similar to: pxelinux and SMP kernel strangeness...

I need a timing device for the DL360G2 for conferencing and meetme. For a timing device I have 2 X100P cards but neither will work in my DL360G2. The system will not even boot with either card in the system. Other PCI cards seems to work fine. I called Digium support and was told that there must be a conflict between the card and my Compaq DL360G2. I then moved on to ztdummy. I'm sure the

Kristian, I have 2 X100P cards but neither work on my Compaq DL360 G2. The system will not even boot! Take a look at my initial post and let me know if you have any other advice. Regardless, thanks for your post! ------------------------------------------------------------------------ - I need a timing device for the DL360G2 for conferencing and meetme. For a timing device I have 2 X100P cards

Does anyone know where to disable rtc support on redhat 9.0 using make menuconfig? I thought I disabled it but still got the following error when trying to make zaprtc: zaprtc.c:109: storage size of `rtc_irq_timer' isn't known zaprtc.c:719: storage size of `rtc_fops' isn't known zaprtc.c:107: warning: `DECLARE_WAIT_QUEUE_HEAD' declared `static' but never defined make: ***

Hello, We're using the PXELINUX to boot remote kickstart and Linux rescue images. Recently we got some new hardware (Compaq DL360) which required me to upgrade from PXELINNUX 1.75 to 2.02. Everything works fine on the new hardware, but the "localboot 0" option now just hangs on some of our older boxes. Specifically, our "Tyan Thunder 2510" motherboards with integrated

On a Compaq DL360 G1 w/ dual PIII 1.27's I installed Centos 5 minimal and then a yum update When I do a "uname -a" I get this Linux tstsrvr.abbacomm.net 2.6.18-8.1.3.el5 #1 SMP Mon Apr 30 19:55:44 EDT 2007 i686 i686 i386 GNU/Linux When I do a rpm -qa | grep kern* I get this kernel-devel-2.6.18-8.1.3.el5 kernel-2.6.18-8.1.3.el5 kernel-headers-2.6.18-8.1.3.el5 It is interesting

Any help would be appreciated as I am a novice trying to work around a difficult situation. This is what the zaprtc helpfile says: zaprtc, getting zaptel timing out of your realtime clock ======================================================== Make sure that you _dont_ have rtc support compiled into your kernel! INSTALL: make USE: make load REMOVE: make unload I interpreted this as

Hello, I have been wrestling with installing the CAPI drivers for AVM Fritz in order to use chan_capi with Asterisk. I use an SMP machine, RH 9. I have found rpm's for CAPI and AVM drivers (namely: capi4k-utils-2003.06.16-08.mungo.RH9.i686.rpm and kernel-2.4.20-8- avmfcpci-03.11.02-08.mungo.RH9.i686.rpm), but I believe that they support only single processor machines. I've already

Hello * this morning I tried to upgrade from pxelinux 3.11 to 3.84 and discovered that the localboot stuff does not work on HP DL360 G3 and G5. The latest syslinux Version I found with a working localboot is 3.36. pxelinux.cfg/default: default harddisk prompt 1 label harddisk localboot 0 implicit 0 timeout 250 This so simple, it should just work, shouldn't it? The

i'm running on vmware system and HP proliant DL360 G5 servers on wmware, on boot i have the following message: ----------------------------- Applying Intel Microcode update: don't know to make device "cpu/microcode" [OK] ----------------------------- and on a HP proliant DL360 G5 server , on boot i have too the following message: ----------------------------- Applying

Hi. I'm looking at a qlogic qle2462 hba for my dl360 g5. The thread http://www.mail-archive.com/freebsd-stable@freebsd.org/msg99497.html mentions a deadlock when system is loaded. Has this issue been resolved? Are there other PCI Express hba's which are known to work with freebsd stable and dl360 g5? -- regards Claus When lenity and cruelty play for a kingdom, the gentler gamester is

Hi all, Does anyone know how to determine which file system a disk was formatted with, if fdisk -l doesn't show it? usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning Vendor: Model: Rev: Type: Direct-Access ANSI SCSI revision: 02 sd 7:0:0:0: Attached scsi disk sda sd 7:0:0:0: Attached scsi generic

I have been trying to install CentOS 4.3 on an HP DL360 G3 (with dual Xeon 3.2 GHz, a Smart Array 5i, and two 36 GB disks doing RAID 1 mirroring). I''m doing all defaults (including the disk and LVM setup) and using the "Minimal" checkbox at the bottom of the Custom machine type package selection screen, so it''s a very "vanilla" install. It zips through the

Guys, I'll be building a couple of DL360 G4p & DL380 G4 boxes soon and I've not dealt extensively (i.e. at all) with any PC stuff that hasn't been i386. I know the DL line pretty well but it was all G2/3. So, question is, do I stick CentOS i386 or x86_64 on them? 2 boxes x 2GB RAM and 1 x 4GB, all SMP. Will.

I have purchased a used Compaq DL360 which I was going to use as a proxy server. Presently, we are using a cheap box with ipcop which is working fine but it didn't have much RAM (64MB), etc. This new box we will want to run squid and perhaps dansguardian for filtering (this is a non-profit company) and I'm wondering if I should just put ipcop on it or would it be smarter/better to install

I try to run lli with "--load=/lib/libpthread.so", but it shows: --------------------------------------------------- [yue at RH9 test]$ ./pthread.ll Error opening '/lib/libpthread.so.0': /lib/libpthread.so.0: symbol _errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference -load request ignored. Creating thread 0 WARNING: Cannot resolve fn

hi, I compile a pthread program using llvmgcc, but when i run pthread.ll, it show: ------------------ [yue at RH9 test]$ llvmgcc pthread.c -o pthread.ll [yue at RH9 test]$ ls pthread pthread.c pthread.ll pthread.ll.bc [yue at RH9 test]$ ./pthread.ll Creating thread 0 WARNING: Cannot resolve fn 'pthread_create' using a dummy noop function instead! ERROR; return code from

On Wed, 24 Dec 2003, yue wrote: > I try to run lli with "--load=/lib/libpthread.so", but it shows: > --------------------------------------------------- > [yue at RH9 test]$ ./pthread.ll > Error opening '/lib/libpthread.so.0': /lib/libpthread.so.0: symbol > _errno, version GLIBC_2.0 not defined in file libc.so.6 with link time > reference > -load request

Hi, First, I want to precise that I'm new to linux, so please answear with simple words ;) My problem is that I have to install and configure linux (RH9) on 36 identical computers. This would take ages. What I want to do, is to configure one, and then clone the install. But thos computers have no CD, no floppy, and I didn't manage to boot them brom an usb stick. The last option is to

Hello All, Has anyone tried using a HP DL360 G5 with the Advanced iSCSI license? Cheers Tim _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

The machine in question is a DL360 G3 R03 Xeon DP 3060-512/533 (part number: 322471-421). It's the first HP-branded model we've had so far (previously all Compaq branded). It has 1Gb of memory and a couple of drives on the on-board SCSI controller (setup for mirroring in the SCSI bios). No SMP is setup right now (doesn't get far enough to do anything with it!). In any case, this