I cannot access my server/firewall from my LAN with my current setup.
please help this newby!
I would like just the basic settings to enable this. Current setup is
Mandrake default. Wi;; RTFM l8r... i promise
SW Version:1.3.7c
Kernel:2.4.19-16mdk #1 Fri Sep 20 18:15:05 CEST 2002 i686 unknown
unknown GNU/Linux
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
2: eth0: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc pfifo_fast qlen
100
link/ether 00:20:18:2f:af:7c brd ff:ff:ff:ff:ff:ff
inet 10.0.0.10/24 brd 10.0.0.255 scope global eth0
3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100
link/ether 00:d0:b7:49:73:5e brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/24 brd 192.168.1.255 scope global eth1
4: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP> mtu 1492 qdisc pfifo_fast qlen
3
link/ppp
inet 203.51.177.156 peer 172.31.38.24/32 scope global ppp0
IP ROUTE
172.31.38.24 dev ppp0 proto kernel scope link src 203.51.177.156
10.0.0.0/24 dev eth0 scope link 192.168.1.0/24 dev eth1 scope link
127.0.0.0/8 dev lo scope link default via 172.31.38.24 dev ppp0