similar to: ISOLinux problem--Multiple CD-ROM's

Peter, Okay, here are the exact error messages and what leads up to them: -------------------------begin------------------------- Adaptec AHA-2940 Ultra/Ultra w BIOS v.1.23 (c) 1996 adaptec, Inc. all rights Reserved. Press <Ctrl> <A> for SCSI Select (TM) Utility! * SCSI ID: LUN NUMBER #:# 0:0 - IBM-PCCO DGHS - Drive C: (80h) SCSI ID: LUN NUMBER #:# 5:0 - MATSHITA CD_ROM CR-506

Hello, does CentOs 5 supports an Adaptec AHA-2940W/2940UW scsi controller (pci)? Is this controller maybe supported by the aic7xxx driver? I want to install CentOS 5 on my desktop pc but the currently installed pci scsi controller for my scanners (drivers: 2x tmscsim, 1x advansys) are not supported by CentOS. So I am searching for something else. Thanks in advanced. regards Olaf

isolinux: Extremely broken BIOS detected Yoper 2.1 --------- ISOLINUX 2.11 2004-08-16 isolinux: Loading spec packet failed, trying to wing it... isolinux: Extremely broken BIOS detected, last ditch attempt with drive = 9F isolinux: Disk error 01, AX = 4209, drive 9F Boot failed: press a key to retry... Helix 1.5 --------- ISOLINUX 2.04 (Debian, 2003-06-06) isolinux: Loading spec packet failed,

I am trying to install Debian Linux on an an old Intel Classic R+ computer that uses an internal Yamaha SCSI CD writer model CRW8424S connected to an Adaptec ISA SCSI card (I think its a 1542CP). The CD writer is is the only device connected to the SCSI card. The computer has one hard drive connected to the on-board IDE interface, a 1.44MB 3 1/2 inch floppy and a 1.2MB 5 1/4 inch floppy. The hard

H. Peter, I came across the first system where isolinux failed to load: ======================================================= Isolinux 1.63 2001-8-6 Copyright ... isolinux: Starting up, DL = F0 isolinux: Loaded spec packet OK, drive = F0 isolinux: Sector size appears to be 0800 isolinux: Loading main image from LBA, 0003F25D isolinux: Sectors to load = 0004

Hello List, I have a problem with an Onborad scsci, that won't boot a isolinux-cd: anyone got a clue? Mainboard is ASUS-CUV4X-DLS with onboard LSI 35c1010-33 Controller. Board-Bios is Award Medaillion 6.0 and Controller Bios is Symbios SDMS v4.0 (4.18.02) The CDRW device to boot from is a Yamaha CRW2100S Rev1.0H I tried Isolinux 1.63 and 1.66 with similar "success": here's

Greetings from beautiful Alabama. You have requested for people to let you know if they are having any problem: I am a professor in the Department of Mathematics, Auburn University. Among other activities, I do a lot of Linux installations on older computers, many of which are old Gateway Pentium Pro boxes which came with Adaptec 2940 SCSI cards and SCSI CD. I have burned several Slackware 8.1

-----BEGIN PGP SIGNED MESSAGE----- The autodetection routines for some linux modules can tie up the machine for several seconds at a time. By trying to open devices not present on the machine, a local user can disrupt service considerably. A very simple exploit is victim$ ls /dev/*/* repeatedly. A suggested fix is to remove or chmod 0 device nodes for hardware not installed on the

Deal all, Hi. I'm a new user of isolinux. And I 'm trying to boot a WinXP installation CD with it. I extracted the bootsect, and place it into the same folder together with isolinux.bin. Here's a section of my isolinux.cfg: ... label winxp kernel xpsect.bin ... The boot splash showed fine. Unfortunately when I tried to boot it, I got the following: ISOLINUX 3.11 2005-09-02

Hi, This is off topic for this list, but someone on this list may be able to point me in the right direction. For a couple of years I have been using ISOLINUX + MEMDISK and Smart Boot Manager to chainload a CD-ROM boot after loading a floppy image into RAM with MEMDISK. My problem now is that Smart Boot Manager does not support/detect SATA optical drives used in new hardware. Does anyonw

Peter, Thank you for isolinux. What a relief to be rid of floppy images! ISOLINUX works great except in one puzzling instance. I recently upgraded my system with a Promise Ultra 133 (PDC20269) controller. In order to boot from either the hard drive or CDROM drive connected to this controller I set the boot device in the motherboard BIOS to SCSI. Everything seemingly works great. Until we get

Hi all, I am at the end of my wits, after a day and a half of mucking around with this :) My intention was to take a multi-boot DVD - of the style you get with an MSDN subscription - and burn an individual installer to disc. How to do this? My theory was to take the files for the installation CD, add isolinux, add a bootsector, and away I go. Unfortunately it doesn't seem this easy. So I

I've created a bootable cd with isolinux but it can't load the kernel. It detects everything fine, decompresses the initrd, loads and decompresses the kernel and then tries to boot the kernel. But after that the computer hangs. Here's the screen dump: ISOLINUX 1.73 2002-05-26 Copyright (C) 1994-2002 H. Peter Anvin isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK,

Hello. First I want to say that I am not looking for you to solve this particular problem...only looking for information or links to information. Here is the problem: On several machines when trying to run RedHat's latest 8.0 software, I cannot get the CD-rom to boot on machines that would normally boot. I get an error that contains: "loading spec packet failed" and

Peter, First, I'm not a programmer and I don't have Linux. The reason I am emailing you is that I spend the two weeks looking over your site and other trying to figure out " HOW to create an ISOLinux image or convert my existing ISO image to and ISOLinux image. I have some software called" Flashboot" that can take and ISOLinux image and can create a bootable Flash drive of

chain.c32 of SYSLINUX 3.82 does set the boot drive passed to the DL register to 0x80 and not to the boot drive (CD-drive). This can be a problem if you want to chainload grldr (grub4dos bootloader) from a CD and if you want to let grldr search for its menu.lst file on the CD. For more info: http://www.boot-land.net/forums/index.php?showtopic=8457 This 1 line patch fixes the issue (Thanks to

We are migrating from Fermi Labs linux distro to the Centos 3.6 distro. So far all of the Dell's we have installed on have worked fine but we have two generic servers that are using Tyan Thunder K7X motherboards with built in Adaptec Ultra 160 SCSI using AIC7899 chipset. When we try to install on these systems the install cd seems to lockup loading the AIC7xxx driver. Adaptec says they do not

Holger Wansing <linux at wansing-online.de> writes: > I found, that this not only a problem of the netinst cd, but > also hardware dependent. > I can boot my old 486 Toshiba Satellite laptop with this cd, > but on my IBM Thinkpad T23 the cd produces the isolinux error: > > Error: no configuration file found. > > (The T23 does not contain the original optical drive, I

I'm not exactly sure what you need. Is this it? ISOLINUX 4.06 0x513e88f5 isolinux: Starting up, DL = 82 isolinux: Loaded spec packet OK, drive = 82 isolinux: Main image LBA = 0000011D isolinux: Main image read, jumping to main code... I created an iso with isolinux-debug.bin as the boot loader and booted it on that machine. If this is not what you are looking for, what are correct steps?

I've spent the past four days or so updating machines here to 4.8/9-stable via cvsup, and have done a complete make buildworld/kernel on each machine (some SMP, some single processor). It seems something is broken with the latest fxp driver, on each machine (different mobos and hardware configs) heavy network traffic with fxp NICs causes timeouts and random kernel panics. First machine to