similar to: Report of incompatability [pxelinux] - (long ago fixed)

Hello, The harddisk of my etch/bristuffed asterisk1.2 box finally died. I moved the cheap (1397:2bd0) HFC-S card to a squeeze host (i686) and built dahdi modules 2.3.0.1 using m-a. After zaptel->dahdi and asterisk 1.2->1.6 config adaptations, everything seems ok, except for the BRI side, unable to bring layers 1/2 up. Asterisk reports: chan_dahdi.c:12393 dahdi_pri_error: 1 Unable to

Has anyone got a Premisys Slimline channel bank working with a Cisco AS5400 or similar? I'm not sure if my unit is bad, or what. I'm using FXS Loop Start. Calling the port connects immediately without ringing the attached phone. If I pick up the phone, it's connected and I can talk to the caller. Hanging up has no effect. I can see the bit transitions (0101 to 1111 when I go

Hope this list is for ices support too :) When I try and start ices with a simple config file it barfs and isn't happy [root@deskpro bin]# ./ices -c /usr/local/icecast/etc/ices.conf Cannot use config file (no XML support). Ices Exiting... But if I pass basically all the same paraemters via the command line it's fine streams PERFECTLY! [root@deskpro bin]# ./ices -P passwd -F

Hi all, I''ve just built Mandrake 10.1 on a Compaq Deskpro that I''ve built as a router/firewall and am redirecting port 80 outbound to force users through the Content Filter. I''ve run this setup on Mandrake 9.0 and 10.0 without any problems but this time the following happens. Squid is accessed through port 3128 and Dansguardian via 8080. If I set my browser on a

I'm looking at ordering a server from HP. I checked around on Google and found in the Wiki that the ProLiant DL380 is supposed to be known to work with *. I'm going to get a price quote on the following setup: HP ProLiant DL380 G4 Server w/ the following options: Intel Xeon 3.20GHz/1MB 2GB REG PC2-3200 (2 X 1GB) HP ProLiant Battery Backed Write Cache Enabler for SA6i RAID 1 drive set HP

I configure an old Compaq Deskpro workstation to boot LTSP using PXE and DHCP. I have an error that say TFTP Open Timeout after this workstation got it IP Address from DHCP server. I have done some configuration settings, and this workstation can load the kernel (vmlinuz-2-4-18-ltsp-1), but after loading the kernel, there only flashing characters and colors on the screen. I also have do chmod

I have been playing with 2 Asterisk boxes for testing purposes, it has been going very well. The 2 boxes are PII celeron 400 (HP Deskpro) with sound cards and lan. I have iax connecting the 2 boxes. For making cals and testing out recorded message for 1 connection it was working quite well. However, when I stressed it a bit with 2 users making calls, we started to here voice degradation and

I'm on redhat and libxml2 is installed: [root@deskpro davidcam]# rpm -Uvh libxml2-2.4.23-1.i386.rpm warning: libxml2-2.4.23-1.i386.rpm: V3 DSA signature: NOKEY, key ID db42a60e Preparing... ########################################### [100%] package libxml2-2.4.23-1 is already installed I complied ices/icecast fromm src - do I need any addtitional flags in ./configure?

I need a cheap platform for installing a tdm400. Could someone tell me if the cheap cpubuilders computer at sams $179 (cbs110l) is pci 2.2 compliance? I ve got a compaq deskpro en 700 that does not seems to be compliant and I need to change it to start developing. Thanks for the help. Computer Model: CBS110L --------------------------------- Do you Yahoo!? New and Improved Yahoo! Mail

On the cheap side, the ITX or even MicroATX machines work great. These are commodity items, so they tend to be far less expensive than custom solutions. Various manufacturers, but we've had very good success with any of the AOpen MicroATX boards and their slimline MicroATX case: Aluminum: http://usa.aopen.com/products/housing/A340-series.htm Steel:

Hello, I already searched on the mailing list, but I didn't found a solution to my problem. I can't install chan_capi anymore. It has been running very well but then I run into trouble. so I decided to update to the latest CVS version of asterisk and of chan_capi. But now I can't compile chan_capi anymore. I'm running SuSE 9.0 and I think the problem is caused by an update that

Hi, all ^^ I configure an old Compaq Deskpro workstation, and booting up linux using pxelinux. I have a big trouble I guess. :-( my workstation didn???t success loading the linux. When finished loading the kernel (vmlinuz-2.4.18-ltsp-1), there is flashing colors and characters on the screen. I???ve tried doing chmod 777 on the kernel file but it still didn???t work. Does anyone have any

I have looked through FAQ's and bug reports but found nothing substantial regarding a problem I have with R running under Linux. I have installed R from the current Debian release on a Compaq Deskpro (Pentium 75). I have used a display server called Accelerated X because I could not configure Xfree86 properly for the video card (Compaq QVision). I am using the icewm window manager. Other

Hey Peter, rest, I'm trying to boot a linux-kernel tru pxelinux, but it hangs while initializing the CPU. When I boot the kernel from floppy everything works, but trying to boot the same kernel with pxelinux results in a choking kernel. If I touch the keyboard after it hangs, it panics. I'm using: - homegrown Linux-2.4.21-preSomething-acSomethingElse (booting well from a floppy disk

Hi, I need to know from your experience which is the minimum hardware configuration (proc./memory) to run * with two X100P cards and around 10 internal IP phones (from which 4 are hardware ones and use G.711, the rest of them with GSM), with a couple of IAX connections with other Asterisk PBX'es (GSM too). Have someone tried to build a graph about the dependencies between hardware

I get echo on my X100P for about 15 seconds then it disappears. Believe me, when I get a chance I'm going to tweak it since my wife nags me about it. I converted my house over to *. My setup: Compaq Deskpro EN SFF P3 500 Dual NIC for real IP and internal IP X100P Card for PSTN. Cisco ATA186 (two cordless phones for the old lady) Cisco 7960 Phone Cisco 2621 w/ 2 FXO's and 2 FXS (Fax is

Yup I have the devel package installed too. [root@linux1 davidcam]# rpm -Uvh libxml-devel-1.8.17-1.i386.rpm warning: libxml-devel-1.8.17-1.i386.rpm: V3 DSA signature: NOKEY, key ID de95bc1f Preparing... ########################################### [100%] package libxml-devel-1.8.17-1 is already installed Thanks Dave <p>-----Original Message----- From: Geoff Shang

> Do you also have the devel package? yes I do Dave -----Original Message----- From: Geoff Shang To: ''icecast@xiph.org' ' Sent: 12/26/02 6:58 AM Subject: RE: [icecast] Ices won't read config file? On Wed, 25 Dec 2002, Campbell, David wrote: > I'm on redhat and libxml2 is installed: > > [root@deskpro davidcam]# rpm -Uvh libxml2-2.4.23-1.i386.rpm >

Hello all, I am using a headset and the X-lite softphone (sometimes I use IAXComm, but I'm having difficulties using OSS emulation with it) to connect via uLaw to my internal Asterisk server, which is a Pentium II 400 with 128 megs of RAM. After getting this headset, most or all of the echo people on the other line were complaining about is now gone, according to them. However, every

tags 354429 + upstream thank 2006/2/26, suicune@eml.cc <suicune@eml.cc>: > Package: nut > Version: 2.0.1-3 > > > This is the spam message: > drivers/usb/input/hid-core.c: ctrl urb status -32 received > > I never once saw this message until after I installed and configured > nut. > > Spam begins during boot and continues infinitely until reboot or nut is >