similar to: XCP: Support for driver domains

I''m needing to put a network card on a test server XCP 1.0. I''m seeing the citrix hcl (http://hcl.xensource.com) and I''m a doubt. I base that on which version to look for a compatible card? If the kernel is the same as in 5.6.0 FP1, but if the version of XCP uses the hypervisor 3.4.2 neither appears on the list. ps: I had a RTL-8169 but stopped working with update 0.5

Hello Everyone, I am new with XCP. I''ve setup several hosts with* XCP 1.0* and manage it through XenCenter and command console. Each host has two NICs, one (xenbr0) connected to a physical switch for Internet (said sw1), the other (xenbr3) connected to a physical switch for internal network (said sw2). I am trying to setup VMs and VLANs on xenbr3. I created a virtual bridge by

Dear all, How to make XCP cannot management by XenCenter? We have an environment about 10 XCP host, and provide about 50 vm for users, We notice that some users want to use XenCenter to connect the XCP host, even they don’t have password, so we want to make XCP cannot use XenCenter and only for console management, is it possible? Sorry for the strange question,

I think the title says it all :) I got far enough along in the Xen documentation that the documentation recommended me to start using XenCenter to manage the server. Why am I being asked by XenCenter to register my XCP 1.0 server? I know it''s similar, but it''s not a Citrix XenServer... ;) >From what I can gather, XCP is open source freeware...correct me if I''m

Hi All, I want to test REMUS over XEN, I would like to know the basic steps to be followed . I have installed xen4.1 on debian and i didn''t find any command related to remus, is there any steps which i have to carry out? _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hai, I am using dell insprion 580 machine for xen installation and dom0 configuation. I compiled xen source code and configured the kernal. Grub entry given below menuentry ''Xen 4.0.0-rc8 / Ubuntu 10.4 kernel 2.6.32.25 pvops'' { insmod ext2 set root=''(hd0,3)'' multiboot (hd0,3)/boot/xen-4.0.0-rc8.gz module (hd0,3)/boot/vmlinuz-2.6.32.25 dummy=dummy

Hai, I am using dell insprion 580 machine for xen installation and dom0 configuation. I compiled xen source code and configured the kernal. Grub entry given below menuentry ''Xen 4.0.0-rc8 / Ubuntu 10.4 kernel 2.6.32.25 pvops'' { insmod ext2 set root=''(hd0,3)'' multiboot (hd0,3)/boot/xen-4.0.0-rc8.gz module (hd0,3)/boot/vmlinuz-2.6.32.25 dummy=dummy

On Wed, May 25, 2011 at 12:41 AM, JAMES BOND 123 007 <james123007@gmail.com> wrote: > Hi , > I saw your thread post at > http://web.archiveorange.com/archive/v/ZvO4jnaavtTfcyqnHoRX > , about problems with XEN 4.0 installation. > I have the same problem and my machine is similar to yours( HP Proliant > DL380G6, 4GB-RAM) This question is better asked on the xen-users list.

Hello, I have a Gentoo Linux guest, which was working very well with the past xm tool stack. Since the migration to xen-4.1.1 and to the new xl tool stack, I have a problem for the IP assignation. Actually, when dhcpcd starts at boot time the IP address is not correctly assigned. This also happens if I perform "dhcpcd eth0" once I''ve accessed to the guest shell. I

Hi everyone, How many cores should show on command “top”? We have a 24 cores machine with XCP, we can see 24 cores show on XenCenter and xentop, But when use “top” and “cat /proc/cupinfo”, it only show 4 cores, Is this right? ----------------------------------------------------------------------- 黃獻輝（Hunag Hsien Hui） 中華電信研究所網路維運研究室 TEL: 03-4244997 Mobile: 0928-752495

Hi List, is it possible with the virt-manager to choose a drbd device? Example: 9:testsever Connected Primary/Secondary UpToDate/UpToDate C is running on /dev/sda9 but I can´t use it as a drive. (syntax?) Best, Mike _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi *, having built Xen 4.1.0 and running my Dom0 on Slackware 13.1, I''m trying to assign different physical network interfaces to different DomU guests: vif = [ ''bridge=ethX'' ] in the DomU configuration files. My /etc/xen/scripts/network-bridge script, however, doesn''t create more than one bridge: root@cen:~# /etc/xen/scripts/network-bridge start

So Working on CEntOS 5 I am trying to sett up Xen with 2 bridges, one that connects dom0 and most of the domU to the physical card and the out to the network. Got that figured out no problem, now i want to have a second bridge that runs a local network for all the doms that doesn''t connect to the network. With code I have found used in multiple places I can easily get 2 bridges, and

Hi all, I follow instructions(http://wiki.xensource.com/xenwiki/XenParavirtOps) to build XEN and dom0 kernel. Building XEN has no problem, but there is an error which I cannot solve to build dom0 kernel. The brief instructions for building dom0 are get linux-2.6-xen code from git and make ARCH=x86_64 menuconfig, finally generate kernel.deb. (I did every step exactly as the web page says)

Recently I installed Xen on my computer.But there are some problems during the starting time. The /var/log/xen/xend.log is follows: [2011-06-10 14:24:36 1395] DEBUG (XendDomainInfo:1794) Storing domain details: {''cpu/3/availability'': ''online'', ''description'': '''', ''console/limit'': ''1048576'',

Hi guys, I am testing out some FC storage in my XCP environment but I''m a bit confused on the right way to proceed. XCP actually sees the cards "under hardware in xsconsole". I made a lv available to the XCP box I''m testing on but both fdisk -l and via the XCP cli and ui the lv isn''t there. As I understand it from the documents I''ve read, you

I''ve just installed XCP and am looking about for a good GUI to control it. I''m not a windows person at all so would prefer a non-windows solution (ESXi really bugs me in that regard) Web based would be great, then it wouldn''t matter what system controlled it. (I usually use a Mac but also run Linux desktops) Has archipel been tried? Opinions on ease of install/use?

I''ve just been playing with XenSource and Kronos packages, but the fast cloning ability from XenServer doesn''t appear to be available. Where does this come from exactly, is it something built into Xen or is there a component of XenServer that''s needed to handle it? I was hoping to use Xen on Debian with my web app controlling it using either XAPI or Libvirt, but I

Hi Everyone, I install XCP on a 12 core server, and with Hyper threading the core should show 24 core, When I use “top”, it only show 4 cpu, and I use cat /proc/cpuinfo it’s the same, But when I user “xentop”, the Dom0 have 24 vcpu, My question is ,how can I make sure the XCP use all CPU? Can anybody give me some hint ? klein _______________________________________________ Xen-users mailing