similar to: Restrict XCP use XenCenter?

Hi everyone, How many cores should show on command “top”? We have a 24 cores machine with XCP, we can see 24 cores show on XenCenter and xentop, But when use “top” and “cat /proc/cupinfo”, it only show 4 cores, Is this right? ----------------------------------------------------------------------- 黃獻輝（Hunag Hsien Hui） 中華電信研究所網路維運研究室 TEL: 03-4244997 Mobile: 0928-752495

Hi, The GUI screen visible in the browser has everything too small, can I adjust this _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

XCP Users: As many of you are aware, there are several open source products available for everyone to use when working with XCP. I would like to get some feedback on the various tools to get a feeling on how people are using XCP and these tools. Here are the tools that I am aware of (please respond if you are using another tool): * OpenXenManager -

Thanks for all the help... XVP seems quite high on requirements. Like it needs an SMTP server set up. I''m not sure I like that. I found a tool called BixData, it''s proprietary but with a free license for a limited number of managed servers. Being a fully fledged cloud management system, it''s true overkill for me and my 3-4 virtual machines, but at least it seems quite

I think the title says it all :) I got far enough along in the Xen documentation that the documentation recommended me to start using XenCenter to manage the server. Why am I being asked by XenCenter to register my XCP 1.0 server? I know it''s similar, but it''s not a Citrix XenServer... ;) >From what I can gather, XCP is open source freeware...correct me if I''m

Hello everyone, I have XCP installed on a machine, with a guest OS running windows 7. Is there a way to login locally on the host machine itself (as opposed to using the console view in XenCenter?). The reason I am asking is that I am trying to look at interactions between Xen and graphics cards, and I want to make sure that the graphics card is being used ( as opposed to rendering through RDP).

Hello Everyone, I am new with XCP. I''ve setup several hosts with* XCP 1.0* and manage it through XenCenter and command console. Each host has two NICs, one (xenbr0) connected to a physical switch for Internet (said sw1), the other (xenbr3) connected to a physical switch for internal network (said sw2). I am trying to setup VMs and VLANs on xenbr3. I created a virtual bridge by

Hi everyone, I have some question about the Xenopsd. I’ve read the wiki document but cannot understand where to use it, Is this different with XAPI ? What’s the main work for? Can anyone describe it more clearly about it? Thanks a lot!! _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users

Hi Everyone, I install XCP on a 12 core server, and with Hyper threading the core should show 24 core, When I use “top”, it only show 4 cpu, and I use cat /proc/cpuinfo it’s the same, But when I user “xentop”, the Dom0 have 24 vcpu, My question is ,how can I make sure the XCP use all CPU? Can anybody give me some hint ? klein _______________________________________________ Xen-users mailing

running xen cloud on my ubuntu12.04 box connecting with xencenter - i can create delete and monitor VM''s when i connect to the console i can see the console output but none of my keypresses or mouse clicks are registered in the VM everything i hit a key i get this in my xcp-xapi log [20120721T17:17:20.330Z|debug|xen|509 INET 127.0.0.1:80|Connection to VM console R:73c96b23cdd8|console]

Hello, I am using XCP 1.0 and am accessing it with XenCenter. I have three NIC''s and I have bonded two of them through the XenCenter frontend. I then create a VLAN using XenCenter and attach it to the bond0. I create a VM and create its NIC to use VLAN 10, which it does and when the VM boots the NIC shows Active inside of XenCenter. When I look at the XCP host it shows VLAN 10 as an

Hi, all I''m totally new to XCP, so maybe i misunderstood the documentation. I tried to create Debian Squeeze (64-bit) and Ubuntu 10.04 from templates and install them from network installation. For Debian Squeeze (64-bit), I did the followings: 1. First ssh login into XCP host 2. xe vm-install template="Debian Squeeze (64-bit)" new-name-label=lenny-64-netinstall

Hi, I have installed XCP 0.5 on the HP Server. To create VM''s i installed Xencenter V5.6.0(Build 31188). Adding the server is successful but after that it get the below error. "The version of Xencenter is out of date and cannot connect to "hostname" " Please also check the attached log & let me know any possiblity to connect from Xencenter client. -- Regards,

Hello, Is it required to install an additional VNC server on XCP 1.1.0 dom0 box (ip 192.168.1.50)to get access to VNC-windows for installing domU guests? As I don''t use m$ / XenCenter so I need VNC for installation of new guests. The VM is running (s. below) *but* I was not able to open VNC window to continue the installation (s. error message further below) # --- uuid ( RO)

Anyone here using the XCP 1.0 Storage EqualLogic has the dell? In Citrix XenServer Xencerter appears to integration, but in XenCenter not with XCP. I read that the drivers were removed. No way around installing the drivers again? Cordialmente, Lorscheider Santiago +55 85 81559040 Msn: lorscheider_santiago@hotmail.com Visite meu blog: http://lsantiago.spaces.live.com Twitter:

Hi, I am new to citrix xen server. I have sucesfully installed citrix xen server 5.6.1 Fp1(free version) on my system. and through xencenter I have connected citrix xenserver and created vm (centos 5.5 32 bit), Installed Xen-tools in centos. My xenserver and xen vm ip details are below Xenserver Ip address - 192.168.1.5 Netmask - 255.255.255.0 Gateway - 192.168.1.1 which is my xencenter

same problem with Windows XP SP3 some problem accessing with XenCenter from different clients (XP and W7) the only interesting logs seem: [20130906T07:25:14.943Z|debug|titanio|191 INET 127.0.0.1:80|Connection to VM console R:73f4468306ca|console] Proxy exited [20130906T07:25:14.947Z|debug|titanio|96 INET 127.0.0.1:80|event.from D: 1327d493dfe8|backgroundscheduler] Removing function

I just noticed OpenXenCenter (aka OpenXenManager) that is an open source replacement for Citrix's XenCenter. This tool works with XenServer. But as per the blog entry: http://blog.xen.org/index.php/2010/02/09/xen-cloud-platform-installation/ it is also supposed to work with Xen Cloud Platform. XCP is licensed GPL2 and is a combination of multiple packages. Has the team looked at the

I am able to start kick off windows/linux installs on a new vm but then find the installation can''t read from the dvd-rom....xe cd-list reports the dvd-rom as scsi? I am using xcp 1 beta and xencenter fp1. Any help would be appreciated. Thanks, Chris _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

Hi, I am a newb to XCP and somewhat to Linux. I set up XCP on a test machine and used xe to configure a couple of VMs. The VMs are working fine but if I deploy XCP with only xe to manage machines, the others here will want my head on a plate. I set up a Fedora client on a different machine and installed Virtual Machine Manager. When trying to connect via SSH, I get an error that says