similar to: mbox or maildir?

Am Trying to use nut (2.2.0 - on an SMEServer V8 aka Centos 5.5) on the above UPS, I've tried the megatec driver in serial and USB mode (the device has both types of connection), but no success. An Example: [root at mailserver ~]# megatec_usb -a UPS -DDDDDDDD Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport

I am sorry if this is an FAQ, but there doesn't seem to be searchable archives, and the supported manufacturer's list doesn't include "surge master". Google was also not much help. I have just put a Linux box and the customer has a "surge max " UPS. Anyone any ideas what protocol it uses? There is a Green serial cable. The manufacturers web site is here:

Hi All I know this is not a LPRng list but I'm trying to build the latest SRPM from http://lprng.sourceforge.net/DISTRIB/LPRng/LPRng-3.8.27-1.src.rpm so that I may use it on my CentOS 5 box, but it fails with the following errors <snip> + make MAKEPACKAGE=YES if [ "UTILS" = po ] ; then \ for i in po/Makefile* ; do \ if [ -f "$i" ] ;

RHEL 4 (and thus CentOS 4) do not have appletalk module included. CentOSPlus rather thoughtfully has the 'unsupported' version which would have the appletalk module but I have been unable to get the old megaraid driver to run compiled from the kernel-devel for these 'unsupported' kernels. Thus I would love to simply compile the appletalk module myself from the standard

In the up and coming wiki, don't forget to have an FAQ/Fight against FUD section. Looking at the web in January an upstream vendor employee said some things in his wiki. In Feb/March CentOS was discussed on the Fedora-list/Slashdot. - Common myths about the legality/ethicality of CentOS - CentOS providing value to Open Source as a whole - Projects emanating from CentOS like SMEServer

Hello again, I have a Sola 305 (aka Powerware 3110) here connected via a serial INT-0051 cable which I am trying to get working with nut. The driver.list file indicates that nut supports the Sola 305 when connected via the INT-0025C cable using the genericups driver with upstype set to 7 but it does not mention the INT-0051. I was able to use the "Basic CheckUPS II" utility provided

Hi, I?m using centos in 4 servers that work as gateway for intranets where i work. I built a particular kernel for my needs but this kernel is 2.4.31. So i neeed to boot this kernel in centos 4.3 and centos 4.2. Can anyone help with that? I know the problem is mainly in modutils because modules cannot be loaded when kernel is loaded. Any help is very much appreciated.

After failing to install on two different machines that were running Windows, I realized that one machine had a bad hard-drive, and the other bad memory. So I've collected the good parts into one machine and installed CentOS with SME. This was the fastest install of Linux I have every seen, 15 minutes done, configured, and running, web and email server. It is a very secure config, no GUI

Hi, OpenSSH 6.9 is almost ready for release, so we would appreciate testing on as many platforms and systems as possible. This release contains some substantial new features and a number of bugfixes. Snapshot releases for portable OpenSSH are available from http://www.mindrot.org/openssh_snap/ The OpenBSD version is available in CVS HEAD: http://www.openbsd.org/anoncvs.html Portable OpenSSH is

Hi all, I'm looking for a (preferably free) alternative to SME / Clark Connect. I basically need the following: - firewall - nat - VPN - bandwidth limiting / monitoring - email (SMTP / POP3 / IMAP) & groupware - file & printer sharing - RAID support - if possible fail-over / high availability support. I need to support about 15 - 30 (some part time) students, so I would like to keep

On Mon, Dec 1, 2014 at 11:18 AM, Rowland Penny <rowlandpenny at googlemail.com> wrote: > > Yes it is used in production :-) > > Samba has changed a little bit since 2001 :-D > Yes, I know it has. My point was that I've been working with Samba for quite some time, so this is not all new to me. I've also been contributing to the SME Server project on this front for

I have a Win2K3 domU (and thankfully an image backup of the LVM volume that holds its system disk) I previously installed GPLPV v0.8.9 drivers, the domU boots OK with or without the /GPLPV switch in boot.ini, however with the /GPLPV switch it tries and fails to use the Xen network driver, and so the machine is network-less, so for the past few months I''ve left it using pure HVM

I have been running a customized version Amahi for a couple years for my Samba server. It is time for an upgrade, and I will be moving away from Amahi, as they have abandoned Fedora for Ubuntu. Back when I selected Amahi to replace my 15 year old NT server, I looked around and only considered SME Server as an alternative, but they were still on Centos 4.7 with the Centos 5 based version

On Mon, Dec 1, 2014 at 11:09 AM, Rowland Penny <rowlandpenny at googlemail.com> wrote: > NO NO I can't take anymore :-D > > Please read the rest of the thread, it will explain all. People seriously use this in a production environment? The lack of documentation and confusion surrounding pretty basic posix auth is extremely surprising. I'm no noob at *nix admin and

I am working to deploy Samba4 on the SME Server: A customized version of Centos with a web management GUI and configuration API. One of the challenges we see is how we synchronize our SME Server configuration API with users who are created using tools outside of *nix. For example if a user were created using the windows administration tools. Are there any triggers in Samba that could be set to

Hi, amdgpu + IOMMU + SME is now working for me on 5.7, yay! But, it is broken on torvalds master, boo. On boot, depending on which exact commit I test, it either hangs immediately (with built-in driver, before starting initramfs), displays some errors then hangs, or spams the screen with many amdgpu errors. I bisected the black screen hang to: commit dce8d6964ebdb333383bacf5e7ab8c27df151218

Hi, amdgpu + IOMMU + SME is now working for me on 5.7, yay! But, it is broken on torvalds master, boo. On boot, depending on which exact commit I test, it either hangs immediately (with built-in driver, before starting initramfs), displays some errors then hangs, or spams the screen with many amdgpu errors. I bisected the black screen hang to: commit dce8d6964ebdb333383bacf5e7ab8c27df151218

I'm playing around with Domain Membership to a WIndows 2012 AD Server. It appears I'm able to join the AD domain, but the domain member doesn't seem to authenticate anything against the DC once joined. Here is my smb.conf netbios name = Member workgroup = ZARTMAN security = ADS realm = ZARTMAN.LOCAL dedicated keytab file = /etc/krb5.keytab kerberos method = secrets and

OK, an official OpenSSH advisory was released, see here: <URL: http://www.mindrot.org/pipermail/openssh-unix-announce/2003-September/000063.html > The fix is currently in FreeBSD -CURRENT and -STABLE. It will be applied to the security branches as well today. Attached are patches: buffer46.patch -- For FreeBSD 4.6-RELEASE and later buffer45.patch -- For FreeBSD 4.5-RELEASE and

I have Samba running as a PDC and it works perfectly, until that is, a Win 2000 user authenticated by the PDC and with a profile on the Samba server wants to access Word and then after a minute or so Word crashes, I got the same result with a Redhat PDC and also with an SME server distro. Informed suggestions other than dump Word are very welcome... John Russell Digital Media Lab University of