similar to: gigabit networks and kernel loads

Im trying to get a diskless boot set up under CentOS 5.2, and having no luck at all. I am to the point of running system-config-netboot, and whatever information I put in, I get an error message. Responding to the 2nd button on the first popup, which asks for NFS info, I put in the IP address of the current machine (the machine that will hold the boot images for the diskless machine) and the

I'm replacing the master node in a cluster and having issues PXE booting the diskless nodes. The current master works fine, but the new node to replace the current node which has the same setup is having the issues. The hardware is: Dell r920 (new master node, UEFI) Dell r620's (diskless, BIOS) Dell 1950's (diskless, BIOS) When trying to boot, the 1950 node displays (though both

I have several machines, same hardware and config, but one tiny little change.. the hostname. Each one of these diskless machines needs its own hostname. Presently my pxelinux.cfg is setup like: prompt 1 default Gentoo timeout 10 label Gentoo kernel boot/kernel-3.16.5-gentoo APPEND root=/dev/nfs rw ip=dhcp nfsroot=192.168.1.10:/RAID/diskless/XXXXX-mythtv-0.27-fixes,tcp,rsize=131072

Hi! We (an astronomical center) are building a small cluster for our number-crunching. The problem is that we have 12 mobos A7V600 by Asus (for athlons) - 1 server + 11 diskless nodes. And here comes the trouble... hardware: mobo: a7v600 net: 1 gigabit by 3com - 3c940, integrated in mobo the problem is: dhcp - works fine tftp - works fine pxelinux.0 - downloads fine (I hope) linux kernel -

Hi folks, I've followed a set of instructions I found on http://www.linuxtopia.org/online_books/centos_linux_guides/centos_enterprise_linux_sysadmin_guide/ch-diskless.htmli which describes using system-config-netboot to set up PXE booting. I used a CentOS-4.3 install (custom, all options de-selected, then anaconda-busybox installed after the fact) as a reference/base. I followed the

Does anyone have any good how-to's or documentation on setting up read only root NFS for pxe booting diskless computers? A few months ago I stumbled upon an official Redhat doc through a google search(not hosted by redhat and I cannot find it anywhere on the Redhat site) written by Dave Kline named "Configuring diskless clients with Red Hat Enterprise Linux" from 2011. It seemed to

I'm trying to boot RedHat 9.0 on a diskless PC from a head machine running Redhat 9.0. The network appears to be setup correctly. I can boot the installation disk image fine using pxelinux. What I am trying to setup is a number of different Linux systems each with its own root directory on the head machine. I am hoping that I don't have to modify the kernel for any of these systems.

currently i'm trying to setup diskless client, which netboots 6.1-PRERELEASE kernel with help of etherboot. i've built custom kernel with `sudo make -j4 buildkernel KERNCONF=DISKLESS CPUTYPE=pentium-mmx -DNO_MODULES' and attached config. kernell loads off tftp server fine, detecting devices, but traps, when trying to mount root fs from nfs server. i've managed to get copy of

Hi, I am working on the diskless booting over Infiniband networks. At the moment we have created and implemented architecture which allow diskless booting of Linux nodes on x86, x86_64 and Itanium platforms. The system works by booting first small custom made Linux kernel of the Infiniband adapter ROM. The kernel has enough of infiniband stack to setup TCP/IP networking over infiniband. Then it

The following manifest is causing an error/warning and permissions are not set. i do not understanding why: file { "/diskless/swaps": ensure => directory, owner => nfsnobody, group => nfsnobody, mode => 1777; } The error is: Fri Sep 21 14:53:05 EST 2007

Hi all I''m fighting right now with the functionality of overriding variables. I''ve made a base node with some variables: node base { $country = "dk" $dv = "sarge" } And I''d like to override some of them in subnode definitions: node server01 inherits base { $dv = "etch" } Is this possible, or do I have to wrap the variables in a

Hi We like to build Diskless clusters. Where should we go to know how to build Diskless X server running in Centos6.2? Y.Nishimura

Hey everyone -- Is there a way to refer to the server with the tftpboot images so that when a client is booting diskless, it can mount an nfs directory to that tftp server? That is to say that I have a tftp server on 192.168.0.244. The usr directory is set to be shared amoung the diskless clients via nfs. In the root image, I have /etc/fstab set to something like: blah blah

Because everything I searched on for a PXELinux mailing list pointed me to here. And because PXELinux is a derivative of SYSLinux. If there is a better mailing list for my questions, please let me know. Since you say its possible, care to enlighten me on how to do so? Marc From: Don Cupp [mailto:doncuppjr at yahoo.com] Sent: Tuesday, August 25, 2015 10:58 AM To: Marc Tousignant

> /diskless/pxelinux.cfg/default > --- > DEFAULT /gentoo-x86_64/boot/kernel-3.14.14-gentoo > APPEND ip=dhcp ro rootfstype=nfs root=/dev/nfs > nfsroot=10.0.0.11:/diskless/gentoo-x86_64 > init=/linuxrc That pxelinux.cfg/default seems "tolerable" for older versions, but not for Syslinux 5+. Is this an inadequate copy of the actual content? Or is it really a

Hello all Now I may be way of whack here, so please forgive me. I''m trying to merge xen with redhat''s config-netboot. The idea being a kinda stateless domU. For those that haven''t seen you share a rootfs and then bind mount all the individual files over then top, and the redhat gui builds all the pxeboot config and stuff for you if you want a diskless client. I

Hello all, I have observed a problem with a diskless PXE client I am attempting to configure. PXE/NFS/DHCP/TFTPd server is running CentOS5.1 and the Diskless workstation's root and kernel was extracted from a CentOS5.1 (custom kernel due to setting to enable Root File System support). Problem: When the diskless client boots and logs in I notice that my root user is being squashed, even if I

How to configure Diskless environment in CentOS 5.1. Please help me out Regards, Gopinath M Signal Networks Pvt. Ltd. Smile... it increases your face value! -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20080410/bf9d216c/attachment-0001.html>

Hello all, I have a customer that insists of using upstream vendor's diskless (system-config-netboot) rather than LTSP. The reason is that he wants to use a 100% packages from the vendor, not from LTSP or any other party. I try the vendor's diskless system, and although it's very simple to setup, it lacks the support and/or documentation whereas LTSP is very good in it. Another

Twice now over the past year, I've had something edit the /etc/X11/xorg.conf file without user intervention. The machine in question is a 3 headed X-Terminal that displays the accelerator control system application for a medical proton accelerator, and operated by staff who do NOT have root or root like access (sudo) on the X-Term, as once it's configured, it should never need changing.