Displaying 20 results from an estimated 2000 matches similar to: ""sector read error" with 3.20-pre8 syslinux.com"
2014 Jun 08
2
How to use --once? Does it work?
>
> To be clear, I am not saying there is no bug - there might be.
>
I performed the following test with several versions of Syslinux:
1_ Execute:
'extlinux --once=non_default_label --install /mnt/sda1' ;
2_ In first reboot, the "non_default_label" should be executed;
3_ In second reboot, the default label should be executed.
Results:
_ 4.05 to 4.07: OK.
_
2005 Sep 13
2
Fw: Issue with pxelinux
I've been working with Matt Burgess here on this problem, and have found
the following:
syslinux 3.08-pre10 ? broken
>>> config.inc:max_cmd_len=255
syslinux 3.08-pre11 ? works
>>> config.inc:max_cmd_len=1023
syslinux 3.08 ? works
>>> config.inc:max_cmd_len=1023
syslinux 3.09-pre1 ? works
>>> config.inc:max_cmd_len=1023
syslinux 3.09-pre2 ? broken
2007 Feb 09
6
syslinux-3.36-pre8 feedback
Tested floppy boot on two machines (one PII 350, one 486DX4)
Floppy boot with syslinux is very very slow, more than 18 mn to boot a linux
kernel from floppy on the 2 machines.
Tested with 3 different disquettes that were know to work, boot is reached
after this very long time.
Noise from floppy head make think floppy wait approximatly one minute
between each read.
No problem with pxe boot with
2006 May 06
1
extlinux 3.20-pre8 notes
hi Peter, everyone,
I recently installed extlinux on my CF drive.
after a few botches, it works, with menu.c32 too.
Heres a few notes/observations:
- menuing seems pretty sensitive to presence of tabs in extlinux.conf,
unlike with pxelinux.cfg/default, Is this an oversight,
or something Im misremembering ?
- extlinux doesnt have the timeout after menu-choice.
if I dont choose, it times out and
2014 Jun 09
3
How to use --once? Does it work?
> On 06/08/2014 02:58 PM, Ady wrote:
> >>
> >> To be clear, I am not saying there is no bug - there might be.
> >>
> >
> > I performed the following test with several versions of Syslinux:
> >
> > 1_ Execute:
> > 'extlinux --once=non_default_label --install /mnt/sda1' ;
> > 2_ In first reboot, the
2009 May 20
3
Last call for Syslinux 3.81
I have just pushed out Syslinux 3.81-pre7; the only delta over -pre6 is
a small change to meminfo.c32. I expect to make a 3.81 release probably
early next week, so this is a last call notice.
If you have any outstanding issues, or you have tests you want to do and
want some more time (Dag - I know you said you were going to try to do
some tests over the weekend), please speak up *now*.
-hpa
2012 Oct 09
5
Syslinux-5.00-pre8
Another prerelease for the 5.00 (elflink) branch should be making its
way to the mirrors now. The shortlog for -pre7 to -pre8 is listed below.
Just like the 4.06 branch I was really hoping to drop a final release
this week. Once 4.06 is out I'll merge that into 5.00.
If you can, please test it out and let know any of any bugs you find.
Because so much of the core infrastructure is rewritten
2006 Mar 17
3
SYSLINUX 3.20-pre7 pushed out, with mboot fixes
Hi all,
I have merged Tim's patches to the mboot loader, and have pushed it out
as 3.20-pre7.
I guess I'm going to actually have to make a 3.20 here soon...
-hpa
2013 Jul 05
4
Dell OptiPlex GX620 can longer boot from CD with syslinux-5.X
Sorry for the delay, we were too busy drinking and playing with explosives
yesterday. :)
Here are some tests. We did one on a similar machine and it worked.
We deleted the configuration file, obviously.
# Dell OptiPlex GX620
ISOLINUX 5.11 5.11-pre7
isolinux: Starting up, DL = 82
isolinux: Loaded spec packet OK, drive = 82
isolinux: Main image LBA = 00000115
isolinux: Image checksum error,
2001 Nov 05
2
oops on 2.4.14-pre8
Hello!
I got oops after about 3 hours of uptime. Load was about 1,5.
This is output of ksymoops after forced reboot if it helps someone. :-)
ksymoops 2.4.0 on i686 2.4.14-pre8. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.14-pre8/ (default)
-m /boot/System.map-2.4.14-pre8 (default)
Warning (compare_maps): mismatch on
2005 Aug 18
2
Nasty Bug (BIOS?).
At first I thought, I was dealing with the known EBIOS/CBIOS-problem.
