search for: yonder

Read the documentation on the meaning of the various 4.X tags, and am not sure what is meant by this: "The release branch for FreeBSD-4.6 and FreeBSD-4.6.2, used only for security advisories and other seriously critical fixes." Similar descriptions are used for the other RELENG_4_X tags. If I specify RELENG_4 will cvsup also include RELENG_4_3 to RELENG_4_8? Sorry folks - I'm

Hello. Can I use this video card with FreeBSD? If yes so, where I can driver download? Best regards, Vladimir Vasilenko <vladimir@shumbely.com>

Not sure if this is a bug or a feature, but it seems like potential security risk: I have a ufs fs mounted rw+nosuid, then I needed to downgrade it to ro, so I executed mount -u -r on it - imagine my surpise when I found that nosuid flag was removed as well. I know I could have used mount -u -r -o nosuid, but the present behavior seems to be non-obvious (update one flag, orthogonal flags dropped

I am a newbie to linux and shorewall. I am reading the shoreall quickstart guides. I am a bit confused about the following statement: ----------- quote -------------- The firewall has two network interfaces. Where Internet connectivity is through a cable or DSL "Modem", the External Interface will be the ethernet adapter that is connected to that "Modem" (e.g., eth0) unless you

Hello, I built apache+openssl+mod_ssl. It is working fine, and I have been starting the server with: apachectl startssl Recently, however, I have decided that I will not be doing anything over https (for a while, at least) with this web server, so for security reasons, I want to only run on port 80. So now I start the server with: apachectl start And it runs without SSL. My question is, is

heya i've been using freebsd's ipfw for quite a while and recently on a new server i've got this issue with ipfw that i can't understand ... something is wrong ... 01000 8042 1947866 allow ip from any to any via fxp0 01010 0 0 allow ip from any to any via lo0 01014 9886 4170269 divert 8668 ip from any to any in via vr0 01015 0 0 check-state 01130 14679 5695969 skipto 1800 ip from

Hello, I am missing any description of zaptel/DAHDI alarms. The TE200 series user manual contains only a description of LEDs states. These alarms states are visible in zttool/dahditool or in astersick CLI (zap show status) and I wonder what is the real meaning of these alarms for E1 channel. Possible alarm states (based on zaptel.h 1.2): 1. No alarms 2. Recovering from alarm 3. In loopback

...d for ffree. It is quicker. It is easier. It is rnore convenient. It is such a great choice for me and it is to shoppe for rneds at your store. Thank you for providing this nevv model for rned or-der. -Jane D. in NM stained with their red juice. Here was a barrow and yonder another.Then c ll one and the same in the whole dozen.It is most extraordinary good fortune."Years p ere digging the foundation; and the clerk has said it had no value except in being an old olumns of smoke rose into the still air; it was a heath fire,they told him- ho...

Hi, Annarchy needs more disk space fairly urgently, so I will take the host down and add some more disk space tomorrow, Saturday. Work will start approximately 17 UTC. I hope it will be fairly brief, less than an hour, but it might take longer if we run into problems Please get in touch on #freedesktop if you have any questions or if this is a problem for you. Regards, -- Tollef Fog Heen

I''ve set up shorewall with the two-interface mode. pc #1 eth1 ---> ppp0 ---> Internet eth1: 10.10.10.254 eth0: 10.10.10.1 > via a crossover cable pc #2 eth0: 10.10.10.2 (gateway=10.10.10.254) I am able to surf the net with pc #1, but pc #2 is completely cut off from pc #1 and the net. I am also unable to ping from and to pc #2.

...ons to do 6 or more channels on one of these chips, so I guess I'll get something similar doing verbs. Any advice? Also, I'm planning to do it without an OS, so I guess I can't use libvorbis (?) Yes, I know it's good for the soul to start from scratch anyway. This is wild-blue-yonder-stuff as far as I'm concerned, so a little shared experience would be much appreciated. -- andy --- >8 ---- List archives: http://www.xiph.org/archives/ Ogg project homepage: http://www.xiph.org/ogg/ To unsubscribe from this list, send a message to 'vorbis-request@xiph.org' cont...

...lied password. That password would ideally be the same as the one the user logs in with. So for me it's okay to place and enforce that requirement on any of the users. Having this in place would for sure reassure external auditors/accountants of any kind. Having Google'd from here to 'yonder and consulting experts on Experts Exhange, I have come up with only this pointer: http://dovecot.markmail.org/search/?q=dovecot+encrypt#query:dovecot%20encrypt+page:1+mid:khhe646k675x3yfd+state:results It mention the same issue, and also mentions the non-existence of a solution (back in May 2010)....

I'm constructing a Web server which may require restricted areas of the site to be used from public places where a password might be sniffed. The damage that could be done by taking snapshots of the content from one session with a spy program is minimal. What the owner of the server does NOT want, though, is to allow unauthorized parties to gain unfettered access by stealing the password via

Hi, I upgraded my 7.1-RELEASE system to RELENG_7 yesterday and after booting, re0 works for only a short time, then gives "re0: PHY read failed" over and over. Does anyone have a suggestion on how to debug? Thanks, Steve

Hi all! I have a slight problem: I have an external disk which contains one big filesystem (like a floppy) type ext3 (If you ask why: blame udev or maxtor, or me because I am stupid) which is approx 60% filled. Now I want to have a partition table, ie a layout where the current filesystem is the first partition, and the rest is as usual. Is this possible withotu destroying the data? Best

Hello -STABLE@, So I've seen this situation seemingly randomly on a number of both physical 9.1 boxes as well as VMs for I would say 6-9 months at least. I finally have a physical box here that reproduces it consistently that I can reboot easily (ie; not a production/client server). No matter what I do: reboot shutdown -p shutdown -r This specific server will stop at "All buffers

I have a FreeBSD box acting as a firewall and NAT gateway I would like to set it up to transparently pass IPSec packets -- I have an IPSec VPN client running on another machine, connecting to a remote network. Is there a way to do this? I can't find any hints in the man pages.

Hi! Im running FreeBSD 9.1 on a AMD APU machine: CPU: AMD E-450 APU with Radeon(tm) HD Graphics (1699.36-MHz K8-class CPU) FreeBSD 9.1-RELEASE-p1 #0 r243379M: Fri Mar 8 23:16:44 CET 2013 root at pean.org:/usr/obj/usr/src/sys/GENERIC I try to use amdtemp(4) to read the temperature of this CPU but it doesnt seem to detect the CPU. The manual states that it should support K8-class. The

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello Everyone, On October 31st, FreeBSD 5.3 and FreeBSD 5.4 will have reached their End of Life and will no longer be supported by the FreeBSD Security Team. Users of either of those FreeBSD releases are strongly encouraged to upgrade to FreeBSD 5.5 or FreeBSD 6.1 before that date. In addition, the FreeBSD 6.0 End of Life is presently scheduled

Dear FreeBSD users and system administrators, While the FreeBSD Security Team has traditionally been very good at investigating and responding to security issues in FreeBSD, this only solves half of the security problem: Unless users and administrators of FreeBSD systems apply the security patches provided, the advisories issued accomplish little beyond alerting potential attackers to the