similar to: minor docs patch

hpa, etal, pxelinux works great from a push of the reset button. machine boots normally. However, after i issue 'reboot' command, my box fails to find the tftp server during reboot. This looks to be happening before pxelinux has any chance to participate, so it cannot be to blame. Im seeking corroboration here before I go badgering the bios-provider here's the relevant

Hi, i'm trying to get my VIA Epia with VIA Rhine ethernet device to boot PXELinux. I have done this before, but now i can't get it to work. The machine loads pxelinux.0, i see some messages. But it fails just after trying reading the first config file (the one with the mac address). It kinda says this (transcribed): CLIENT IP: 192.168.1.23 MASK: 255.255.255.0 DHCP IP: 192.168.1.93

Hi! We use Windows tftp-servers (so I dont think switching now would be an alternative). But I can try to suggest it. More specific, vendor id of the mac address, is what I want to be able to "choose" (if match) which bootmenu to display. Like all broadcom NICs we have would boot the undionly.kpxe "menu!! (I am having some trouble with broadcom (PCI fiber) and iPXE :) And the

Hi all, i have trouble to PXE boot KVM-based (network of Linux-bridge) Virtual Machines: very slow transfer pxelinux.cfg. ====== tcpdump on KVM host system ==== [root at kvm-test01 ~]# tcpdump -i virbr1 | grep -v ssh | grep 10.0.5.187 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on virbr1, link-type EN10MB (Ethernet), capture size 96 bytes 17:57:29.809278

On Fri, Sep 27, 2002 at 05:00:35PM +0200, Steve wrote: > check you network, sounds like a hardware problem. > ARP is the Address Resolution Protocol and is a low level ethernet protocol. > > check this site out for more info > http://whatis.techtarget.com/definition/0,,sid9_gci213780,00.html > > Thanks for the comment. I got the same error (PXE E11 ARP timeout) with two

Hi there. Regarding currently known problem as stated on http://syslinux.zytor.com/pxe.php: we should probably call the UDP receive function in the keyboard entry loop, so that we answer ARP requests. Here's another illustration of the problem, description of related pxelinux problem and workaround for both problems. Configuration: dhcp/tftp server -- 213.180.194.116 (00:1B:78:05:84:6C)

Hi, I was wondering if anyone had a good dhcpd.conf and /tftpboot files for a EPIA-M motherboard with RedHat 9.0.... Or maybe just a configuration that works with the EPIA-M (doesn't matter which type of linux). I'm trying to boot the system from the network and it seems to be getting to downloading pxelinux.0 but then nothing happens after that.... I'm using ISC dhcpd V3.0pl2,

I have just tried syslinux-4.00-pre5-3-g25fb8eb on Bochs + etherboot and it doesn't seem to work: PXELINUX 4.00 pre5-3-g25fb8eb Copyright (C) 1994-2009 H. Peter Anvin et al !PXE entry point found (we hope) at 9F00:0680 via plan A UNDI code segment at 9F00 len 0AB0 UNDI data segment at 9E00 len 1000 Getting cached packet 01 02 03 My IP address seems to be C0A80178 192.168.1.120

Hi, I'm trying to boot a clean machine(hostname=dgrid-5.srce.hr) with 3com 3c905b NIC (ver4.30 MBA) with pxe. Server: hostname: dgrid-1.srce.hr pxelinux.0: syslinux-2.08 tftp: tftp-hpa-0.36 dhcp server: dhcp-2.0pl5-8 Client: boot option: DHCP Client machine successfully gets pxelinux.0 and then everything stops(see listing below). I've tried with xinetd-2.3 and

Hello Ady, On 23.07.2014 16:21, Ady wrote: > FWIW, you have not mentioned specifically updating to BIOS version > A11 before trying A15. I started with A05, updated to A10, then A11 and now A15. >

