similar to: pxelinux localboot 0 fails?

Ive got a soekris 4801 on which Ive used pxelinux... its bios is set to go to pxeboot 1st, then localboot. Ive got: label bootlocal MENU label ^9 Boot Local localboot 0 # timeout 80 # TOTALTIMEOUT 9000 but using hangs: Booting from local disk... PXE-M0F: Exiting MacPhyter PXE ROM. then nothing. the same compact flash image works fine when boot order is 80 1st, or

Hello, A couple of months back there was this message on the list. http://syslinux.zytor.com/archives/2010-October/015459.html I have exactly the same result on just a few types of machines. Acer Tavelmate 8372 and 5742 InsydeH2O Bios v1.05 Broadcom UNDI PXE 2.1 V 14.0.8 It started after I upgrades pxelinux.0 to version 3.86 Versions tested and got the recursing: 3.86, 3.85, 3.84 and 3.83 On

I just picked up 3.10-pre15 and the "PXELINUX corrupts graphic filename referenced from DISPLAY file" bug is zapped. Yipee! Thanks hpa. And Arwin too, if that 'xor esi,esi' was the crux. However, LOCALBOOT -1 and LOCALBOOT 0 don't work the same as they did for me in 3.07. :-( 3.07: LOCALBOOT -1 apears to work as I have a hard disk listed in bios boot order after the

Hi,, I wud just like to inform that the previous issue of memdisk not booting compressed images still persists !! The release 2.05 that was supposed to fix this issue dint yet solve the problem !! Please, let me know if more info on the problem is required !! Bye, Jassi >From: syslinux-request at zytor.com >Reply-To: syslinux at zytor.com >To: syslinux at zytor.com >Subject:

Hello, Starting version PXELINUX 3.83 2009-10-05, i am not able to boot anymore using "localboot 0" entry. It show "" Booting from local disk... """ Then loop on the network boot of the interface then after a few try show the message: """ It appears your computer has less than 268K of low ("DOS") ... Boot failed: press a key to

Hello. Recently I've ran into problems with HP Proliant booting off the network with menu.c32. Configuration -- several identical servers: HP Proliant DL360 G5 HP Bios P58 12/26/2006 Bootblock 09/18/2006 HP SmartArray E200i Controller (128MB, v1.20) Broadcom NetXtreme II Ethernet Boot Agent v2.8.5 When localboot is chosen from menu.c32 menu I get standard "PXE-M0F Exiting ...",

I have been using PXELINUX, with "LOCALBOOT 0" when wanting to boot from disk, for many years. Now on new Dell Optiplex 990 machines, PXE boot with "LOCALBOOT 0" hangs after message Booting from local disk... without the expected "Exiting PXE" message. I tried "LOCALBOOT -1" and some other values also, none seemed to work. I tested SYSLINUX 4.04.

pxelinux, when given a localboot=... option, will try to boot next bios device itself. The problem is it takes next BIOS device by BIOS order of enumeration. That has no connection with the boot order defined in BIOS. Since a user cannot control BIOS enumeration but can control the boot order, there is no way one can force a desired next device for local boot with pxelinux. In general, you

Hello, I'm trying to boot a HP Proliant DL320 G5 with a HP Smart Array E200i RAID card (latest BIOS and latest RAID card firmware). With menu.c32 or vesamenu.c32 from syslinux 3.50 the system hangs Booting from local disk... PXE-M0F Exiting With the latest dev version (3.52-pre) it hangs with : vesamenu.c32: attempted DOS system call The issue has already been reported but

We want to run multi-drive systems we have in a JBOD mode, where each drive is basically a filesystem to itself. With the drives we currently have, we expect to have multiple failures, primarily unrecoverable ECC read errors or sometimes the drive just dying altogether. How does ext[23] handle these two primary conditions? Using them in a software RAID mode, I have sometimes seen problems with

Hi! A friend of mine has tried a PXE floppy (build from the new etherboot 5.3.12) to load PXELINUX.0; a menu voice of the pxelinux.cfg use the LOCALBOOT statement. Selecting this statement, the PC retry to boot from the floppy... is this normal? The user expected that LOCALBOOT would have tried the NEXT boot device (ie CDROM or HD), not the FIRST boot device (the floppy)... (note: this has

I'm bringing back an old thread, but I'm still having problem with this: http://etherboot.org/pipermail/gpxe/2010-March/000571.html The summary of that thread is that with gpxelinux.0, on some computers the command LOCALBOOT 0 will hang the computer. Around the same time as the original thread, there was a patch to add localboot -1. Also in the original thread, it was proposed to use

I'm having problems with PXELINUX passing through to a "localboot" on a HP Proliant DL385. I'm working with 3.73. If I configure PXELINUX to directly "localboot", everything works. If I configure PXELINUX to use menu.c32 or anything like that, a subsequent localboot fails. I see the expected "PXE ROM exiting" message but the next device doesn't

Just download Syslinux 1.75 and set it up on my SuSE 7.3 box with latest ISC 3.x DHCP release. I am using the SuSE supplied in.tftp, and an IBM PC client with a IBM EtherJet (actually an Intel Pro 100) nic. Everything was actually quite straight forward to setup, and I got PXELinux working without too much trouble. I am booting several different DOS images without problem, and think my Linux

Hello all, I am trying to setup a menu to boot into various windows/linux options and also local boot using pxe. The following is the menu I am using. I tested various options and all worked fine except the localboot. If I choose localboot option the menu leads to pxe of the second nic on the system and then hangs. Anyone has a clue what's happening. Any help would be appreciated

Is there a way to get usage statistics on the journal device? We are testing battery-backed NVRAM cards with extremely busy 1.7TB filesystems (mode data=journal) and we need to figure out what size NVRAM card we need. I assume the journal size depends on how much writing you are doing and we can do simple theoretical calculations (writing 2.5MB/s, 60 seconds of journal would be max 150MB), but

Recently, I decided to pull out a new model laptop for testing related to my job at work. Dell Latitiude E6400, BIOS A14. Normally I have it set to boot CD, USB, Net, then HDD and noticed that with PXELINUX-4.02 and 'LOCALBOOT 0', it hung on me before leaving the PXE stack. I then tried 3.86 and it worked. 4.00 and 4.01 both hung when I tested them as well. Changing to 'LOCALBOOT

Hello, We're using the PXELINUX to boot remote kickstart and Linux rescue images. Recently we got some new hardware (Compaq DL360) which required me to upgrade from PXELINNUX 1.75 to 2.02. Everything works fine on the new hardware, but the "localboot 0" option now just hangs on some of our older boxes. Specifically, our "Tyan Thunder 2510" motherboards with integrated

Hi all, My server is IBM x3850 X5 and use Broadcom UNDI PXE-2.1 v5.2.4 stack. When I choose localboot to boot from the harddisk, the system willnot boot up then still trying to boot from PXE. Several times later the PXE boot procedure is crashed with words as I attached. Does anyone have any good idea? Thanks very much. Eric -------------- next part -------------- A non-text attachment was

Hi LocalBoot have unpredictable behaviour. I have tried 0, 0x80 and -1 on different machines. Some work good, some hang, some reset and some repoen the menu. I also uses chain.c32 but it had the same problem. I checked 3COM MBA menu mba.pxe and it works good on all machines. Is there any workaround? Behrad