I have a strongswan vpn working 'almost' file. Its connects and traffic does pass but I have one problem. Shorewall:sfilter1:DROP:IN=enp3s7 OUT=enp3s7 MAC=00:02:b3:08:05:d2:00:18:fe:81:24:97:08:00 SRC=192.168.1.50 DST=192.168.1.165 The above was an attempt to browse via windows explorer over the VPN. Can someone point me to the correct documentation? Below is the relevant configurations. Thanks Vernon Interfaces: #ZONE INTERFACE BROADCAST OPTIONS net enp2s0 detect tcpflags,routefilter,nosmurfs,logmartians loc enp3s7 detect tcpflags,nosmurfs #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE Hosts: #ZONE HOST(S) OPTIONS vpn enp2s0:0.0.0.0/0 ipsec Tunnels #TYPE ZONE GATEWAY(S) GATEWAY # ZONE(S) ipsec net 0.0.0.0/0 vpn Policy: # VPN roadwarrior vpn $FW ACCEPT $FW vpn ACCEPT loc vpn ACCEPT vpn loc ACCEPT vpn net ACCEPT ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho