similar to: boot bootcd (isolinux) copied on the hard disk

Hi, I've coded loading NT cdrom bootsector into isolinux 1.68 myself (http://www.nu2.nu/bootcd/#multimemdisk) and I now see you have included it in isolinux 1.73 and higher. Great!!! I tried it using isolinux 1.74 and 1.75pre2, but I cannot get it to work. It says: -- Loading Invalid or corrupt kernel image. -- I use the file extension ".bin" as I see in the isolinux.asm source,

Hi I am having problems loading bcdw (http://bootcd.narod.ru) from the isolinux bootloader. I use this to load the acronis programs. It worked fine up till version 3.51 but does not work anymore with 3.52. Here is the code to load the second bootmanager label l kernel /bcdw/bcdwboot.bin Any insights to what might be wrong here? With 3.52 I get Error! Cannot load

hi, i've been trying around for a month or so to get isolinux on my toshiba satellite 4010cdt running. It doesn't really work. The debug version says the following: ISOLINUX 1.75 2002-06-14 ... isolinux: Startinug up, DL = 82 isolinux: Loaded spec packed OK, drive = 82 and that's it. No boot there. If I chain-load (or however that's called) my Isolinux - CDs with "Smart

Hi All, I am following: http://www.linuxinsight.com/how-to-flash-motherboard-bios-from-linux-no-dos-windows-no-floppy-drive.html to make a bootable CD to flash my bios I get to mkisofs step, but what I get is not what I think I want. I dont understand if I unmount /tmp/floppy how the Mkisofs command of: mkisofs -o bootcd.iso -b FDOEM.144 FDOEM.144 how I get everything in /tmp/floppy Here is

Hi I have an output data Data.csv this style: ,"V1","V2","V3" 1,"-9552","9552","C" 2,"0","9653","0" 3,"9614","9614","V" 4,"0","9527","0" 5,"-9752","9752","C" 6,"0","9883","0"

Please forgive me if this is a known issue or "feature". I didn't notice anything in the list archives or the docs, so I'm assuming this is a bug. I was attempting to create a bootable LFS cd using the instructions found at http://hints.linuxfromscratch.org/hints/boot-cd_easy.txt. I wasn't following the steps exactly as I had some personal changes I wanted to make. One

Dear all i am using Fedora Core 2 . i have Planet BRI TA with HFC chipset ( hisax ) i can easyly connect to internet using BRI but this card is still not recognized by asterisk i am using i4l driver . some people suggest i should try bristuff from junghanns.net any ideas ? Thanks and Regards Talha

Good day, Here I was trying to write a code for Garch(1,1) . As garch problem is more or less an optimization problem I also tried to get the algorithm for "nlminb" function. What I saw that if use this function 'nlminb" I can easyly get the estimate of parameters. But any other function is not working. I tried to write my own code for optimization using Quasi-Newton

Memdisk 2.08 does not appear to be able to boot an XP DOS image (it starts to boot and then hangs). XP DOS appears to be borrowed from WinME (v4.90.3000). I was trying to make a multiple boot CD with Bart's method: http://www.nu2.nu/bootcd/#multimemdisk but substituting Brads TCP boot disk instead of Barts: http://members.iinet.net.au/~bdriver/bootdisk/index.htm Brad uses XPs DOS as it

Dear R-Users, I have to do a maximum-likelihood estimation and have now a problem concerning how to sum up my function values in a smart way. I don't know how to explain it easyly, so I give you the code and show you where my problem is. I have shorten the code a little bit, so that you only get the necessary facts: ws12 <- function (z, i) (1/(1+exp(z[1]*(z[3]-x1[i]-

On Fri, 2018-07-20 at 10:10 -0500, Michael Hennebry wrote: > On Tue, 17 Jul 2018, Pete Biggs wrote: > > > Check your hardware - all these things might well be symptomatic of an > > hardware issue. > > I'm not at all sure how. > If it means opening the case, > hardware issues are likely to occur. > > Is there a way to tell whether the video > player is

Have been trying some things, but something isn't working at least with using Virtual Box with EFI option. With it off, the cd boots as normal, and works, but with EFI on, it has an error that flashes on screen, and then it drops to a shell prompt. I'm hoping it is just a dumb mistake I am making, and can be resolved. Perhaps I've named the directories incorrectly, or there is a

Hello, I have in the past few days played a bit with libogg. My goal is to learn enough of it to try wrapping current tarkin codecs into an ogg file, with vorbis sound eventually. I did work on a small program which allows you to easyly (de)multiplex Ogg files in a way which seems to conform to the docs. You can do things like: oggmux in1.ogg in2.ogg in3.ogg - mux3.ogg oggmux mux3.ogg -

tom & peter Hi Guys, I have a little problem I'm hoping you can help me with. When I try to boot toms image, memdisk states a "fractional end sector" while loading the image. It continues with the process until I get a "Booting..." prompt and then freezes. Here's the whole story: A while back I acquired version tomsrtbt 2.0.103, to make a multi-image boot cd as

I just checked versions again and it was working up to 3.09. not 3.10 sorry for the confusion -----Urspr?ngliche Nachricht----- Von: syslinux-bounces at zytor.com [mailto:syslinux-bounces at zytor.com]Im Auftrag von Zipf Christian Gesendet: Donnerstag, 29. September 2005 13:54 An: syslinux at zytor.com Betreff: [syslinux] Problem booting bcdw with isolinux 3.11 I try to boot Bootable CD Wizard

Hello all, I am still struggle in my isolinux.cfg I got from http://www.bootscriptor.org/ that memdisk not support Win ME boot disk however, I am using Bart's Multiple boot images (isolinux/memdisk) method (http://www.nu2.nu/bootcd/) and I try to incorporate the method mention in Bootscriptor in Bart's method. I change my isolinux.cfg as label 5 kernel isolinux.bin winme.img label 6

Hi, I am trying to boot from an external USB hard drive (partition 1: Windows, partition 2: primary/bootable ext3). I took the kernel-image-2.6.8-1-368.deb and created a new initrd with all modules, root=/dev/sda2 and Busybox (mkinitrd failed with my own kernel ;-) isolinux.cfg contains: PROMPT 1 DEFAULT sda2 LABEL sda1 KERNEL vmlinuz APPEND initrd=initrd ramdisk=16432k root=/dev/sda1

Ok so I have a 500GB WD "Blue Scorpion" HDD that I'm trying to access via USB, when I boot up my CentOS laptop the lights on the external USB casing light up...and I can hear the drive making noise, but after a few minutes I hear an abrupt "click" and the drive doesn't do anything. I can SEE it in the Disk Utility in CentOS,...I even tried to format it from there as

hi, i'm doing my own windows multiboot dvd's using latest ultraiso and isolinux 3.09, and everything was fine till now. now i tried 3.11 and this release doesn't load any windows cd boot sectors while other stuff like memtest works fine. same for isolinux 3.10, both the normal and the debug version. the attachment shows a vmware 5.5 beta window with an error message by isolinux 3.11

Dear list, I''m about to upgrade a zpool from 10 to 29 version, I suppose that this upgrade will improve several performance issues that are present on 10, however inside that pool we have several zfs filesystems all of them are version 1 my first question is is there a problem with performance or any other problem if you operate a zpool 29 with zfs filesystems version 1 ? Is it better