Hi all,
I''ve got a network that has to be back up in less than 6 hours
(it''s
12:33am here)
Here''s my problem:
I have two rfc 1918 subnets on the same ethernet card:
LAN1 192.168.0.0/24
LAN2 192.168.1.0/24
I have two ISP''s:
WAN1 1.1.1.1/48 (768k)
WAN2 2.2.2.2/48 (1.5Mb)
I need the following:
LAN1 natted to WAN1
LAN2 natted to WAN2
The point of this exercise is to get my VOIP off onto fractional t1
by itself. Following the instructions for multiple ISPs results in a box
that can''t communicate with anything. I can get both subnets masqed to
a
single interface.
Anyone up who might want to work through this with me?
--
Michael Cozzi
cozzi@cozziconsulting.com
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
Michael Cozzi wrote:> Hi all, > > I''ve got a network that has to be back up in less than 6 hours (it''s > 12:33am here) > > Here''s my problem: > > I have two rfc 1918 subnets on the same ethernet card: > > LAN1 192.168.0.0/24 > LAN2 192.168.1.0/24 > > I have two ISP''s: > > WAN1 1.1.1.1/48 (768k) > WAN2 2.2.2.2/48 (1.5Mb) > > I need the following: > > LAN1 natted to WAN1 > LAN2 natted to WAN2 > > The point of this exercise is to get my VOIP off onto fractional t1 > by itself. Following the instructions for multiple ISPs results in a box > that can''t communicate with anything. I can get both subnets masqed to a > single interface. > > Anyone up who might want to work through this with me? >I''ll be up for a bit yet.... How do you have the providers file setup?? Jerry ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/
Jerry,
It looks like this:
TDS1 1 1 - eth1 134.215.238.201
TDS2 2 2 - eth3 134.215.230.225
Jerry Vonau wrote:> Michael Cozzi wrote:
>
>> Hi all,
>>
>> I''ve got a network that has to be back up in less than 6
hours (it''s
>> 12:33am here)
>>
>> Here''s my problem:
>>
>> I have two rfc 1918 subnets on the same ethernet card:
>>
>> LAN1 192.168.0.0/24
>> LAN2 192.168.1.0/24
>>
>> I have two ISP''s:
>>
>> WAN1 1.1.1.1/48 (768k)
>> WAN2 2.2.2.2/48 (1.5Mb)
>>
>> I need the following:
>>
>> LAN1 natted to WAN1
>> LAN2 natted to WAN2
>>
>> The point of this exercise is to get my VOIP off onto fractional t1
>> by itself. Following the instructions for multiple ISPs results in a
box
>> that can''t communicate with anything. I can get both subnets
masqed to a
>> single interface.
>>
>> Anyone up who might want to work through this with me?
>>
>>
>
> I''ll be up for a bit yet.... How do you have the providers file
setup??
>
>
> Jerry
>
>
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Shorewall-users mailing list
> Shorewall-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/shorewall-users
>
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
Michael Cozzi wrote:> Jerry, > > It looks like this: > > TDS1 1 1 - eth1 134.215.238.201 > TDS2 2 2 - eth3 134.215.230.225 > >Try: TDS1 1 1 main eth1 134.215.238.201 track,balance <locif> TDS2 2 2 main eth3 134.215.230.225 track,balance <locif> replace <locif> with the interface of your local lan. That should get you in the game, you''ll need to use route_rules or/and tcrules to define how you want your traffic flow. Jerry ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/
This causes the firewall to fail at startup. Jerry Vonau wrote:> Michael Cozzi wrote: > >> Jerry, >> >> It looks like this: >> >> TDS1 1 1 - eth1 134.215.238.201 >> TDS2 2 2 - eth3 134.215.230.225 >> >> >> > > Try: > > TDS1 1 1 main eth1 134.215.238.201 track,balance <locif> > TDS2 2 2 main eth3 134.215.230.225 track,balance <locif> > > replace <locif> with the interface of your local lan. > > That should get you in the game, you''ll need to use route_rules or/and > tcrules to define how you want your traffic flow. > > Jerry > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > Shorewall-users mailing list > Shorewall-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/shorewall-users >------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/
Michael Cozzi wrote:> This causes the firewall to fail at startup. >With what error message?? What did you change the providers file to? Jerry ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/