similar to: Hardware Raid cards RAID 0 / 1

Any tips on patching this? Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20061009/690483bf/attachment-0002.html>

How can I tell if its running? Where is the default location? Thanks.. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20080528/647f6634/attachment-0005.html>

Hi, Up until now, I've only installed Linux either on "desktop" hardware, meaning one of the desktop PCs in the LAN acted as a server machine for the network, or I rented some dedicated server somewhere in a datacenter. Last week I bought some server hardware, a used HP Proliant ML150. It's the first time I am dealing with this sort of hardware. The hardware was sold

Hi to All, I dont know much about PCI express slots in newer Servers, my doubt is if the Digium and Sangoma PCI express cards, are compatible with the x8 PCI express slots that come in the HP Proliant ML150 G5 server. Thanks in advance. Ricardo -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I currently run samba with server min protocol = NT1 but I need to move towards server min protocol = SMB2 is there any way I can detect which clients still use the older protocol versions? I would like to estimate the impact of the change before i do close NT1/SMB1. Thank and kind regards, Heiner Billich

Hello all, I've been on a real roller coaster ride getting a large virtual host up and running. One troublesome thing I've discovered (the hard way) is that the drivers for Marvell SAS/SATA chips still have a few problems. After Googling around quite a bit, I see a significant number of others have had similar issues, especially evident in the Ubuntu forums but also for a few

Hello Get this on first write made ( by deliver sending mail to inform of the restart of services ) Home partition (the one receiving the mail) is based on ocfs2 created from drbd block device in primary/primary mode These drbd devices are based on lvm. system is running linux-3.5.0, identical symptom with linux 3.3 and 3.2 but working with linux 3.0 kernel reproduced on two machines ( so

Hi, I'm determined to get R compiling & running on a machine running AIX 4.2. I've seen previous emails in the archive about this topic. The main obstacle is getting dynamic loading to work, but it works for Tcl and hence is feasable. Questions: - is anybody _currently_ working with R on AIX? - why have previous fixes to the sources not been introduced into the released

Hi, I'm determined to get R compiling & running on a machine running AIX 4.2. I've seen previous emails in the archive about this topic. The main obstacle is getting dynamic loading to work, but it works for Tcl and hence is feasable. Questions: - is anybody _currently_ working with R on AIX? - why have previous fixes to the sources not been introduced into the released

My guys, My firewall seems to block an attack my Centos / Sendmail boxes on port 110. These servers require a reboot after each attack. My firewall says it's blocked? Do I need to patch something on sendmail? Or is my firewall not doing its job (Sonicwall)? This is not the first time this has happened. 11/20/2008 02:53:04.864 - SYN flood attack dropped - 75.2.205.141, 48102 -

I have a hardware here with 9 NICs (8 of them on-board) and I want to set up 8 NICs as real network interfaces, one for each xen domain. The 9th NIC should be Domain-0 which is working well. Currently I have only set up one domain which is running in bridged mode at the moment. I am currently trying to set up a second domain which uses eth2 but I didn''t succeed. I want to get the

Jonathan Billings wrote: <snip> >> And *why* random NIC names? Quick, you've got servers from 5 >> manufacturers, of different ages... what's the NIC going to be called? >> Do names like enp5s0 offer any convenience to *anyone* not a hardware >> engineer? > > Unrelated to systemd. This actually started happening in RHEL6 with > the biosdevname

Hello, I am trying to make a small server around the team that we experiment together. I gave permission to read to all users and i gave permissions to write only to some of them, dependent on the folder. Folders are in second HD that is auto mounted at boot through fstab. All folders and sub folders have permission to read and write changed to user , group , other. users : me, harald, heiner

He Everyone, We found out that till version 3.02 the Yukon nic is supported after it gives code errors, i'm working a lot with ehtherboot via drbl / clonezilla, and together with Steven Shiau we ask you guys if you can arrange that the Yukon can be supported again. Our thanx in advance. Dave & Steven

Bouncing a thread from the device drivers list: http://opensolaris.org/jive/thread.jspa?messageID=357176 Does anybody know if OpenSolaris will support this new Supermicro card, based on the Marvell 88SE6480 chipset? It''s a true PCI Express 8 port JBOD SAS/SATA controller with pricing apparently around $125. If it works with OpenSolaris it sounds pretty much perfect. --------------

Hi, guys. I''ve been trying to use the pci-phantom command line options to xen so as to work around the hardware issue with the Marvell 88SE91xx SATA controllers in IOMMU ([Intel:] VT-d) mode, but I cannot seem to get my head around it. From having had a glance here: http://xenbits.xen.org/docs/unstable/misc/xen-command-line.html and in particular the syntax described as such:

Hello, I'm trying to install CentOS 5.2 on an HP 6730s notebook. All's going well except for one little item -- the networking. Never thought I'd have trouble with an Ethernet adapter, so I didn't even check before buying this machine; it was cheap. The adapter is a Marvell Yukon 88E8042 PCI-E Fast Ethernet controller. I can't find a Linux driver for it except one that

I am having problems getting my 64-bit Debian Squeeze (Xen version 4.0, Linux Kernel 2.6.32) dom0 to recognize a harddrive connected to a secondary sata controller. My motherboard is a Gigabyte GA-X79-UP4 and has two sata controllers. The first is controlled by an Intel X79 chipset and the second is controlled by a Marvell 88SE9172 chip. During the initial install of Debian everything is fine and

I am trying to build a file server with 1 x 80 GB main drive and 4 x 500 GB SATA drives in RAID in a Supermicro 3U server. I found out the hard way that Centos 4.2 does not have a driver for the onboard Marvell H2 controller the drives are connected to. Supermicro techs sent me aar81xx.rhel4qu2.i686.img as an img file. I used dd to copy to a floppy and dd confirmed successful write. I booted

Adjust drivers that support the 'FLOW_DISSECTOR_KEY_META' key to reject filters that try to match on the newly added layer 2 miss option. Add an extack message to clearly communicate the failure reason to user space. Example: # tc filter add dev swp1 egress pref 1 proto all flower skip_sw l2_miss true action drop Error: mlxsw_spectrum: Can't match on "l2_miss". We have