similar to: Battery applet missing Compaq R3000

Hello list, I'm sure this is something simple I'm missing. On CentOS 4.6 fully updated, stock Firefox, if I type in http://www.youtube.com in the address bar it always goes to http://tw.youtube.com and has the encoding all messed up. Same happens if I click on any link to youtube. SeaMonkey does not display the same symptoms and works correctly. firefox-1.5.0.12-0.10.el4.centos.i386

Hello all, Just for kicks I plugged in a Microsoft wireless optical desktop 1000 keyboard/mouse combo into my Centos 4.5 machine. It recognized it on boot and configured it and it mostly works good. The issue is with the mouse, when I hold it over a folder on my desktop for a second or so it grabs the folder and opens a small menu as if I was using my middle button on my Logitech. All this

Hi All, I put my Compaq R3000 UPS on NUT. Every once in a while the battery alarm light turns on, on the front of the UPS. Maybe once every couple of days or so. When that happens I get the following output in /var/log/messages: Sep 22 01:51:46 mail upscode2[90734]: Unknown response to UPDS: .20 MOUL1 Sep 22 01:51:46 mail upscode2[90734]: Unknown response to UPDS: 0119.20 MOIL1 Sep 22

Hello all, Tonights updates seriously broke Evolution as it no longer starts on two 4.4 up-to-date boxes. When I run "evolution" from the cli I get this: $ evolution (evolution:4865): evolution-smime-WARNING **: Failed all methods for initializing NSS The updates included firefox, seamonkey, seamonkey-nspr, and seamonkey-nss. A reboot causes no change, Any ideas? Marvin Eberly

Hi I have a HP R3000 XR UPS which NUT never says is at 100% battery. It seems stuck in 98 or 99 . something percentage. How accurate should i expect the reports to be? All my other UPSes has been and is at 100%, even those i have retired. My monitor system runs debian. The host that is physically connected to this ups runs: nut 2.2.2-6.4 The web script runs nut-cgi 2.0.4-4 JonB

Hi Matthijs, > Arnaud. >After some trial and error, i found out that the HP R3000 XR ups's we have >can be used with Network Ups Tools. >This using the bcmxcp driver. > >Note that in the code of this driver (line 1420) , the Baudrate is fixed to >9600 baud. >to connect to a serial HP R3000 XR ups one needs to change this to 19200 >baud. > >ideally, this should

Hi, So far I've gleaned heaps of useful info from the list and got mostly running with NUT. There was a thread by Paul Battaglia and Kjell Claesson about the R3000 which has helped me get so far, but now with the patched driver I still have this on startup: # /usr/local/ups/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.0.5 Network UPS Tools - BCMXCP UPS driver 0.11

All, I have a fairly old Compaq R3000h which is overdue for new batteries. Before I go and splash out a few hundred francs, I'd just need a quick sanity check - when I disconnect the power (UPS under load), it cuts out pretty much right away, so the batteries are flat (even though the charge indicator says full). When I reconnect the power, the surge triggers a 16A mains fuse. This sounds

Now I have some access problems. This is what ends up un messages Hosts.allow is set to accept anyone on the local net. Username and passwords are the same Upsc gives proper output. System is Centos 6.8 Jul 22 17:20:06 BIFROST upscode2[10113]: Startup successful Jul 22 17:20:06 BIFROST upsd[10116]: listening on ::1 port 3493 Jul 22 17:20:06 BIFROST upsd[10116]: listening on 192.168.0.1 port 3493

Hello list, I've installed NUT on an HP blade server, and I try to get it communicating via SNMP with 2 HP R3000 UPSes, each fitted with a AF465A management card. To do this, I used the snmp-ups driver, and configured it for the "cpqpower" MIB. Communication with the UPSes is established. My problem is that both UPSes constantly return the "OL OB" status which, in

Hi All, I'm trying to communication with the HP r3000 XR UP using the latest stable build and I'm getting the following errors. Can anyone enlighten me with the errors below and what other course of action I can take. Thanks in advance. Paul. [root@WRRFtpServer etc]# /usr/local/ups/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.0.5 Network UPS Tools - BCMXCP UPS

I have setup nut-2.4.1 with the bcmxcp driver for my HP R3000 XR unit and although it appears to work, I receive the following sorts of errors in syslog: Aug 27 10:33:05 sv18 bcmxcp[6373]: Communications with UPS lost: Receive error (data): got 0 bytes instead of 64!!! Aug 27 10:33:15 sv18 bcmxcp[6373]: Communications with UPS lost: Receive error (data): got 0 bytes instead of 64!!! Aug 27

Additional question: I noticed on the HP Website that the latest version of "CPQPOWER.MIB" (1.76, dated Sept. 19, 2013) was more recent than the related file (./drivers/compaq-mib.c) in the NUT driver. Is the MIB structure as implemented on the management card perhaps no longer in line with the NUT driver ? The latest MIB file can be downloaded from the following URL:

Further information on this issue, attn. Arnaud Quette: Here is the result of a test I made a few days ago. I've pulled the input plug on the UPS and watched the 3 critical OIDs through a MIB browser: - 1.3.6.1.4.1.232.165.3.4.5.0 goes from 3 (OL) to 5 (OB) (as expected => good) - 1.3.6.1.4.1.232.165.3.7.3.0 stays at 1 (OB) (=> seems meaningless) - 1.3.6.1.4.1.232.165.3.7.4.0

UPS: HP R3000 XR with HP UPS Management Module What I Want: I just want the UPS to shut down the client called "tor" before the UPS power drains out, I'd prefer to use a direct serial cable instead of network, in case the network doesn't work. I'll manage the UPS trough the ethernet using the built-in HTTP webinterface in the HP UPS Management Module. I've created a

I tried out Scientific Linux 6 Live to see (basically) what I can expect with CentOS 6 and was pleased to find that everything looks pretty familiar and is easily customizable to make it look and feel like 5.6 -- except for one thing that I also noticed in Ubuntu's newest beta (my Dad uses Linux Mint). For whatever reason, Gnome has decided to put the Volume Control and Network Manager in the

Hello, Does anyone here happen to have a copy of the firmware for this UPS? Any links on the HPE website I could find (pointing to the old HP) are long dead. Thanks! Marek

Hi! Have a similar issue with one of our customers having HP R12000/3 UPS with AF430A card. Upsmon shows the UPS as Online, on Battery and Battery discharging at the same time: [root at smrsrvslv06 lib64]# upsc hpups at localhost ambient.temperature: 19.0 ambient.temperature.high: 0.00 ambient.temperature.low: 0.00 battery.charge: 94.00 battery.current: 0.00 battery.runtime: 4620.00

Hello Arnaud, On 05/04/14 22:01, Arnaud Quette wrote: > Philippe, Ivan, > > please see https://github.com/networkupstools/nut/issues/118 > and send back your data. I've pasted the requested files in github, but the auto-formatting may have damaged them, so here they are. Also, when I ran gen-snmp-subdriver.sh, it gave me the following message:

Philippe, Ivan, please see https://github.com/networkupstools/nut/issues/118 and send back your data. cheers Arno -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20140405/682f10dd/attachment-0001.html>