similar to: ProLiant DL3n0 EMT64 - x86_64 or i686

Hi list! I tried to install Xen 4 in a HP Proliant ML350 G4p, but it seems not compatible, is there another way to run Xen 4 in this server ? I couldn''t find any information on Hp''s site neither Intel''s site ... Thanks ! -- @ntonio _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

Hello, Has anyone out there been able to qualify the Proliant DL360 G7 for your Solaris/OI/Nexenta environments? Any pros/cons/gotchas (vs. previous generation HP servers) would be greatly appreciated. Thanks in advance! -Anh

greetings, for those of you in the know, may i have some assistance in helping to make better decisions in purchasing more used server toys to install CentOS on please? :-) in the Compaq Proliant Rackmount DL380 line, the one that looks like the older 1850R is called a G1 meaning Generation 1 right? and then the DL380 G2 is a redesign that is gray and just has 6 drive bays up front correct?

I have 3 machines, T60 thinkpad with e1000 NIC Dell PowerEdge 2950 with bnx2 NIC HP DL360 G4P with tg3 NIC All running xen 3.03 / 2.6.16.29-xen I have a netbootable image with 2.6.16.29-xenU. This image when it boots creates a vlan eth0.4002, and then tries to communicate on that interface to a central server. On the machines with e1000 an bnx2 NICs, this works fine. On the

On a Compaq DL360 G1 w/ dual PIII 1.27's I installed Centos 5 minimal and then a yum update When I do a "uname -a" I get this Linux tstsrvr.abbacomm.net 2.6.18-8.1.3.el5 #1 SMP Mon Apr 30 19:55:44 EDT 2007 i686 i686 i386 GNU/Linux When I do a rpm -qa | grep kern* I get this kernel-devel-2.6.18-8.1.3.el5 kernel-2.6.18-8.1.3.el5 kernel-headers-2.6.18-8.1.3.el5 It is interesting

I'm looking at ordering a server from HP. I checked around on Google and found in the Wiki that the ProLiant DL380 is supposed to be known to work with *. I'm going to get a price quote on the following setup: HP ProLiant DL380 G4 Server w/ the following options: Intel Xeon 3.20GHz/1MB 2GB REG PC2-3200 (2 X 1GB) HP ProLiant Battery Backed Write Cache Enabler for SA6i RAID 1 drive set HP

Hi, Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? For me the card is detected fine, but the system just never sees an interrupt from the card. I've tried everything I can think of. The card definitely works. Its Fedora Core, but we also tried a stock 2.6.10 kernel. We tried with and without Hyperthreading, with "noapic", we disabled all the

Hello Mailing List I got a severe network error message at a HP DL360 Server. The kernel log says: ----------------------------------- /var/log/messages ----------------------------------------------------------------- Mar 19 15:45:06 server kernel: do_IRQ: 2.168 No irq handler for vector (irq -1) Mar 19 15:45:17 server kernel: bnx2 0000:02:00.1: eth1: DEBUG: intr_sem[0] PCI_CMD[00100446] Mar 19

On Fri, 10 Mar 2006, Herta Van den Eynde wrote: > I'm trying to install Red Hat Advanced Server AS 4 on a HP Proliant DL380G4. > Unlike e.g. the DL360, the DL380 does not have the option to set the OS in the > BIOS. > As soon as the installation starts, i.e. even before you get to the point > where you can enter "boot" and whatever boot options you want to use, the

I have CentOS 6.x installed on a "HP ProLiant DL380 G5" server. It has eight 750GB drives in a hardware RAID6 array. Its acting as a host for a number of OpenVZ containers. Seems like every time I reboot this server which is not very often it sits for hours running a disk check or something on boot. The server is located 200+ miles away so its not very convenient to look at. Is

At my university we use HP hardware exclusively. When we build CentOS our Unix SA is running several HP utilities. I am wondering what some of these utilities are, such as cmaidad. Is it possible to to use these HP utilities to monitor for disk crashes (similar to smartd)? Is anyone using native HP utilities for this purpose? TIA

Hello Everyone, I recently installed CentOS 5.5 x86_64 on a brand new ProLiant DL380 G7. I have identical OS software running reock-solid on two other DL380 ProLiant servers, but they are G6 models, not G7. On the G7, the installation went perfectly and the machine ran great for about 2 weeks, when it just seemed to "stop". The system stopped responding on the network, and there was

I'm trying to find the right Digium card for the Dell 2950 Dell 2850 HP DL380 G3 HP DL360 G3 Are these 3.3v or 5.0v machines ? I am out of the office, and need to buy a card today. I am looking at either the TE407 or TE412, and would appreciate any help. :) Julian

I've been seeing some random Proliant DL380 G4 64bit crashes. Each time, on the console are messages relating tojbd2/cciss and something about a waitfor 120 seconds. Is anybody else seeing anything like this? Oddly, I can't seem to find this in the logs. I guess it can't write when this happens. -- John Hinton 877-777-1407 ext 502 http://www.ew3d.com Comprehensive Online

Hi folks, We use CentOS 5.2 (with latest errata) 64bit on DL380 G5 and trying to install psp-8.11.rhel5.x86_64.en.tar.gz. After installing dependencies (like kernel-devel, rpm-devel, etc): # ./install811.sh Saving user-defined agent thresholds... [ Done ] Checking system for required packages... [ Done ] ./hpplduioss: error while loading shared

Greetings, Can anyone relate experience(s) installing CentOS on Compaq rack mount servers units please? Easy no problem, easy some issues, or ghastly do not do it under any circumstances... ;) Basically, I'm looking at some used/refurb dual PIII units and will run RAID on Compaq built in SCSI or is it easy to pop in some 3ware SATA in them? Let me know in terms of CentOS 3 and/or 4 please.

From: Tony Wicks <tonyw at tonyw.com> > I run Centos on Compaq dl380g1/2/3's and Dell servers. While the > Compaqs are strong hardware they are old and frankly the performance > compared to modern (cheap or otherwise) hardware is not really that > impressive. A dual 1 gig P3 dl380 and ultra 3 scsi drives get significantly > out performed by a generic celeron with software

HP doesn't support Fedora on Proliant hw so you can't just install their ILO and get access to hw info like cpu/mb/temperature,powersupply status,fan info aso. I used the link below to get that access, which enabled me to write a small script that sends snmp-traps to hp-ovo. I did spend quite some time myself until I found this link.

Hi to all, I am in the process of setup a new asterisk server, I think in the HP Proliant ML350 G6 Server (aprox. 100 SIP Users), and Sangoma A102DE Card. The specs of the Proliant (HP PART 487932-001) about PCI are the next. 1 ( 1 ) x PCI Express 2.0 x16 ( x8 mode ) , 1 ( 1 ) x PCI Express 2.0 x8 ( x8 mode ) , 4 ( 3 ) x PCI Express 2.0 x8 ( x4 mode ) The question is, if

Hi *, I'm running into a problem configuring bonding on an HP DL 360 G4p, running 4.3 + tg3 driver version 3.43f. I'm connecting eth0 and eth1 to a Cisco 2948 (CatOS 8.1(3)) and receiving flapping notices. The ethernet address is that of the primary interface. I have tried several different modes, including balance-rr (0), active-backup (1), and balance-alb (6). All have the