similar to: DVD RAM drive and CentOS 4

I'm not subscribed to this list; but I read that Matthew Dillon has ported the dvd+rw tools to FreeBSD. I just compiled and installed the application; but I can't burn to a DVD+RW on a Sony DRU-500A. command: growisofs -Z /dev/acd0c -rl ./testfile result: ":-( unable to CAMGETPASSTHRU for /dev/acd0c: Inappropriate ioctl for device" The DVD+RW website:

I am new to Wine and really struggling. I'm trying to get DVD Shrink and DVD Decrypter running on my Kubuntu 5.04. My system is current. I have a 2.8Mhz machine with 1Gb memory and lots of space on my 160Gb hard drive. I have a Plextor DVD+-RW and an HP CD-RW. They are /dev/hdc and /dev/hdd respectively. Here is my /fstab file: # /etc/fstab: static file system information. # # <file

On the system I'm testing with the CD-Rom drive is IDE but the softlink at /dev/cdrom points to the scsi device and that's not working with the automounter for some reason. Each time I reinstall I have to delete the soft link and recreate it pointing at /dev/hda instead. > -----Original Message----- > From: centos-bounces at centos.org > [mailto:centos-bounces at centos.org]

Just a thought If the I386 (or i686, never could figure out why the name change) disk doesn't quite fit on the DVD+, and needs a DVD-, this might put some folks at an inconvenience. I wonder if the difference between fitting and not fitting is small enough, so that some amount of pruning might make it fit on the DVD+R image. Some ways to prune could be: a) Create two versions of the

Hi: I could not figure out how to restrict users or other users from certain privileges to execute certain commands in FreeBSD/NanoBSD? What I meant is I want to create a NanoBSD image in which there will be an additional user, say 'admin'. I need to give this new user (admin) some privileges to run some root-can-only-execute commands, but not all (ACL similar to the firmwares in adsl

Earlier this evening, I had the interesting experience of shutting down my machine (because of that lp out-of-sync problem, discussed elsewhere), and watching it not come back up. I admit that I changed out one of my DVD writers for another one, but I don't understand how that could have had any effect on this: When I restarted the machine, it came up to the point where it normally shows:

Hi, I''m having some trouble overriding/defining the default_field_options constant without raising a warning. I''ve tried adding the code to do it in an initializer but that produces a warning (because the constant is already frozen), after some googling I found a recommendation to put it in the environment.rb file but that then that throws uninitialized constant ActionView

Hi, there, I tried to install Centos 5.1 on a Dell Inspiron 530 box I just bought, but failed due to invalid drive. The installation did not recognize either the DVD nor the hard disk. Joseph from the community said it is likely that Centos can't recognize the controller -- Intel SATA controller (cmiiw). Did anyone solve this problem before? How did you do it? Here's the related

Hi, so I just bought a NEC 1300A, primarily, because it allows me to write DVD+ and -RW. Using DVD-R discs (and currently no options to try other media, due to shops being closed), I'm unable to write anything, using either the dvd+rwtools port, or the dvdrtools. I've exhausted all references to be found in google, which are in a language I understand, so I'm hoping the list can

Morning All, I upgraded from 9.2-STABLE to 10.0-PRERELEASE #0 r259144 last night and I am now getting this every 2 seconds in /var/log/messages: Dec 10 07:54:31 Shop kernel: ata1: FAILURE - zero length DMA transfer attempted Dec 10 07:54:31 Shop kernel: ata1: setting up DMA failed cat /var/log/messages | grep ata1: cd0 at ata1 bus 0 scbus3 target 0 lun 0 cd0: <TSSTcorp DVD-ROM TS-H352C

I'm trying to use DVD-RW ("minus RW") disks in my LG GSA-4040B drive. I can write a new disk just fine, but can't find any way to blank or re-use a disk. When I run xcdroast and click on the "Blank CD/DVD+-RW" button, I get "Error while blanking." Here is last part of the dialog: Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd) Driver flags

I just got a Dell Dimension e521 (AMD 64 x2, nVidia MCP51 chipset) and so far it has been fine. Today I tried to burn some CD-R and DVD-R disks and have been able to do nothing but make coasters. The drive is a TSST TS-H653a (Samsung OEM) and does have the current firmware. Playing back data, audio, and video disks work just fine, but recording is a different matter. The drive shows up as

Hi there. I am unsuccessfully trying to write a data DVD on FreeBSD 4.8. The writer is a Sony DVD RW DRU-500A on IDE. I'm using the atapicam driver. The media is a Sony DVD+RW which arrived with the writer. Both with cdrecord ProDVD (from the ports or otherwise) and dvdrtools I get a general SCSI retryable error message, when trying to write a data track or blank a DVD. I have no

Hey guys, Thanks a lot for the CentOS 6 distro. I am having trouble burning the i386 dvds. I tried on a RHEL 6 deskop and also a CentOS 5 laptop. The command I am running on both systems is this: growisofs -dvd-compat -speed=4 -Z /dev/sr0=/home/gsgatlin/CentOS-6.0-i386-bin-DVD/CentOS-6.0-i386-bin-DVD.iso The error I am seeing is: :-( /dev/sr0: 2295104 blocks are free, 2297586 to be written!

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> <title></title> </head> <body bgcolor="#ffffff" text="#000000"> Hi everyone<br> <br> I was wondering if I could fit in my backup server

Hi Everyone, I downloaded the CentOS 6 x86_64 DVD ISOs and burned the first image to a rewritable DVD. When I tried to boot my new home server off it, it didn't, and then this was printed to the screen: ETCDisolinux: Found something at drive = EF No DEFAULT or UI configuration directive found! boot: The same disc works fine in my 4 year old HP laptop, and when installing CentOS 6 as a KVM.

Hi, I'm having an issue with my Thinkpad P70 laptop/workstation. This system is a dual boot, windows 10 pro and centos 7. I have not needed to use the cdrom until now, however the system does not see it in /dev. I know the cdrom works as I can use it in windows 10 and when initially installing centos 7, I installed from dvd media. I'm not sure what to check. I do not see anything related

I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW drive attached to an Asus A8V-MX motherboard. When I try to use burncd to burn a cd, it writes all of the data, says "fixating CD, please wait.." and then reports burncd: ioctl(CDRIOCFIXATE): Input/output error Oddly enough, the CD seems to be usable. I can successfully burn the same file if I use cdrecord. The

functionaly infogcontroller klimkosky n2 kiop inducasti I finally found that site you were asking me about. We carry all the popular hard to fi*nd dr`ugs. We have Bra/nd name AND gen#eric dru*gs! Tvsbqba http://xt.net.yourstuffsource.com?r=T12k62 Why not Visit Us and save on all you presc<ription drugs today. and don't forget, we ship within 24hrs. Of course; when it is four

The newest issue of BSD Magazine is already available for free on our website BSDmag.org! http://bsdmag.org/magazine/1049-hosting-bsd a.. Modern FreeBSD Install All these years sysinstall(8) was helping us to install FreeBSD with most needed options. Slawomir Wojtczak (vermaden) a.. X11 without dbus/hald and with three kings FreeBSD Handbook suggests (check section 5.4.2 Configuring X11),