similar to: Help: Virtual Network of Domu's

After googling around and reading the material on the opensolaris.org xvm community site, I still do not understanding the configuration of networking and would appreciate some assistance. Problem: I have successfully installed an hvm domU running Windows XP on opensolaris 2005.11 (build 94), and when the laptop (lenovo t61, core2 9300) is connected via the e1000g0 interface networking works

redirecting to crossbow-discuss... On 03/12/09 15:17, Andrew Gabriel wrote: > In snv_108, I''m playing with creating a vnic over an etherstub, and I > might not be doing it right, but the behaviour I''m seeing doesn''t look > right either. > > So this is what I did... > > # dladm create-etherstub estub0 > # dladm create-vnic -l estub0 vnic0 > #

Hi All, I have bfu''ed to net-virt_xb-21_snv_81_021308. The dladm command on my machine does not have create-etherstub option. Please let me know what could be the issue. Thanks Khushal

On OpenSolaris 2009.06 I created a flow, half a dozen VNICs, and I set some properties, and everything was working, then I rebooted my system and everything disappeared from show-vnic, show-flow, and show-prop. When I tried to re-create the objects, dladm said they already existed. While I could not see the objects, I could delete them. Example: # dladm show-vnic # dladm create-vnic -l bge0

Using OpenSolaris 2008.11 build 110. Created vnic''s and etherstub''s and they are displayed using dladm show-links but when the server is rebooted a ''dladm show-link'' is empty although the vnic and etherstub devices are still there and function properly. That is a real inconvenience, so why do the no longer show after a reboot or shutdown/start? Is there a

Hi, Is there any way to add VNIC to the domU? # virsh attach-interface mydomU network myvnic1 # libvir: XML error : missing source information for device myvnic1 It''s SXCE105. -- Regards, Piotr Jasiukajtis | estibi | SCA OS0072 http://estseg.blogspot.com

Hi, I am trying to install CentOS on an Opensolaris Dom0. virt-install fails with an error in virDomainCreateLinux(). Is this a known issue? Am I missing some step? manoj@mowgli:~$ uname -a SunOS mowgli 5.11 snv_101b i86pc i386 i86xpv Solaris manoj@mowgli:~$ pfexec virt-install What is the name of your virtual machine? centos How much RAM should be allocated (in megabytes)? 512 What would

I have installed on a VirtualBox vm the crossbow ISO Now I''m trying to create the network map described in the "getting started" pdf I have this situation: On global zone, I have the real NIC: e1000g0 with ip 10.0.2.15 (VirtualBox NAT this IP, I can get web access with it) I have created an etherstub (etherstub n?2) with 2 vnics (vnic5 and vnic6), I''ve plumbed

Folks, I''m playing with maxbw on links (as opposed to flows) in Crossbow, and I have a couple of questions. First, the limts seem only advisory. The first example has the main host talking to a zone that has 172.16.17.100 configured on znic0. When there is no maxbw, the throughtput is as expected; when maxbw is 55M the throughput only drops to 76 Mbps: # netperf -H

How do I create a vnic that represents the factory assigned MAC address of my physical nic? The bge device in my system (x2100) appears to support 4 MAC addresses. The driver reserves the first as the ''primary/default'' address and allows manipulation of the other three via the MAC_CAPAB_MULTIADDRESS interface. I''d like to use vnics on this system, as I have Xen guest

Hi, I''m afraid I have some problems understanding how crossbow is supposed to work ;) On my machine (OpenSolaris, snv_111) I''m running VirtualBox with couple of linux / XP installation and additionally a zone with exclusive IP. My network configuration looks like this: [6]elsinore:~>dladm show-link LINK CLASS MTU STATE OVER bge0 phys 1500 up

Hi Folks, I have a snv_105 sxce host that I just can''t get to work as expected with crossbow + zones. My test host persephone, is a virtual machine running under VMware ESXi 3.5, with 2 virtual network cards (e1000), all on the same flat network/subnet. It started life just 2 days ago with a clean install of snv_95, and I LUed to 105 yesterday. To rule out any sharing issue, the first

Hi the Crossbow team, I am testing my UV fastpath bits and I found several issues that need your suggestion: 1. dladm show-usage won''t work if UV fastpath is enabled. Since the link usage data are collected based on the statistics of the mac_client_impl_t, and UV fastpath skips the GLDv3 processing, that won''t be available. I don''t see a solution for this except

Folks, I just posted an updated Crossbow virtualization architecture document. The new revision is available at: http://opensolaris.org/os/project/crossbow/Docs/crossbow-virt.pdf The main changes are the addition of support for multiple MAC addresses per client, and an explicit separation between consolidation private and project private MAC API entry points. See in particular the

I decided to take a stab at 6601421 dladm set-linkprop should support multiple -p options along with some related linkprop fixes, but when I looked into dladm.c, was surprised to find that "dladm_parse_props()" is called from do_create_aggr and do_create_vlan in addition to the expected (by me, at least) do_create_vnic *linkprop functions. What happened here? Why do we pass in

Howdy, I just installed the crossbow snapshot from opensolaris.org, and bumped into an issue when attempting to create a virtual nic: $ dladm create-vnic -i 192.168.1.101 -d ni0 2 dladm: VNIC creation failed: No such file or directory (unknown diagnostic) When I truss the process, it looks like it''s failing when attempting to open the vnic pseudo-device: 100878/1:

How about Virtual Network Crossbar or VNX for short. Darren

Hi, Can you tell why my vnic built on top of an aggregation of 2 NICs of 1 Gbit/s doesn''t report a speed of 2 GBit/s ? [root at nazgul /]# dladm show-dev bge0 link: up speed: 1000Mb duplex: full bge1 link: down speed: 0Mb duplex: unknown bge2 link: down speed: 0Mb duplex: unknown bge3 link: down speed: 0Mb

Ok, I''m hoping this is a fairly trivial issue, and I''m missing something. I''m trying to use Solaris zones (Nevada Build 117) to act as a DMZ and a router, using exclusive IPs, VNICs (from Crossbow), and connecting to the internet (static IP from my ISP). I''ve got the DMZ working - that zone sees the internet, can do name lookups, ftp, telnet, ssh, etc etc etc.

I opened a bug report earlier today but it doesn''t seem to have been added to the bugs database. I''m posting here in case one of the Crossbow developers might see it and confirm this behavior. Description Duplicate packets are generated whenever an aggregate is introduced into the network configuration. We''ve ruled out switch ports and physical bge interfaces as