hello gentelmen
could somebody to share with me a working configuration, of course if
you have such one, for the following conditions:
i have:
1) a ppp0 interface (ADSL modem working as the bridge, connected to eth0
(broadcasting))
2) my local PC, all connection passes through (working as router)
3) on my local PC 3 additional interfaces are up: br0 - bridge
(192.168.0.1 - dhcp), vbox0 (obtains address from dhcp), eth1 - broadcatsing
in my local network i have a set of addresses which is connected to the
internet 192.168.0.223-192.168.0.254 -> eth1 -> br0 -> ppp0
and other, which are members of local network, but they should not be
connected to the internet.
questions are:
1) which zones should i set up first and how
2) which interfaces and how should they be defined
3) how to shape a traffic for my local PC (127.0.0.1) [full*3/4 -- full]
4) how to shape a traffic for machines in range
192.168.0.223-192.168.0.254 as [full/8 -- full/4]
5) how to turn the balance on for the traffic between those machines
6) how to turn the balance in for the traffic in local network area
7) how should i set up port forwarding if i need some
ps. sorry for bad english if any, i was drunk when i was writing this
email ))
thx
------------------------------------------------------------------------------
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H
