similar to: memdisk Trouble

How well do you think asterisk could run on a miniITX board like the ones linked below with the call volume of say a small doctors office or something? http://www.mini-box.com/s.nl/sc.8/category.15/.f - Mark -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061229/638e4426/attachment.htm

Hi, just tried memdisk - it works, even with token-ring network cards! I've some problems with dos 6.22 on one machine, though. This one doesn't have a floppy controller (e.g. linux reports that it didn't find any controller). The Dos 6.22 boot disk is loaded, then the boot sector is started and tells me that it can't load the system (German message: 'Kein System oder

First of all, My apologies for this maybe slight OT post, but I have so much confidence and read so much good replies on this list, that I am still asking my question. I''m looking for a linux distribution to use on our school''s homemade routers. The routers are small miniITX based systems with 2 network interfaces. I added a 4 port D-Link network card in some cases, when I

Hello, We're about to deploy an Asterisk system. So far we have the following (below) configuration but before we start anything we would like to hear some suggestions on it, specification or recommendation too... Thank you! miniITX board dual core CPU 2 LAN 1x IDE (or more) 2x SATA (or more) 2x PCI slots (must work with Linux correctly in regards to IRQs) Optional: On board hardware RAID

Hi all I would like to install the minimal level of Centos, with yum & selinux on my servers during the basic install from CD with Anaconda and then use yum to install whatever application is major on that server, so that yum installs its dependencies only, thus keeping to the target of installing only what is needed on a server. Please advise pros/cons of this approach and how to do it. I

All- Ah, the saga of the 1U workstation continues. So, in all my work configuring the thing, I completely forgot about AUDIO; I only realized my mistake when I went on a cable-measuring expedition this morning. Unfortunately, none of the 1U servers I've been looking at come with audio outputs (there aren't even audio headers on the motherboard), and I've used the only availabnle slot

Hi list, i tried to write my first type and provider that should create logical volumes. Seems like i''m missing something as i get nothing when i use it: No errors and no logical volume :-( type/logicalvolume.rb: ================= Puppet::Type.newtype(:logicalvolume) do @doc = "Manage logical volumes" ensurable newparam(:lvname) do desc "The logcal

Hallo Liste Derzeit mache ich meine ersten Gehversuche mit Linux (SuSE). Bis jetzt habe ich in einem kleinen Netzwerk f?r meine Tauchschule vier Rechner betreut. Einer davon war WinNT-4.0 Server und Arbeitsplatz zugleich. Nachdem ich nicht mehr bereit bin, mich mit dem w?chentlichen "blue screen" und dem monatlichen Neuinstallieren von NT abzufinden, bin ich derzeit beim Umsteigen auf

Is there anyone who has successfully put together a "high-powered" mini-itx ZFS box that would be willing to post their system specs? I''m eyeballing the KI690-AM2... http://www.albatron.com.tw/english/product/mb/pro_detail.asp?rlink=Overview&no=239 ...but am having a difficult time locating it and a suitable case currently. I was in negotiations with a hardware source,

Hello, does this sound as a good combination, mini-itx board with Atom dual core 1.6ghz 2G ram and a sangoma USB? For a setup with PSTN for incoming and IAX2(alaw/gsm) for outgoing calls. - Would you say its a good choice from a hardware perspective? - Roughly how many concurrent calls would one of these be able to handle? Regards, Veselin K

So, having returned from a month's vacation, I'm back to work on attempting to build a set of small form factor CentOS compatible computers. I've really tried to do my homework, but this doesn't appear (at first glance) to be at all easy. It's not made easier by the fact that I have to get it right the first time (and I haven't built a PC in a decade); the time and money

Hi Everyone, I've got kids who are growing older and I want to build a Linux box to filter Internet access. I've got six computers on the Internet, plus the laptops -- most run Windows. I'm not sure if it's called a router or gateway or...? I don't mind doing the leg work, I just don't know where to start. I'm pretty sure I'm *not* looking for a web server (though

Hi list, It seems that when playing several OggVorbis files under xmms, there is a memory leak. It's a rather annoying problem because when you have a playlist of 100+ files, xmms will at the end eat something like 100M or more.. Such a memory leak have been reported inside xmms-1.2.2 code and I could see it playing Ogg files and mp3 files ; upgrading to 1.2.3 solves the problem with mp3

Are the latest updates for Samba ( 2.2.7a ) available on the mandrake update system yet ? Mr Smiley

FYI -------- Original Message -------- Subject: IPAPPEND on http://syslinux.zytor.com/faq.php#config Date: Mon, 31 Jan 2005 15:20:00 +0100 From: Pascal Terjan <pterjan at mandrakesoft.com> Organization: Mandrakesoft To: david at weekly.org Hi, I needed to get the MAC from which we booted using pxelinux (in order to know which interface we used to boot). I found reading the source that

I know that this is not a pxelinux/syslinux question (yet), but I am having a weird issue with a HP ML370. It is using HP UNDI PXE 2.1 (build 082) v 3.1.15 I successfully get an IP address from my DHCP server, but the machine fails when it attempts to make it's TFTP connection with: "PXE-E32 - TFTP Open timeout" It never gets the pxelinux.0 file. The odd thing I noticed was

Hi All, Can anybody point me to a site where there is good up to date documentation on how to use Win2000 authentication for a samba server? Thanks, Craig

I am new to this ML and am sorry if this question has been answered already. I have a firewall router running Linux having two Ethernet ports (i.e. access to two networks) for INTRANET and INTERNET. This firewall needs to run smbclient to access a share on a Win2K host in the INTRANET. Looking into the Linux kernel message log, I found smbclient is broadcasting NetBIOS name service queries to

I saw a section entitled "PXELINUX and the Windows Remote Install Server", but there was nothing below it. I'm trying to figure out how to do this. Any advise would be appreciated. Do you suggest PXE, Etherboot, or Netboot? Could someone explain the difference? I still haven't figured out how all this fits together yet. Thanks.

Hi, I successfully boot up diskless client to DOS. In my dhcpd.conf, I have specified the MAC address of each network card like : host client1 { hardware ethernet xx:xx:xx:xx:xx:xx; } When I removed the host client {...}, my client will not get the DHCP address. I do not wish to key in thousands of MAC address in the dhcpd.conf when I implement this. Any help? Thanks.