On 07/12/2014 02:24 PM, Gene Cumm wrote: > On Sat, Jul 12, 2014 at 3:15 PM, Alexander Perlis <aperlis at math.lsu.edu> wrote: >> On 07/11/2014 09:39 PM, Gene Cumm wrote: >>> >>> With everything else from 6.03-pre18, try this binary (xzip-compressed): >>> http://www.zytor.com/~genec/lpxelinux-6.03p18g3.tgz >> >> It works! Thanks! > > Oh

On Mon, Apr 03, 2023 at 12:52:41PM -0400, Rob Roschewsk via Syslinux wrote: > Hi All, > > I have a situation where I want to netboot and ONLY use pxelinux.cfg/default. > > It seems to take FOREVER for pxelinux to try all of the config file > file options before falling through to default .... trying each > possible combination multiple times ... increasing the wait time >

Hi Gene, Am 05.07.2016 um 12:42 schrieb Gene Cumm: > Version 6.03. Is this a distribution build or fresh from the > binary/source archive from kernel.org without any running of 'make'? it's actually a freshly downloaded lpxelinux.0 from kernel.org. I get: $ md5sum lpxelinux.0 d77a175ea1a0a8c05b315d179992e1bd lpxelinux.0 >> nothing more. Sniffing revealed that there are

We encountar a somewhat odd problem. We use pxelinux to boot a linux cluster and when we reboot all 103 of the nodes some of the won't start since the tftp-servere looses the arp-entry _between_ it downloads the pxelinux.0 and the config file! pxelinux doesn't seem to answer the arp-requests either in this phase. We run linux 2.4.22 on the tftp-server which also is dhcp-server and

Matt Fleming wrote: > > > > > The big thing I notice is just that since 5.10, the > > > > > code in pxelinux.0 does DNS queries for specific calls rather than a > > > > > dotted quad conversion first. > > > > > > > > That *was* relevant. It did not work until I replaced the dotted quad > > > > address with the DNS

I have DHCP and TFTP on a Solaris machine, pxelinux.0 loads, but it can't load the configuration file. The tftp server on Solaris tries to send the file, but data transfers do not receive ACKs. Previous posts to this list have indicated that the suspect was the PXE BIOS (ref "PXELinux can't load the config file?" dated March 20, 2003). Does that still appear to be the case

Hi All, I am still having troubling with PXE. Thanks for replying Shao.I did follow ur suggestions and my results have improved a bit.From Ethereal and TCPdump, I can see that the client sucessfully dowloads the file pxelinux.0 from the server but stops at this point. here is the output of tcpdump tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 11:05:41.966864 IP

On 07/10/2014 06:39 PM, Gene Cumm wrote: > On Thu, Jul 10, 2014 at 7:24 PM, H. Peter Anvin <hpa at zytor.com> wrote: >> On 07/10/2014 04:07 PM, Alexander Perlis wrote: >>> Trying to PXE boot a Dell Optiplex 990 with BIOS A16, which has Intel >>> Boot Agent 1.3.81 (2.1 build 089). It gets network and launches >>> lpxelinux.0, I see the PXELINUX banner line,

I have spent a couple of days and quite some time during the nights googling and experimenting in pursuing subject objective and I feel like failing, if I cannot get competent help: My objective: boot a FreeBSD-package over the network by Systems lacking HW-Support for PXE My Testconfiguration: Server IBM-PC300 Client Siemes Fujitsu ErgoPro with freeBSD6.0 installed Network card in

Hi! As documented: http://www.syslinux.org/wiki/index.php/PXELINUX When pxelinux "boots" it is looking for this: /mybootdir/pxelinux.cfg/01-88-99-aa-bb-cc-dd /mybootdir/pxelinux.cfg/C000025B /mybootdir/pxelinux.cfg/C000025 /mybootdir/pxelinux.cfg/C00002 /mybootdir/pxelinux.cfg/C0000 /mybootdir/pxelinux.cfg/C000