similar to: HP Surestore 12000e and multi-LUN

This is one of those autoloaders where the tape drive and the library share a SCSI ID, but are on different LUN's - specifically the library should be on LUN 1. Apparently since so many devices like this are broken, recent kernels don't probe beyond the first LUN, so it's not detecting the library. My /proc/scsi/scsi output: Attached devices: Host: scsi4 Channel: 01 Id: 00 Lun:

Hi all... I have a scsi Tape library. Centos only sees the tape drive portion of the library. I need to enable Multiple LUN support to get the library and tape drive recognized. I am looking for some help enabling multiple lun support in Centos 4. I had a procedure on how to do this in the 2.4 kernel but it doesn't seem to work in the 2.6. Any help would be appreciated. Config:

I am running CentOS 3.1 and everything is working beautifully except my HP12000e tape library that requires multi-LUN support. Every time I re-compile the 2.4.21 kernel with the multi-LUN SCSI option, I get the multi-LUN to work but something else breaks. Is there a pre-compiled kernel somewhere that is similar to the stock CentOS kernel except that it includes the multi-LUN feature? thanks!

Hi folks, Im trying to get a multi-card reader on centos (SD, MMC, and so, 4 card slots) and i have read (http://www.cs.sfu.ca/~ggbaker/personal/cf-linux) that CONFIG_SCSI_MULTI_LUN should be enabled on kernel (=Y) but current 34.0.2 doesn't have it enabled by default, is there any particular reason to not be enabled? By the other hand i've also tweak the /etc/grub.conf file to boot the

What is the "sg" device? The reason I ask, is that I have a file server running CentOS 4.2 on a Dell Precision 1650. Disks are attached via QLogic FC. I backup to a Qualstar TLS-4222 tape changer, with AIT-2 tapes, which is connected over an Adaptec 29160 Ultra 160 SCSI. The software I'm using is Legato Networker version 7.1.2. I'm backing up a bit under 1 TB a month

I need a SCSI card to attach a tape library to my system. I am looking at the Adaptec 29320A-R. Can anyone confirm that this card will work with the stock CentOS 4 kernel? -- Bowie

Hello Ron, sounds good. I have 2 tape changer. I persume, udev creates the same link for both. Can I modify SYMLINK+="changer-$env{ID_SERIAL}" The serial should be unique. Viele Gr??e Helmut Drodofsky Internet XS Service GmbH He?br?hlstra?e 15 70565 Stuttgart Gesch?ftsf?hrung Helmut Drodofsky HRB 21091 Stuttgart USt.ID: DE190582774 Fon: 0711 781941 0 <tel:+497117819410> Fax:

I have a Sony lib-162 tape library hooked up to an adaptec 39160 scsi controller. I''m running OpenSolaris / Indiana snv_98 with the CADP160 driver installed from a SXCE dvd (snv_99). When I boot without xvm, I can run "mt config" and see the configuration information for the first drive in the library. Under xvm, some scsi operations still work - I can access the changer, move

I updated my backup server to CentOS 6.6 this morning. As usual, I unmounted the current (nightly) tape from the changer before the reboot. Now Bacula complains it cannot access the changer: 3301 Issuing autochanger "loaded? drive 0" command. 3991 Bad autochanger "loaded? drive 0" command: ERR=Child exited with code 1. Results=cannot open SCSI device '/dev/changer' -

Hi All, I have a Quantum scalar i40 tape library. I need to configure it to TWO tape partition libraries, e.g., library_a and library_b, so that each library has its own tape drive. Then connect this physical tape library to two different CentOS servers so that each server can see its own media changer and tape drive. I once had a successful configuration on one host but NOT on the other. One

Hello, mtx and therefor amanda use generic device /dev/sg<x> for tape changer. These devices change on reboot. How to make them persistent? /dev/sch0 and /dev/sch1 seem to be persistent. /dev/tape/by-id/ shows links from WWID to generic device An UDEV rule could help? I have not found any example. -- Viele Gr??e Helmut Drodofsky Internet XS Service GmbH He?br?hlstra?e 15 70565

> Am 08.02.2019 um 00:13 schrieb Ron Loftin <reloftin at twcny.rr.com>: > > On Thu, 2019-02-07 at 22:29 +0100, Helmut Drodofsky wrote: >> Hello Ron, >> >> sounds good. I have 2 tape changer. I persume, udev creates the same >> link for both. >> >> Can I modify >> SYMLINK+="changer-$env{ID_SERIAL}" >> >> The serial

Hello all. I'm struggling to get Centos 4 to recognize my Dell Powervaul 132T tape changer. The system doesnt create a device node for it. [root at orion scotty]# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: SEAGATE Model: DAT DAT72-052 Rev: A060 Type: Sequential-Access ANSI SCSI revision: 03 Host: scsi1 Channel: 00 Id: 01 Lun:

Hello, After updating to 6.6 I've lost my connection to my tape library. Old log file (6.5): Sep 13 08:17:51 server1 kernel: scsi 1:2:0:0: Sequential-Access HP Ultrium 5-SCSI Z65W PQ: 0 ANSI: 6 Sep 13 08:17:51 server1 kernel: scsi 1:2:0:1: Medium Changer HP 1x8 G2 AUTOLDR 4.20 PQ: 0 ANSI: 5 New log file (6.6): Oct 28 18:15:06 server1 kernel: scsi1 : hpsa Oct 28 18:15:06

Salut Alex. En fait je me suis rendu compte de mon erreur à propos de "HSCROLL", ça marche correctement. La scrollbarre apparaît et fonctionne bien. La dernière fois j''ai eu l''impression qu''elle ne marchait pas, car cela peut arriver que la dernière lettre de la ligne de charactères qui s''affiche soit un peu coupée par la "VSCROLL".

Salut Alex. Peut tu me conseiller pour que je puisse renomer le processus et changer la priorité de mon application. merci. sebastien http://beusse.liveror.com/ _______________________________________________ wxruby-users mailing list wxruby-users@rubyforge.org http://rubyforge.org/mailman/listinfo/wxruby-users

Le 16/06/2017 ? 13:25, Yamaban a ?crit : > First, there are "preview" plugins for vim, you might want to look at > them first: > https://github.com/suan/vim-instant-markdown Hi, Thanks very much for your advice! This is a real life-changer for me. I had to fiddle a couple hours with Node.js and tweaking Vim until Markdown was handled correctly, but now I have a really nice

Hi, I''m curious about how you guys deal with big virtualization installations. To this date we only dealt with a small number of VM''s (~10)on not too big hardware (2xquad xeons+16GB ram). As I''m the "storage guy" I find it quite convenient to present to the dom0s one LUN per VM that makes live migration possible but without the cluster file system or cLVM

Hello, Are there any other other voice changer applications to Asterisk other than the one from Lobstertech? (http://lobstertech.com/voice_changer.html) Specifically interested in open-source but can have a look at economical commercial alternatives as well. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

I'm having speed problems with the SCSI card we're using to do tape backup. It seems to be functioning in 16 bit mode and the current thinking is that perhaps it's using a legacy driver instead of the correct one. The Adaptec site has a 'driver' for RHEL5 which I've downloaded and tried to install but it seems to have a problem installing on a CentOS-5 system. [root at