similar to: (no subject)

Hi, I've been trying to setup a dual livecd. However I am getting an error with parsing the isolinux.cfg. I am using 3.84. the relevant section of the isolinux.cfg is as follows label LiveCD1 kernel vmlinuz1 append livecd=livecd1 initrd=initrd1.gz root=/dev/rd/3 acpi=on splash=silent vga=788 keyb=us fstab=rw,noauto label LiveCD2 kernel vmlinuz2 append livecd=livecd2

Am 03.07.2013 14:11, schrieb Matt Fleming: > On Wed, 03 Jul, at 12:22:52PM, Andreas Heinlein wrote: >> Hello, >> >> I am currently trying to get the gfxboot archive from Ubuntu 12.04 >> working with gfxboot.c32 under BIOS, using ISOLINUX 6. >> >> AFAIK, the Ubuntu patches have been added in 4.03, and in fact it >> works with the official 4.05 release,

On Fri, 10 Mar 2006, Herta Van den Eynde wrote: > I'm trying to install Red Hat Advanced Server AS 4 on a HP Proliant DL380G4. > Unlike e.g. the DL360, the DL380 does not have the option to set the OS in the > BIOS. > As soon as the installation starts, i.e. even before you get to the point > where you can enter "boot" and whatever boot options you want to use, the

Hi Folks, When I boot ISOLinux, the locally attached disk is visible but the PATA 40 Gig in a USB attached enclosure is not. The locally attached disk has no bearing on what I am doing and to avoid confusion will not be mentioned again. Everything is happening on the 40 Gig. Let me explain. The goal is: Copy an installation iso to the disk, boot the disk and install it on that disk. I have

We have a system that is designed with no VGA port, graphics card, or keyboard, only a serial console. We're trying to boot a Linux via ISOLINUX. The problem is that when ISOLINUX comes up, the screen is usually garbled. Not always; sometimes it's intact, sometimes it's completely blank. When it is garbled, it is NOT the garbled text of a wrong baud rate. Rather, it looks like

Deal all, Hi. I'm a new user of isolinux. And I 'm trying to boot a WinXP installation CD with it. I extracted the bootsect, and place it into the same folder together with isolinux.bin. Here's a section of my isolinux.cfg: ... label winxp kernel xpsect.bin ... The boot splash showed fine. Unfortunately when I tried to boot it, I got the following: ISOLINUX 3.11 2005-09-02

Hi all, I know I've done this in the past, but I can't seem to get it working today... I want to roll my own ISO and use custom splash.jpg. If I roll the ISO with the stock splash.jpg, it works. When I save my own 800x600 .jpg as splash.jpg though, I get a black screen. I made sure the permissions and ownership was the same. Is there a special way that the JPG has to be

Hello, This is my first post ever in a mailing-list so I hope I do the things correctly. First, thank's to the author for these amazing tools. With Isolinux, I am making my own DVD multiboot with multiple liveCDs combined. I can get to work everything without even modifying livecds hierarchy. But now I need an important function that I can't get to work: DISPLAY boot.msg In fact to be

I understand the reasoning behind not integrating the dirty gfxboot patch into isolinux and pxelinux, but with many of the major distributions implementing gfxboot, it would be nice for a seamless boot interface across syslinux, isolinux and pxelinux so that the same menu file, look and feel, can be used to boot from the hard drive, USB thumb drive, floppy, or PXE. With isolinux being the primary

Dear sir, We are making a new installation CD for Haydar Linux, Beta1 CD was booting using a lilo on a virtual image and we want to make Beta2 boot using isolinux but we also need a boot splash and don't know if it possible in isolinux. Can you please tell us if it possible, because we have tried using ssl images and it did not succeed and i don't know if the configuration was wrong.

Using versions 3.53 and 3.54, I get that message with the following configuration file (which is under 8192 bytes) on a USB stick; it's the configuration file from PCLinuxOS 2007. It was originally named isolinux.cfg; I changed isolinux.* to syslinux* for booting from USB. There is no blank line at the end of the file. It works well with 3.11, but that version doesn't allow me to put all

Hi, I'm trying to boot Debian-Installer image from extlinux with chain.c32; i.e.: - I'm doing this from a loopback device (loop0) which later will be dumped to an USB stick. - GPT disklabel. - Partition 15 (loop0p15) contains extlinux info, and partition 12 contains Debian multi-arch installer image *dumped*[1], and its corresponding menu entry for extlinux is something like: LABEL

Hi there, I am trying to migrate from using syslinux with the gfxboot patch to using vesamenu.c32 which is a much simpler solution for my needs. The only problem I am having is that when I attempt to use the "splash=silent" kernel parameter it always boots as though I had entered "splash=verbose". By which I mean that the vga mode is correct, and the verbose graphics are

Hi, I am trying to track down a ISOLINUX boot problem on my workhorse computer. Booting slax-6.0.0-rc5.iso from www.slax.org (a live distro) from CD gives the following messages: Loading /boot/vmlinuz ........... Loading /boot/initrd.gz ............ Ready. _ Silence. The next message should be, but does not appear: Uncompressing Linux ........... This message appears with the same CD on an old

I have just created an ISO containing Fedora and ISOLinux as the bootloader. This is the ISO creation command: genisoimage -U -r -v -T -J -joliet-long -V "Fedora-WS-Live-31-1-9" -volset "Fedora-WS-Live-31-1-9" -A "Fedora-WS-Live-31-1-9" -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -eltorito-alt-boot -e

hi! i'm davide from italy and i'm building one live version of Fedora Core3 and, would like to add the verbose bootsplash (for all strartup process) for it i doesn,t understand if is it depending from isolinux, or if i need a patched isolinux version many thanks! -- cosmogonia <http://www.cosmogonia.org/> noprovarenofareononfarenonc'?provare

Hi, Do you have instructions on how to create my own Graphical Splash Screen for use with SysLinux? -- Peace and Long Life, Matt

Hello, I am currently trying to get the gfxboot archive from Ubuntu 12.04 working with gfxboot.c32 under BIOS, using ISOLINUX 6. AFAIK, the Ubuntu patches have been added in 4.03, and in fact it works with the official 4.05 release, but not with 5.10 or 6.01-pre5. I can tell that the menu is actually working, you just don't see it. If you navigate it "blind", the correct

Hi, I am having some problem with LOCALBOOT and menu.c32 This is my isolinux.cfg: ------------------------------------------- default menu.c32 timeout 50 prompt 0 ontimeout local menu title "TITLE" label livecd menu default manu label "LiveCD" kernel gentoo append initrd=initrd.igz root=/dev/ram0 init=/linuxrc looptype=squashfs loop=/ livecd.squashfs

Hello, Im trying to learn syslinux and want to create a multiboot flashdrive, which will have more than one liveCD available for booting. I've installed a simple live cd (secure linux live cd disk#1) to my Fat32 partition. It boots well. Now i want to add another live CD (geexbox disk#2) to boot from the same Fat32 partition. I need to copy some files from live cd (geexbox) and add them