similar to: 3ware 9550sx on CentOS 4.3 x64

My goal is to be able to install to the drive array on the 3Ware controller card. 3Ware does provide a RH WS 3 driver that I've tried to use; however, the RH Enterprise 3 WS driver doesn't work since that kernel is older than the CentOS-3.1 install kernel. I'm trying to create a centOS-3.1 installation driver disk for the 3ware 9500S card; however, I'm not having much luck.

I'm getting a couple of systems that are arriving with the new 3ware 9550sx controller. Does anyone know when this will be natively supported by CentOS? Has anyone built an RPM of the driver/module for this new controller?

Guys, I''m about to set up Xen on a dual Opteron server backed with SATA storage which is driven by a 3ware 9550SX controller. The problem is that as linux-2.6.12.6 has no support for this type of card by default, so I need to download & compile the driver the vendor provides. I did so (for the kernel 2.6.12.6-xen0) and generated an initrd image which gets loaded properly at bootime,

I'm trying to add XFS and ReiserFS to CentOS, integrating with Kickstart. I think I'm fairly close. I've added xfs.ko and reiserfs.ko to modules.cgz in initrd. Several of my partitions now specify --fstype=xfs. I can see tty5 mkfs.xfs is creating the XFS file systems. The system currently installs completely via kickstart, but it does not mount the XFS file systems while in the

Hi All, I have an "appliance" cd which uses CentOS 4.0 (Final) which I am trying to load on a new Dell 1950 server with a SAS driver controller. During the install it fails to find any disks to load to. I got the drivers from Dell and dd the correct one to a floppy, boot from the appliance cd and enter linux dd at the prompt. I load the driver in the install and it still fails to find

I would like to add a driver (bcm5700.ko) in modules.cgz. but there are several files modules.cgz . In which files I do have to add the drivers: - initrd.img ? - stage2.img ? - netstg2.img ? - hdstg2.img ? Denis -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20070118/6af6402d/attachment.html>

I'm new to the ISOLINUX development cycle, and I've tried a few times to come up with a solution. I'm trying to recompile isolinux.bin to look for the config files in a directory other than root, /boot/isolinux, or /isolinux. Ideally, this directory would be /lpc/isolinux. I've tried changing the plain text values in isolinux.asm to reflect these changes and recompiling using

<br><font size=2 face="sans-serif">Has anyone &nbsp;compiled a viable driver for a 3ware 9000 Escalade controller on CentOS-2 from source?</font> <br> <br><font size=2 face="sans-serif">Appreciate tips on getting this to work.</font> <br> <br><font size=2 face="sans-serif">Ive already dealt with the

From a buddy of mine that has spent a little time with the new cards. This was in response to my email asking about his impressions of them: It just came out in mid-September. There are a couple reasons I'm not thrilled with it: 1) no 8-port multilane version (only 12) 2) the 8-port non-multilane version is a kludge, connector-wise (a row of 3 double-stacked connectors along the

I will install CentOS 4.3 and downloaded the driver disk from Dell for RedHat Enterprise Linux 4: Description: Dell PowerEdge RAID Controller 5 Device Driver for Red Hat Enterprise Linux 4.0, X86 & X86_64 I saw a few minutes ago that the driver disk is extracted within /tmp/ramfs/DD-01. Therfore I know that the network is working correct. I will try to extract the module and insmod/modprobe

Kickstart fails for statically built custom booting kernel, although the custom kernel is built form the same version stock kernel source. My anaconda and kernel source are both of stock versions on Centos 5. At the kickstart 'F3' screen, the following error messages appear: Modules to insert tg3 ... ... ERROR: no network devices in choose network device! ERROR: no network drivers

I am trying to determine how to best increase the number of routing tables available in linux 2.6 to more than 255. I realize this involves increasing the storage of some messages to and from the kernel in addition to kernel changes (from browsing the code), and was hopeful that someone might know what the correct solution would be or could point me in the right direction (like existing patches

Hi, to install current PC models (with new Intel NICs) via Kickstart/PXE, I wanted to add the newest e1000e-Treiber to initrd.img. With this modified image, the Kickstart kernel crashes with the following error messages: [...] md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 RAMDISK: incomplete write (20480 != 32768) 6062080

Quite simply, HOW? :) I have the pxeboot initrd.img from the RH 3.0 AS CD's. We need to put a new cciss.o driver from HP into this initrd.img. Unforunately, the modules in the pxeboot initrd.img we have are 2.4.21-4 and our new driver is compiled for 2.4.21-15, so we have to upgrade everything. I downloaded the kernel-BOOT-2.4.21-15 RPM and installed that, so I have all those drivers. My

Dear list, I thought I'd just share my experiences with this 3Ware card, and see if anyone might have any suggestions. System: Supermicro H8DA8 with 2 x Opteron 250 2.4GHz and 4GB RAM installed. 9550SX-8LP hosting 4x Seagate ST3250820SV 250GB in a RAID 1 plus 2 hot spare config. The array is properly initialized, write cache is on, as is queueing (and supported by the drives). StoreSave

Great thanks, I'll test your config files now! some questions before: > I would also recommend Installing the 'acl' & 'attr' packages (if not already installed), those are installed and at the latest version on the file share server, are they needed on the AD too (I would think no)? > read up on using POSIX ACLs and lose the 'force' lines in the member

I know there are a few 3Ware fans here and I was hoping to find some help. I just built a new server using a 3Ware 9550SX-4LP with four disks in raid 5. The array is fully initialized but I'm not getting the write performance I was hoping for -- only 40 to 45MB/Sec. 3Ware's site advertises 300MB/Sec writes using 8 disks on the PCI Express version of this card (the 9580 I think.)

I just built up a server running CentOS 4.3, and trying to boot from a 3Ware 9550SX-16ML, 16 port card. This system has 9x500GB drives, AMD Opteron, Tyan K8SD mobo and 1 GB of ram. I downloaded the latest (9.3.0.4) driver from 3Ware, and after a couple of botched attempts, I got CentOS installed. In my two botched attempts, the problem was X hanging during the formatting of the drives, so I

On 01.07.2015 12:10, Gene Cumm wrote: > On Wed, Jul 1, 2015 at 4:35 AM, poma <pomidorabelisima at gmail.com> wrote: >> >> To remind you once again. >> ISOLINUX >= 6.00 built with GCC >= 5.0.0 causes a broken boot. >> This relates specifically to the use of the vesamenu.c32, >> menu.c32 works without problemos. > > isolinux-debug.bin is not for

I've just noticed that 3Ware has a more current version of the firmware for the 9500S than I have on several machines. All of mine are running: 3w-9xxx: scsi0: Firmware FE9X 3.04.00.005, BIOS BE9X 3.04.00.002, Ports: 8. and the latest rev appears to be 3.08. I'm wondering if there is any compelling reason to upgrade or just let these sleeping dogs lie. :) Any sage (or other)