Displaying 5 results from an estimated 5 matches for "ztd_eth".
Did you mean:
mtk_eth
2007 Jul 06
2
Issue using zaptel's dynamic spans.
...is heard etc.. but, once the
drivers are loaded i cannot unload them. The ztd-eth kernel module fails to
unload. During development, i have no option but to reboot the machine every
now and then when, i change the span configuration :-s
Here are some details -
[root at somemachine ~]# modprobe -r ztd_eth
FATAL: Module ztd_eth is in use.
Looking at the list of zap related modules -
[root at somemachine ~]# lsmod |grep z
Module Size Used by
ztd_eth 5536 1
ztdynamic 9296 1 ztd_eth
zaptel 181028 2 ztdynamic,wctdm
crc_ccitt...
2005 Sep 13
1
TDMoE Configuration problems
...D-channel: 24
Status: Provisioned, Down, Active
Switchtype: Lucent 5E
Type: Network
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3
Current zaptel modules loaded:
ztd_eth 6660 0
ztdynamic 10452 1 ztd_eth
wct4xxp 104000 24
zaptel 223236 54 ztdynamic,wct4xxp
----
On the secondary machine
/etc/zaptel.conf:
dynamic=eth,eth1/00:30:48:76:27:5D,24,1
bchan=1-23
dchan=24
/etc/asterisk/zapata.conf:
under [channel...
2005 Feb 13
2
TDMOE + kernel badness
...ynamic spans between them, both boxes dump something similar to:
Badness in local_bh_enable at kernel/softirq.c:141
[<c0120768>] local_bh_enable+0x48/0x60
[<c02952b0>] dev_queue_xmit+0x230/0x240
[<c02a0980>] eth_header+0x0/0x140
[<f8f12301>] ztdeth_transmit+0x131/0x200 [ztd_eth]
[<f8ef17ff>] __ztdynamic_run+0x20f/0x240 [ztdynamic]
[<f8ef15e4>] ztd_tasklet+0x34/0x40 [ztdynamic]
[<c0120928>] tasklet_hi_action+0x38/0x70
[<c0120693>] __do_softirq+0x43/0xa0
[<c0120716>] do_softirq+0x26/0x30
[<c0108955>] do_IRQ+0xe5/0x120
[<c0106cd8...
2005 Sep 23
10
Problem setting up TDM22B card
Hi All,
I have the problem setting up TDM22B card.
Steps what I have followed are:
[1] compiled zaptel-1.0.9.2 & installed the same.
[2] modprobe wcfxo
/lib/modules/2.4.20-8/misc/wcfxo.o: init_module: No
such device
Hint: insmod errors can be caused by incorrect module
parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the
output from dmesg
2005 Sep 27
1
failed make install on Solaris 10
...can be caused by incorrect
> module
> > parameters, including
> > invalid IO or IRQ parameters.
> > You may find more information in syslog or
> the
> > output from dmesg
> > - wcte11xp
> > - wcusb
> > - ztd_eth
>
> It tries and fails to load many modules. This is
> expected, as you don't
> have their hardware.
>
> However can you load any zaptel module using
> modprobe?
> What's the output of: 'lsmod | grep zaptel'
>
> BTW: if you have a good idea of what s...