Andrew,
I''m a little confused about the topology -- do the two remote networks
connect to your firewall via a single interface or does each have its own
interface?
Perhaps some ASCII art is in order.
-Tom
----- Original Message -----
From: "Andrew Judge" <ajudge@telocity.com>
To: "Shorewall-Users" <shorewall-users@shorewall.net>
Sent: Thursday, March 07, 2002 12:46 PM
Subject: [Shorewall-users] Firewalling for WAN
> I have a two office WAN that is connected with a point to point T1. The
> networks are:
>
> A
> 192.168.1.0/24
> GW=192.168.1.254 (Linux with shorewall 1.8 masquerading both A and B
> internet with 2 NICs)
> router has IP 192.168.1.1
>
> B
> 192.168.2.0/24
> GW=192.168.1.254 (same as above)
> router has 192.168.2.1
>
> How should the interfaces and zones be setup? Can I use the loc zone to
> define both 192.168.1.0 and 192.168.2.0? Any tricks would help allot. I
> currently have network A setup and working, however, network B has
prolems.> Any help much appreciated.
>
> Best regards,
>
> Andy Judge
>
> _______________________________________________
> Shorewall-users mailing list
> Shorewall-users@shorewall.net
> http://www.shorewall.net/mailman/listinfo/shorewall-users
>