Hi, Thanks for this great piece of software! I'm trying to setup my network as follows: $FW machine is running shorewall and has two NICs, one (wlan1) connected to the internet through a router; the second (eth0) masquerading a subnet. I recently bought a VPN access (I use OpenVPN on interface tun0) and followed the multi-isp howto to set it up two provicers, 1 on wlan1 (fallback) and 2 on tun0 (balanced). What I am trying to achieve is to have the $FW and the subnet connected to eth0 use the main internet connection through wlan1, and no VPN. Only one specific user on the $FW (called rtorrent) would have instead all is traffic routed through the VPN (I'm marking his packages with "2" in tcrules). This is proving to be extremely tricky. I can route all the traffic from the firewall through wlan1 by default, and I can redirect traffic through the VPN binding application to the IP address of tun0. The specific user though, has no connection whatsoever when I activate the tcrule marking his packets... I am using USE_DEFAULT_RT=no and openvpn is pulling routing rules from the server, copying them in the main table. I attach a dump of my current configuration. Thank you! -- Marcello Giordano ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs