similar to: MD raid tools ... did i missed something?

I have a system that is RAID -1 configured as /dev/md0 is /dev/hda1 /dev/hdb1 /dev/md1 is /dev/hdb3 /dev/hdb3 it seems as though /dev/hda has failed.... I have another disk (identical model) that I can replace hda with. I know about the commands fdisk to repartion and raidhotadd /dev/md0 /dev/hda1 and raidhotadd /dev/md1 /dev/hda3 (to be ran after the system boots). BUT... how do I now get

Hi All Currently i'm setting up a 5.4 server and try to create a 3rd raid device, when i run: $mdadm --create /dev/md2 -v --raid-devices=15 --chunk=32 --level=raid6 /dev/sdc /dev/sdd /dev/sde /dev/sdf /dev/sdg /dev/sdh /dev/sdi /dev/sdj /dev/sdk /dev/sdl /dev/sdm /dev/sdn /dev/sdo /dev/sdp /dev/sdq the device file "md2" is created and the raid is being configured. but somehow

Hi, I have two 320 GB SATA disks (/dev/sda, /dev/sdb) in a server running CentOS release 5. They both have three partitions setup as RAID1 using md (boot, swap, and an LVM data partition). # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb1[1] sda1[0] 104320 blocks [2/2] [UU] md1 : active raid1 sdb2[1] sda2[0] 4192896 blocks [2/2] [UU] md2 : active raid1 sdb3[1]

This change involves rewriting make-fedora-img.sh in perl. This allows the flexibility to write mdadm.conf containing whichever uuids where randomly generated when the md devices were created. --- .gitignore | 2 + images/Makefile.am | 18 +++- images/guest-aux/make-fedora-img.pl | 194 +++++++++++++++++++++++++++++++++++

Hello, I have a weird problem after adding new PV do LMV volume group. It seems the error comes out only during boot time. Please read the story. I have couple of 1U machines. They all have two, four or more Fujitsu-Siemens SAS 2,5" disks, which are bounded in Raid1 pairs with Linux mdadm. First pair of disks has always two arrays (md0, md1). Small md0 is used for booting and the rest - md1

Hi, I've done some strange(?) experiments and I managed to get a panic of type "baddir" and just now another one that only rebooted my system instantly without writing a vmcore. I don't know if this is important. I could not find any information on how gvinum detects failed hard disks. That's why I tried something really simple. Steps to reproduce: 1) dd if=/dev/zero of=a

-------------- next part -------------- An embedded message was scrubbed... From: "Petr \"Qaxi\" Klima" <qaxi at seznam.cz> Subject: Re: [Centos] Release of centos-3.3 ISP bill Date: Wed, 27 Oct 2004 07:56:24 +0200 Size: 2686 URL: <http://lists.centos.org/pipermail/centos/attachments/20041027/6185ecd0/attachment-0003.mht>

Hello I experience performance problem with CentOs 4.4 Samba 3.0 Reading files from Samba (1 client WinXP) is 3 times slower than writing to samba. What should I look at? OS je CentOS 4.4 (RHEL 4 U4) # smbd --version Version 3.0.10-1.4E.11 CFG ================================================================== # cat /etc/samba/smb.conf [global] workgroup = GROUP netbios name = SERVER server

hi i can not find any info on RH ... -- Petr Kl?ma e-mail: qaxi at seznam.cz

I just installed CentOS 5.4 64 bit release on a 1.9ghz CPU with 8gB of RAM. It has 2 Western Digital 1.5TB SATA2 drives in RAID1. [root at server ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/md2 1.4T 1.4G 1.3T 1% / /dev/md0 99M 19M 76M 20% /boot tmpfs 4.0G 0 4.0G 0% /dev/shm [root at server ~]# Its barebones

Hello How do I switch off color mode on console (we have just BW monitor at the server) and not for all terminal connections? -- Petr Kl?ma e-mail: qaxi at seznam.cz

Hi All, I am learning iostat command to understand disk I/O statistics. We have 2 Centos 4 servers running where oracle is installed.We installed them 2 weeks ago. @ that time, These Servers performed well. But, Now We have come to know that these 2 Machines are quite slow when comparing to the first week. So, Some say, run iostat to see statictics. I am not familiar with comamnd well. I

Hello fellow xenophiles and happy new year! I''ve documented the install procedure for a prototype server here since I found no similar document Anywhere on the net. It''s a Sarge-based Domain0 on linux root raid from scratch, using LVM to store the data for the domU mail server and its mailstore. I humbly submit my notes in the hope that they are useful to some weary traveller.

Hi, I have a machine setup as software-raid + ext3 + redhat , but this morning, it seems the file system crash. here is the booting message, anyone has any idea how to fix it. Thanks! Donghui ---------------------------------------------------------------------------- ------ md: adding sda1 md: created md2 md: using <sdb1> <sda1> md: md2: raid array is not clean -- starting

Hello, I added a new disk into our RAID5 array, it looks like this: md2 : active raid5 sdd4[3] sde4[4] sda4[0] sdc4[2] sdb4[1] 3767274240 blocks level 5, 64k chunk, algorithm 2 [5/5] [UUUUU] # btrfs fi sh Label: none uuid: 5534d2e7-be31-49c7-8ab7-90c5ab8afe18 Total devices 1 FS bytes used 2.24TB devid 3 size 2.63TB used 2.63TB path /dev/md2 # mount ... /dev/md2 on /home type btrfs

I have configured 2x 500G sata HDD as Software RAID1 with three partitions md0,md1 and md2 with md2 as 400+ gigs Now it is almost 36 hours the status is cat /proc/mdstat Personalities : [raid1] md0 : active raid1 hdb1[1] hda1[0] 104320 blocks [2/2] [UU] resync=DELAYED md1 : active raid1 hdb2[1] hda2[0] 4096448 blocks [2/2] [UU] resync=DELAYED md2 : active raid1

This series fixes inspection in the case that fstab contains references to md devices. I've made a few changes since the previous posting, which I've summarised below. [PATCH 1/8] build: Create an MD variant of the dummy Fedora image I've double checked that no timestamp is required in the Makefile. The script will not run a second time to build fedora-md2.img. [PATCH 2/8] build:

Hi all, I'm setting up Centos4.2 on 2x80GB SATA drives. The partition scheme is like this: /boot = 300MB / = 9.2GB /home = 70GB swap = 500MB The RAID is RAID 1. md0 = 300MB = /boot md1 = 9.2GB = LVM md2 = 70GB = LVM md3 = 500MB = LVM Now, the confusing part is: 1. When creating VolGroup00, should I include all PV (md1, md2, md3)? Then create the LV. 2. When setting up RAID 1, should I

I installed Centos 6.x 64 bit with the minimal ISO and used two disks in RAID 1 array. Filesystem Size Used Avail Use% Mounted on /dev/md2 97G 918M 91G 1% / tmpfs 16G 0 16G 0% /dev/shm /dev/md1 485M 54M 407M 12% /boot /dev/md3 3.4T 198M 3.2T 1% /vz Personalities : [raid1] md1 : active raid1 sda1[0] sdb1[1] 511936 blocks super 1.0

Hi. I woke up this morning to find a ton of waiting emails complaining that some cron jobs on my system couldn't run because one of my filesystems (ext3 on software RAID 1) was suddenly mounted read-only. Always nice when you're away from the server due to travel. ;^> I investigated in the logs and found: 2007-08-02 04:02:25 kern.crit www kernel: EXT3-fs error (device md2):