similar to: pxe & 3c920

Hello, I've attached the output from "sh scripts/ver_linux" per the bug reporting guidelines, and a diff of the file fs/jbd/transaction.c. At this point, I'm trying to hunt down why some system threads, which are executing the Lustre file system code, are taking an unexpectedly long time executing various ext3 file system functions. I added some debug code to these system

Hi.. Well i've tried each and every method to insert any winme command.com into any bootable image and its really giving me problems.... I even further tested the same image with reinserting the 98 command.com and the image worked just fine.. So acc to me the problem has to lie in me command.com as there is no real mode dos in ME.. Also try using umbpci.sys and lowdma.sys for managing

Hi, I have the pre4-Version installed since today morning, and it's working fine so far. I have some quetion about it: How can I create a boot-Picture for the PXE-Stuff with Wi****s-Tools for example Paintshop Pro 5.03 ?? I already tried to load one of the Examples and saving the modified Pic back but it didn't work. I would love to have a blue background with white letters and red

Hi, I've got the same Problem. Not with WinMe but Win 98SE. But what I figured out is, that it doesn't realy apply to the Command.com rather to the Way the BootImage was created. It took me a long time to get my Hands on a Image with 2.8MB that's working. Since creating one my self, was allways failling. I downloaded the Bootutils 4.3 from 3com and used the Imageedit tools. With these

I can ping the virtual Linux servers NetBIOS name and access a share. Perhaps someone can examine the attached named.conf file for errors and/or omissions. My virtual Linux server (172.17.60.6) has been configured as a WINS server, and a PDC. I am not, however, certain how to configure it as a DNS server beyond what is in the attached named.conf file. Here are the results of pinging the

Hi, I have a dual-ported raid controller which allows two computers to connect to the same ext3 filesystem. I never mount both systems read-write at the same time. What I would like to do is use one normally, and mount the second system read-only to perform backups and to rsync the filesystem to another filesystem. When it's mounted read-write from another system, will mounting the same

Hello All, I seem to be having a problem with PXE under the 3com MBA once the pxe loads the standard redhat 7.2 lilo prompt and I type my label which is a4-72 and hit enter, I get: Loading vmlinuz... and it stops most of the time. Sometimes it loads and once it gets to the part of installing linux the screen turns red and I get "interrupt handler not syncing" Thanks -- Otis DeWitt -

I have DHCP and TFTP on a Solaris machine, pxelinux.0 loads, but it can't load the configuration file. The tftp server on Solaris tries to send the file, but data transfers do not receive ACKs. Previous posts to this list have indicated that the suspect was the PXE BIOS (ref "PXELinux can't load the config file?" dated March 20, 2003). Does that still appear to be the case

I have a data frame with a couple million lines and want to retrieve the largest and second largest values in each row, along with the label of the column these values are in. For example row 1 strongest=-11072 secondstrongest=-11707 strongestantenna=value120 secondstrongantenna=value60 Below is the code I am using and a truncated data.frame. Retrieving the largest value was easy, but I have

Hi, we want our PC's to boot from network; therfore we use the following setup on a linux 2.4.19: dchp: (ISC DHCPD 3.0.1rc9) ... option bootfile-name "boot.ovl"; option tftp-server-name "saxophon.intern.ebewe.at"; ... tftp: (tftp-0.34) ... tftp dgram udp wait root /usr/sbin/in.tftpd in.tftpd -s /tftpboot -c in

Hello I have some problems with 3Com nics, after a upgrade from 5.5-STABLE to 6.4-STABLE. This machine has two 3com nics (one is LAN other is WAN) and i see too much "watchdog timeout" on both cards. This on/off up/down on cards, affect the interrupt to clients that are downloading from apache web server, especially on large files. --------------------------------------------

I am trying to use PXELINUX to quickly build a RedHat 7.3/Red Hat 8.0 network via TFTP, NFS, and Kickstart . I had this working previously with an older version of PXELINUX, but as I am trying to build a new network segment, I needed to set this up again. I have the files set up as specified, where my default file looks like: default linux label linux kernel vmlinuz append

Hello, I use HTB with linux-2.4.20-ac1 and iptables-1.2.7a (pathced for IMQ). I configured one HTB qdisc on an IMQ device. This qdisc has some classes (about 5) and all of the classes has qdisc pfifo. I sometimes got out from my linux (while I was working) and I found in logs: Dec 4 11:49:27 core kernel: HTB init, kernel part version 3.7 Dec 4 11:49:28 core kernel: HTB: quantum of class

Op 20-09-2007 om 08:31 schreef St?phane ARQUER: > "previous" > > [ 'elf.c32' booting a RTEMS ELF binary ] > > - P4 2GHz 512M with a 3c905c PXE v2.20 > PXELINUX doesn't work with this one > > - P4 3GHz 2048M with an Intel 82573L gigabit eth PXE > PXELINUX works on this machine > > - HP kayak P3 866MHz with PXE v2.20 > PXELINUX doesn't

PC: HP Vetra VL400 Mainbood: Intel815 BIOS: Phonix 4.0 release 6.0 OS: REDHAT 9.0 I installed the X100P in PCI slot 2 and disable the USB port, serial-port and parallel-port in BIOS. I can't found the X100P card in " cat interrupts" But I can found the card in the "cat ioports" use "lspci" I found the X100Pcard use the interrupts 11 too. Who can help me to solve

> Use an Intel pro/100 or pro/1000 driver..they are known to > work with VLANs. > > I guess it's also possible that it's a problem in the > bridging code, so try the latest kernel > as well... I compiled the latest 2.6.19 kernel and tested it with two 3COM 3c905c fast ethernet interfaces which work fine with vlan 802.1q tagging, but when I have added the eth0 and eth1

Hi [1.] One line summary of the problem: rsync segfaulting and the kernel oops'ing while synchronizing two smbfs's [2.] Full description of the problem/report: I am implementing file synchronization between two Windows NT 4 machines through two smbfs mounts. Rsync runs for about half an hour; then the kernel gives an oops and rsync segfaults. Hereafter the smbfs file system is

Referring to my previous post about degradation of voice quality when having more than 2 connection. The actual route is: pc xlite -> local asterisk box -> iaxtel -> local asterisk I have tried out a different situation: pc xlite -> local asterisk box -> iaxtel and the second connection pc xlite -> local asterisk box -> iaxtel -> local asterisk The same degradation

Howdy: This is (at least slightly) off-topic, but I've seen more knowledgeable folks than I mention autonegotiation in this venue and, since I didn't get any response on the vortex-bugs mailing list, I thought I'd ask here (also, the interface in question supports samba so...). And there should be some good news for some folks too. If this is old news, sorry (I've been too busy

My system is: Intel CC820 motherboard (which supports PME# wake up for wake on LAN) 3com 3C905C which also supports wake on LAN via PME# Linux 5.5 The motherboard BIOS is later than one that reports an issue with WOL and this particular network card was fixed. But when I turn off the PC (shutdown or poweroff commands or front panel button), it cannot be restarted via WOL. The network light on