Dear ALL,
I ''m using shorewall 1.4.5 and two network card (eth0 and eth1). The
firewall setting is ok in LAN (etc. DHCP ,Webmin) (eth1) and Samba is running in
same server.
WAN side is ok (eth0). My workstation is Windows XP Home and get data from Samba
NT. If I start the shorewall , I can''t see the Samba. I read the log it
is samba can send the packet to 192.168.0.255.
What should I do?
my policy:
loc all ACCEPT
net all DROP
all all DROP
my rules:
ACCEPT net fw tcp 21
ACCEPT net fw icmp 8
I have try the way it say i shorewall home page add rto rules for open 137 and
139 tcp port. 137-138 udp port. 445 tcp and udp port.=20
I also try the sample proivde by shorewall Home Page too.But all not work.
Best Regards
ChungFrom teastep at shorewall.net Fri Jun 27 21:26:49 2003
From: teastep at shorewall.net (Tom Eastep)
Date: Fri Jun 27 20:26:55 2003
Subject: [Shorewall-users] SMB can''t connect when shorewall start
In-Reply-To: <000801c33d24$87ce7f40$0100a8c0@g4>
References: <000801c33d24$87ce7f40$0100a8c0@g4>
Message-ID: <oprrgjuzpwww1ebe@mail.shorewall.net>
On Sat, 28 Jun 2003 11:22:39 +0800, Chung <chungip@hkiworld.com> wrote:
> Dear ALL,
> I ''m using shorewall 1.4.5 and two network card (eth0 and eth1).
The
> firewall setting is ok in LAN (etc. DHCP ,Webmin) (eth1) and Samba is
> running in same server.
> WAN side is ok (eth0). My workstation is Windows XP Home and get data
> from Samba NT. If I start the shorewall , I can''t see the Samba. I
read
> the log it is samba can send the packet to 192.168.0.255.
> What should I do?
>
a) Install Shorewall as described at http://www.shorewall.net/two-
interface.htm
b) Read http://www.shorewall.net/samba.htm
-Tom
--
Tom Eastep \ Shorewall - iptables made easy
Shoreline, \ http://www.shorewall.net
Washington USA \ teastep@shorewall.net