similar to: Minor idea - "Press any key to boot within 5 second" style of thing...

Hi, all I can't boot from local drive on some machines(thinkpad x200 and thinkpad x1 carbon) using syslinux 3.05 or syslinux 4.05. And i change localboot 0xffff to localboot 0x80, boot from local drive is available. I find "0x80 is the primary hard drive. The special value -1(0xffff) causes ISOLINUX to report failure to the BIOS, which, on recent BIOSes, should mean that the next

I have tried "LOCALBOOT -1" , it still didn't work. ? 2014?02?25? 12:44, Gene Cumm ??: > On Mon, Feb 24, 2014 at 10:27 PM, ?? <lei.xia at cs2c.com.cn> wrote: >> Hi, all >> >> I can't boot from local drive on some machines(thinkpad x200 and >> thinkpad x1 carbon) using >> syslinux 3.05 or syslinux 4.05. >> >> And i change

<Docs> LOCALBOOT type [ISOLINUX, PXELINUX] On PXELINUX, specifying "LOCALBOOT 0" instead of a "KERNEL" option means invoking this particular label will cause a local disk boot instead of booting a kernel. The argument 0 means perform a normal boot. The argument 4 will perform a local boot with the Universal Network Driver Interface (UNDI) driver still

Hello, Starting version PXELINUX 3.83 2009-10-05, i am not able to boot anymore using "localboot 0" entry. It show "" Booting from local disk... """ Then loop on the network boot of the interface then after a few try show the message: """ It appears your computer has less than 268K of low ("DOS") ... Boot failed: press a key to

Hi, we use PXELINUX in our product to show a boot menu on client computers, with options like "Boot from local hard disk", "Install Windows", etc. Unfortunately, a lot of computers seem to have broken BIOSes and won't boot with the LOCALBOOT command, and need to be booted with chain.c32 instead. We also have encountered some computers where it works only the other way -

Help everyone... I need to track the spread of a BIOS bug. One symptom of this particular BIOS bug is that with pxelinux.0 from Syslinux 3.83-pre9, "localboot 0" works, but *if pxelinux.0 chainloads itself first*, then "localboot 0" *does not work*. I have reasons to believe this is a fairly widespread bug among newer hardware (made in the last two years or so), and it is

git://git.zytor.com/users/genec/syslinux.git Branch doc-syslinux-for-hpa Expand upon the explanation of the usage of CONFIG (including a new directory). Edit LOCALBOOT to include the fact that all variants understand LOCALBOOT type -1. Compact the PXELINUX section to one paragraph. -- -Gene

Hi, I have boon Googling quite a bit on this, but is it possible: I want to build an ISOLINUX boot CD, but want one of the option to be "Continue booting from hard drive" and thus disregard booting from the kernel on the CD. Is it possible? Or what can I do to force a HD boot from ISOLINUX.CFG? Thanks Herman Starship Systems

Hello * this morning I tried to upgrade from pxelinux 3.11 to 3.84 and discovered that the localboot stuff does not work on HP DL360 G3 and G5. The latest syslinux Version I found with a working localboot is 3.36. pxelinux.cfg/default: default harddisk prompt 1 label harddisk localboot 0 implicit 0 timeout 250 This so simple, it should just work, shouldn't it? The

So the short summary of my problem is, the batch file rsync creates is HUGE for a very small change. The idea is to create workstation image with partimage, update it with some software and send the image update diff over the wire to a large number of destinations over a satellite link, but the batch file updates are several orders of magnitude too large. I don't know exactly how partimage

Hi, I am having some problem with LOCALBOOT and menu.c32 This is my isolinux.cfg: ------------------------------------------- default menu.c32 timeout 50 prompt 0 ontimeout local menu title "TITLE" label livecd menu default manu label "LiveCD" kernel gentoo append initrd=initrd.igz root=/dev/ram0 init=/linuxrc looptype=squashfs loop=/ livecd.squashfs

Hi, I've been writing an optimization pass (described on the ML previously). Sometimes this pass removes some case entries from switch instructions, which cause an abort because removeCase() doesn't fix the PHINodes predecessors when needed. e.g.: define i32 @foo() nounwind { ifthen: %call = call i32 @bar() switch i32 %call, label %myphi [ i32 0, label %ifelse i32 1, label

Hi everyone, I have released Syslinux 6.03. It is by and large identical to 6.03-pre20. I would like to do a short cycle for 6.04, because 64-bit support for ext4 has come up as a very high priority. Therefore I do not want to stuff too many things into the 6.04 release but hold them for 6.05. Thanks to Ady for most of the changelog. Changes in 6.03: * chain: Fix chainloading on 6.02

Hi all, I have released SYSLINUX 2.09; it is the same as 2.09-pre15 except for the version number. Changes in 2.09: * SYSLINUX: Remove residual setuid crap from syslinux-nomtools. * Handle video pages correctly when using the API functions. * Handle compiling on an x86-64 platform correctly. * Menu system from Murali Krishnan Ganapathy; see the

Hi, I've been using Isolinux Boot CD for a while now and it's working great. This weekend, I decided to install it on my hard drive so I can boot Isolinux of the Hard drive. I used the famous command : "syslinux -s c:" to initialize the drive then I copied all the .img file to that drive. Then I renamed the "isolinux.cfg" to "syslinux.cfg" to get to my

I apologize in advance that this question is not specific to R, but I thought some R users may be using this in their work process flow. I would like to be able to have a tool (prefer "scriptable") that will take two images and some pre-written text and put it on an simple webpage. That is, it would look something like the following: |---------------------------------------------|

On Aug 11, 2008, at 2:02 PM, Benedict Gaster wrote: > We would like to develop a code generator using LLVM for a target > language that does not support conditional branches and in fact only > supports structured control flow, eg. If and while. What's the difference between an "if" and a conditional branch? > As far as I can tell that the problem with doing this in

> OK, attempting one more convergence on all this, here's > what I did: > > 1. Reverted back to rev 1.5 of src/libFLAC/ia32/Makefile.am > 2. Applied Matt's last cleanup patch of 8 files. I did not > apply the patch to src/test_unit/main.c since it looks wrong. > main.c is supposed to include the local bitbuffer.h, not > src/libFLAC/private/bitbuffer.h; I think the

I'm bringing back an old thread, but I'm still having problem with this: http://etherboot.org/pipermail/gpxe/2010-March/000571.html The summary of that thread is that with gpxelinux.0, on some computers the command LOCALBOOT 0 will hang the computer. Around the same time as the original thread, there was a patch to add localboot -1. Also in the original thread, it was proposed to use

Booting from the USB requires that there is a syslinux directory to boot off of. In EL6, there is only isolinux, which is what booting from a DVD uses. You should be able to copy isolinux to syslinux, rename the files from s/iso/sys/ and then update syslinux.cfg to point to the USB drive to boot from. Here's an example from my setup: ==== LABEL next MENU LABEL ^A) Boot the next device