similar to: Changing mount point - 4.3

I think this is likely a bug with either mount or glusterfs: [root at vm-container-0-0 ~]# cat /etc/fstab LABEL=/ / ext3 defaults 1 1 LABEL=/state/partition /state/partition1 ext3 defaults 1 2 LABEL=/var /var ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults

Hi all, I have another problem with starting domainU (xenolinux). I took me pretty much quite some time and i can not figure out why starting a new domain is failing. I will really appreciate if somebody can help me with this error. The error I get when booting xen-domainU is: /======================= Red Hat nash version 4.1.18 starting Mounted /proc filesystem Mounting sysfs Creating /dev

Peter Kjellstr?m wrote: > On Monday 23 January 2006 16:46, Plant, Dean wrote: >> I need to downgrade a system from Centos x4.2 to v3.6 (x86) due to >> performance problems with Arkeia Network Backup and AIT-4 tape >> drives. The backup database is stored on a v4.2 created ext3 >> partition. When accessing this partition after the downgrade, Centos >> complains on

Hi, I''m hitting this issue - sda5 is a normal device, nothing to do with loop, encryption etc. # mkfs.btrfs /dev/sda5 WARNING! - Btrfs v0.19-35-g1b444cd-dirty IS EXPERIMENTAL WARNING! - see http://btrfs.wiki.kernel.org before using error checking /dev/sda5 mount status Is there something I can do to resolve this? Thank you Lubos -- To unsubscribe from this list: send the line

Hi, I planned to boost my btrfs performance today. here some errors I met: my ''btrfs filesystem show'' result: ~ # btrfs filesystem show failed to read /dev/sr0 Label: none uuid: 9b9aa9d9-760e-445c-a0ab-68e102d9f02e Total devices 1 FS bytes used 36.59GB devid 1 size 49.52GB used 49.52GB path /dev/sda6 Label: none uuid: 559dec06-4fd0-47c1-97b8-cc4fa6153fa0

Hi I had installed Xen-3.0.4 in Scientific linux 4 (kernel version 2.6.16.33) by following the instructions given in following link project-xen.web.cern.ch/project-xen/xen/howto_slcXen.html I ve created the guest Domain with fedora image of size 2.2GB , disk space as 10GB and the domain started successfully . when i logged into the xm console and checked the disk space its showing only 2.2GB ..

Hi, I have 2 identical xSeries 346 with 2 identical IBM 72GB scsi drive. What i did is install the centos 4.2 serverCD on the first IBM and set the HDD to raid1 and raid0 for swap. Now what i did is get the 2nd HDD in the 1st Server swap it with the 1st HDD in the 2nd Server and rebuild the Raids. The 1st server rebuild the array fine. My problem is the Second server, after rebuilding it and

Hi, I have high IO-Wait on the ods (ceph), the osd are running a v3.1-rc9 kernel. I also experience high IO-rates, around 500IO/s reported via iostat. Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sda 0.00 0.00 0.00 6.80 0.00 62.40 18.35 0.04 5.29 0.00 5.29 5.29 3.60 sdb

I need to downgrade a system from Centos x4.2 to v3.6 (x86) due to performance problems with Arkeia Network Backup and AIT-4 tape drives. The backup database is stored on a v4.2 created ext3 partition. When accessing this partition after the downgrade, Centos complains on boot that fsck.ext3: Filesystem has unsupported feature(s) (/dev/sda5) *fsck: Get a newer version of e2fsck! [fail] If I

Hi there, I'm new to ext3, so I hope you won't find my question to be stupid. I also hope this isn't the 1,000,000th time someone posts it. My problem is the following: I converted my ext2 systems to ext3 using tune2fs -j /dev/sda2 (or 5 for my /home, 2 is my root) Then I modified fstab and put ext3 for each. After a reboot, the mount command says they are mounted as ext3. But when I

Hi, I am attempting to get Xen working on my Mandriva Linux and I can only get as far as the initial loading screen which happens to be failing with: "xen will only load images built for xen v3.0" I am following the instructions outlined at http://qa.mandriva.com/twiki/bin/view/Main/HowToXen Any hints on where I should start debugging this problem? cheers, Jeffery

Hi, I have a mailgw running Centos where trendmicro(IMSS) is installed. it works perfectly. Now, the problem is it is running out of Harddisk. pls see below and pay attention to / file system (/dev/sda6), where only 1.3 gb is available. these are not Logical volums (LVM) [root at gateway 17141]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda6 9.7G 7.9G 1.3G

Have amd64 xen 3.1 installed on debian etch. Have all the domu file systems in lvm. Problem 1 If I have a xfs files system when I mount it on domu I get this error: Filesystem "sda5": Disabling barriers, not supported by the underlying device XFS mounting filesystem sda5 Ending clean XFS mount for filesystem: sda5 If I mount with nobarriers the message goes away. If I mount under

Hi All, I am having an issue with an XFS filesystem shutting down under high load with very many small files. Basically, I have around 3.5 - 4 million files on this filesystem. New files are being written to the FS all the time, until I get to 9-11 mln small files (35k on average). at some point I get the following in dmesg: [2870477.695512] Filesystem "sda5": XFS internal error

Hi, Now with the new libguestfs-1.27.55-1.1 I have this new issue : libguestfs: trace: is_file = 0 libguestfs: trace: is_file "/freedos/freedos.ico" libguestfs: trace: is_file = 0 libguestfs: trace: is_file "/boot/loader.rc" libguestfs: trace: is_file = 0 libguestfs: trace: umount_all libguestfs: trace: umount_all = 0 libguestfs: trace: vfs_type "/dev/sda2"

Hi, I''m starting to play with btrfs on my new computer. I''m running Gentoo and have compiled the 2.6.31 kernel, enabling btrfs. Now I have 2 partitions (on 2 different sata disks) that are free for me to play with, each about 375 gb in size. I wanted to create a "raid1" volume using these two partitions, so I did: # mkfs.btrfs -d raid1 /dev/sda5 /dev/sdb5 # mount

Maybe best asked to Axel... I'm re-building my server from scratch (the old one was MDK 10.1 -> Mandriva 2006.0 with Postfix/Courier) and I want to install the latest versions postfix/mysql/postfixadmin/dovecot/squirrelmail. I've been building Dovecot (and postfix) from tarballs/srpm in the past so I know more or less how it all fits together. But I wonder if 'old' patches

Hi, guys. I''m trying to use physical disks as virtual disks in HVM domains. But I couldn''t. I''m using cs10508 of xen-unstable.hg. When I use disk = [ ''phy:sda5,ioemu:hda,w'' ] in conf file, creating HVM domain says, I need to use ''file'' modifier if I use ''ioemu''. So, I changed it to disk = [

hi, for some reason i can not get vista ultimate to install. i get to the page where i enter the user name and password and at the next reboot, it just gets stuck in the boot loader - see attachment. the cpu usage goes to 50% and that was it. has anyone else experienced this ? it does boot a couple of times, but i guess that it is from the installation image. created domU using the virtual

I have seen this happen a number of times: Jun 13 13:58:16 n202 kernel: EXT3-fs error (device sda5): ext3_get_inode_block: bad inode number: 9 Jun 13 13:58:16 n202 kernel: Aborting journal on device sda5. Jun 13 13:58:16 n202 kernel: EXT3-fs error (device sda5): ext3_get_inode_block: bad inode number: 9 Jun 13 13:58:16 n202 last message repeated 6 times Jun 13 13:58:18 n202 kernel: ext3_abort