shyam kumar wrote:> hi sir
>
> i am new firewall configuration..
>
>
> i have configuration shorewall 4.0. i start the shorewall service my
> internet is not working
> i have assign the public ip from *eth0 for net* and eth1 assign *static
> ip address* for *DMZ* and eth2 assign *static ipaddress Local area*.
> after that i got error message in the log file .
> log file mention below.......
> i HAVE taken the ip from eth0:125.63.74.7
> subnet mask:255.255.255.0
> gateway:125.63.74.1
>
> eth1:192.168.1.222
> subnet mask:255.255.255.0
>
> eth1:192.168.10.223
> subnet mask:255.255.255.0
I''m assuming that the last should be eth2.
> PLz tell solution ??????????
>
> Oct 21 05:26:09 localhost kernel: ll header:
> ff:ff:ff:ff:ff:ff:00:19:d1:77:10:8d:08:00
> Oct 21 05:26:13 localhost kernel: printk: 2 messages suppressed.
> Oct 21 05:26:13 localhost kernel: martian source 192.168.1.18 from
192.168.1.6, on dev eth0
This means that eth0 is actually cabled to your DMZ. So either, you have
mis-cabled the network cards or you have eth0 and eth1 connected to the
same switch/hub.
If you have further problems, please submit your problem report as
described at http://www.shorewall.net/support.htm#Guidelines.
DO NOT SEND YOUR REPORT TO support@shorewall.net!!!!!!!!!!!!!!!!!!!
Thanks,
-Tom
--
Tom Eastep \ The ultimate result of shielding men from the
Shoreline, \ effects of folly is to fill the world with fools.
Washington, USA \ -Herbert Spencer
http://shorewall.net \________________________________________________
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer''s
challenge
Build the coolest Linux based applications with Moblin SDK & win great
prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/