTP boot ! existing system: - syslinux version 4.05 (tftp only) - used modules : pxelinux.0, memdisk, vesamenuc32, patched startrom.0 - I boot .nbi , .iso, .ima and sometimes files (clonezilla etc.) -