similar to: IPtraf not looking right on the console..

hi there, I just wanted to share a recent discovery I did on how to setup a secure VPN implementation for linux 2.4.x (I''m using 2.4.20 but it should be working, as far as documentation states, for > 2.4.18) without using FreeS/WAN. The tool (ipsec_tunnel: http://ringstrom.mine.nu/ipsec_tunnel/, by Tobias Ringström) is a kernel module based on ipip and ip_gre. It uses CyptoAPI to

Hi Friends, I am new to linux and new to asterisk. I need some help setting up asterisk in my linux box. Does anyone have a step by step guide ? On my PC i have installed a phonejack (from Quicknet) as well. Your help is appreciated.. I kind lost.. thanks, _________________________________________________________________ Expand your wine savvy — and get some great new recipes — at MSN Wine.

Hi All, How to park and pickup a call? The scenario of park and pickup described as below. UserA made a call to UserB, and the call ware connected, Then UserB parked (or hold) the call, and told UserC to pickup the call on one line, and then, UserC pressed some keys to pickup the call. Who can tell me what's the Park/Pickup's typical flow in the Asterisk. And how to set the sip.conf,

Anyone had any experience with an Asterisk server as a VMWare virtual machine?

Hello Everybody, I have configured a Linux box that does traffic shaping. Its working wonderfully fine, just as expected...Now i want to measure the bandwidth consumed by each of my hosts....But I dont want SNMP to run on all the hosts[as required by MRTG] I used iptraf on my linux box, but it only measures the bandwidth on interface basis only.... I tried installing traffic-vis, its not working

Hi- I have posted a photo of the TE410P Digium card on my site, so that those wishing to purchase a compatible motherboard can see physically what the PCI slot requirement is: http://www.evtmedia.com/TE410P.htm I believe the required slot is a 64-bit, 3.3 Volt PCI, most commonly found on Xeon-based motherboards. A 64-bit slot is longer than the TE410P board requires, but the PCI connector

Hello ! I use Slackware Linux on a box for routing and SNAT for a small network: |eth0: 80.97.108.1| | | |eth1: 192.168.1.1| ..........| my network (192.168.1.0/24)| I search for a tool show-me on real time the trafic made by all/one IPon the interface eth1, somethings simple ; EX: 192.168.1.10 ........... x kbit/s 192.168.1.11 ........... y kbit/s 192.168.1.12

I am using HTB+IMQ on an Ethernet bridge and tc for statistics reporting. I am finding that tc reported rate is about 5-10% less than that reported by IPTraf for the same traffic. Has anyone observed this before? Which is more accurate? Rajesh

Hi, Can anyone please recomment an ntop alternative for me, which is more stable as well? I need to monitor all connections to and from a CentOS 5 server and ntop does it fairly well, but seems to crash at random times, and thus looses all the date prior to the crash. Cacti / MRTG only gives complete bandwidth usage on the given interface, but I need to know how much bandwidth goes where, and

Here is a question for all you routing guru's out there.. I am using an ADSL line (512/256Kbps) to connect from the internet to my Asterisk server.. At a point I will run out of bandwidth so the cheapest option would be to add a second ADSL line.. The problem is how will the routing work? If I put 2 IP's on one NIC will the return traffice be routed back via the gatway of the IP that

Hi, Here is the situation.. My Dad is working on contract in overseas.. He has internet access in his hotel.. He wants to be able to talk to my Mum but the calls are expensive.. I have an asterisk box setup for my business and it has a public IP etc.. My Mum has access to a working phone extension on this box.. I got my Dad to install X-Lite but for some reason it won't register and

ok .. a use iptraf, but iptraf show my evry connection from computerX: 84.135.15.81:4899 > 163 7940 --A- eth0 ? 82.77.210.7:3475 > 212 323323 -PA- eth0 ? 62.231.96.133:80

Hi All, I am wondering what tools are available in CentOS 5.5 that would allow me to measure incoming and outgoing network speeds? My new website seems to be getting a lot more traffic that I had anticipated off the bat and I would like to measure resource usage to ensure it is keeping up. I know that top only measures CPU Best, -Jason

This is troubling. Shouldn't your hubs/routers autosense the 10MBPS? ---------- Original Message ---------------------------------- From: WipeOut <wipe_out@lycos.co.uk> Reply-To: asterisk-users@lists.digium.com Date: Wed, 15 Oct 2003 07:53:13 +0100 >Steven J. Sobol wrote: > >>On Wed, 15 Oct 2003, Jon Pounder wrote: >> >> >>Nothing works. Call transfer

----- Original Message ----- From: "Jess Magnaye" <jess@arretni.com> To: <wipe_out@users.sourceforge.net> Sent: Tuesday, January 06, 2004 3:19 PM Subject: Re: [Asterisk-Users] Pls confirm > Is the format "allow=g723.1" in sip.conf valid? > > somehow i cannot get it working to do g723 passthru. also, i've read that > doing g723 will disable

This is not really a problem just something I noticed in my testing.. When two or more Asterisk servers are connected by IAX2 trunks it does not make use of any "shortest path" type system.. (maybe this is still planned somwhere down the line, but may come in handy to those who have multi asterisk installations) Here is the setup.. UA1--- Asterisk1----[IAX2 Trunk]---Asterisk2---UA2

Hi.. Does anyone have any ideas how to speed up CentOS when its running as a guest OS under VMWare server?? It seems to be really slow...

Please can someone look at my last two posts and try and shed some light onto why my system is dropping calls.. If I don't get it right we will be forced to drop Asterisk which I really don't want to do.. Thanks..

I am soon going to be setting up a box to run VMware server but have to make the choice between Centos 4.x or 5.x.. I have tested both and VMware installs in both.. So are there any pros or cons to either version or does it make no difference at all? TIA