The symptom was exactly the same (hangs at ...EBIOS). As 3.10-pre8 and
3.10-pre9, in contrary what was mentioned in the ML, did not bring any
improvement, I looked deeper into what could be my specific problem.
I found out that the program just halted at 'cmp [esi],edx' (line 658;
ldlinux.asm 3.10-pre9)! By replacing
2005 Aug 09
8
SYSLINUX 3.10-pre* testing
Hi!
as i know that you like test reports, here are some...
Testing environment:
CompactFlash card, connected with an USB adapter to a Compaq Evo D310
frontal USB port.
This machine boots via USB quite well with syslinux.
3.09 boots ok, no problem
3.10-pre2 does not boot
3.10-pre3 does not boot
3.10-pre4 does not boot
3.10-pre5 locks up pc
3.10-pre6 locks up pc
3.10-pre7 writes
2009 Mar 25
1
Bug: config parser broken in ff78e2b62a45f18c0d427153f957d2f06c0f5c1c
Just a heads up while testing newer versions to work around a hardware
problem it seems the config file parser is fubar.
Broken: ff78e2b62a45f18c0d427153f957d2f06c0f5c1c
Working: 332a924759efe50e783ad3116ecf17d518dfebe2
$ git name-rev --tags 332a924759efe50e783ad3116ecf17d518dfebe2
ff78e2b62a45f18c0d427153f957d2f06c0f5c1c
332a924759efe50e783ad3116ecf17d518dfebe2 tags/syslinux-3.74-pre7~1
2008 Mar 31
4
SYSLINUX 3.70-pre8
I have just pushed out SYSLINUX 3.70-pre8. The two main differences is
that I have updated the gPXE source base, and added a sanboot module
(sanboot.c32). sanboot.c32 *should* be capable of initiating an iSCSI
or AoE boot, but I haven't actually tested it.
The other main difference is that gPXE now advertises HTTP/1.0 instead
of HTTP/1.1, since the code was not actually HTTP/1.1
2006 May 24
3
[PATCH 1/1] mboot.c32: fix register constraints bug
From: Tim Deegan <Tim.Deegan at cl.cam.ac.uk>
Fix register constraints of final jump to kernel entry.
When compiled with some GCC versions, mboot.c32 would clobber the kernel
load address and try to jump to 0x2badb002.
Signed-off-by: Tim Deegan <Tim.Deegan at cl.cam.ac.uk>
---
--- syslinux-3.20-pre8/com32/modules/mboot.c.orig 2006-05-22 11:06:17.000000000 +0100
+++
2005 Aug 29
1
SYSLINUX 3.11-pre8 -- release candidate
I have released SYSLINUX 3.11-pre8; this is a release candidate.
The differences versus -pre6 is that I have reverted the PXELINUX stack
changes I did in SYSLINUX 3.10 since there are confirmed reports that
they break at least one platform.
As before, I hope to release 3.11 on Tuesday unless I get objections.
ftp://ftp.kernel.org/pub/linux/utils/boot/syslinux/Testing/
-hpa
2014 Jun 05
2
How to use --once? Does it work?
On Jun 05 2014, Ady wrote:
> > I'm working on a system derived from ARCH linux, running what they
> > call version 6.02-4 of the syslinux package (which would be your
> > version 6.02 plus their/our patches). I've got a syslinux.cfg
>
> ArchLinux currently is already using 6.03-pre12 or newer, so I would
> suggest for you to update.
I want to keep the
2004 Dec 29
2
SYSLINUX 3.00-pre9 released
I have just released SYSLINUX 3.00-pre9. The only change versus
3.00-pre8 is that the MEMDISK query API now reports the boot loader ID
byte, per Bernd's suggestion.
This is a release candidate, and I plan to release it as 3.00
*tomorrow*, unless I hear back anything bad.
-hpa
2006 Dec 12
1
SYSLINUX 3.32-pre7 release candidate
I'm going to promote SYSLINUX 3.32-pre7 to release candidate unless
someone objects, with the intent of releasing 3.32 immediately after
Christmas. Please let me know if there are problems that should make me
*not* do so, even if you have previously reported them.
-hpa
2013 Jul 06
0
Dell OptiPlex GX620 can longer boot from CD with syslinux-5.X
> Here are some tests. We did one on a similar machine and it worked.
> We deleted the configuration file, obviously.
>
> # Dell OptiPlex GX620
> ISOLINUX 5.11 5.11-pre7
> isolinux: Starting up, DL = 82
> isolinux: Loaded spec packet OK, drive = 82
> isolinux: Main image LBA = 00000115
> isolinux: Image checksum error, sorry...
>
> # Dell OptiPlex GX620
>