search for: xenus

The marilith boxes use a conserver (http://www.conserver.com/) setup for serial access. Our installation exports the logs via http allowing us to grab them with wget. Sending debug keys with is handled separately via xenuse. xenuse ultimately speaks to the conserver too but it abstracts away the IP and port to use so this is preferred. With these changes the correct Serial hostprop for a marilith box is: xenuse;http http://conserver.uk.xensource.com/consoles/

Hi, I've got a 3ware 9550SX-4LP on a dual xeon 3.6GHz machine (no HVM possible). 4 SATA-HDs in RAID 5 installed. xen 3.0.3 with centos-4.4 as xen0. centos-4.4 is also installed on the numerous xenUs. The xenUs are installed in LVs which are formatted as xfs. Now I'd like to move over to centos 5.0 This is what I thought to be good as an upgrade procedure: 1) install a xen0 to a (bootable) USB hard disk this allows me to go back to my old configuration as soon as I encounter irresolva...

It appears that we have a build dependency on 32-bit headers which isn''t checked during ./configure, leading to strange-looking error: ---- snip ---- make -C tcgbios all make[10]: Entering directory `/home/xenuser/hg/xen-unstable.hg/tools/firmware/rombios/32bit/tcgbios'' gcc -O1 -fno-omit-frame-pointer -m32 -march=i686 -g -fno-strict-aliasing -std=gnu99 -Wall -Wstrict-prototypes -Wdeclaration-after-statement -Wno-unused-but-set-variable -D__XEN_TOOLS__ -MMD -MF .tcgbios.o.d -D_LARGEFILE_SOUR...

Hi, I am a newb to XCP and somewhat to Linux. I set up XCP on a test machine and used xe to configure a couple of VMs. The VMs are working fine but if I deploy XCP with only xe to manage machines, the others here will want my head on a plate. I set up a Fedora client on a different machine and installed Virtual Machine Manager. When trying to connect via SSH, I get an error that says

Hi List, I don''t know if this is something that is a simple matter of opinion or if there are strong reasons to take one route or the other. I have dom0 nodes with dedicated bond interfaces that connect to a storage traffic-only VLAN. Currently I have a few domUs running that have large-ish volumes on the iSCSI SAN, and to present the volumes I''m connecting the dom0s to the

...error for vlan interfaces. /etc/xen/script/network-bridge start netdev=eth0 /etc/xen/script/network-bridge start netdev=eth0.100 /etc/xen/script/network-bridge start netdev=eth0.101 Then we use brctl show, we can see eth0.100 and eth0.101 bridges is start up. Then we start 4 xenU, 2 xenUs on each bridges. But questions is that: I can''t get the 8021q packages with ethereal tool. I doubt that I don''t setup the vlans successfully. And xenU in the vlans can''t connect the outside by using ping address. Is anybody know about this? Best Regards --Li -- Be...

Hi all I am looking to solve a problem regarding a virtual serial device, I would like to create an array of virtual serial devices in dom0 (/dev/virtualcom[1-U]?) that i could attach one to each of domU''s in a kind of serial device "bridge" or virtual null-modem between them. The goal is to get functionality that would enable me to f.ex. use screen in dom0 on a device: #

Hallo xenusers, I search a simple variant to generate CPU,Load for MRTG. Actually I use following configuration. But I see CPU-usage of xen0 only, not a summary of all VM. - net-snmp does not support xen [1]. - dtc-xen [2] show CPU-usage from each VM, but not summary. This view is confusing. [3] For monit...

Hi    We are very pleased to announce immediate availability of ConVirt 2.0 Beta!  Built on a brand new, 3-tier, repository-based architecture, ConVirt 2.0 incorporates many of our users’ most wanted and anticipated features. For more information, please visit us at    http://www.convirture.com/blog/2009/announcements/convirt-2-0-beta-now-available/ ConVirt Team.

Hi    We are extremely happy to announce ConVirt 1.1 release. For details please visit : http://www.convirture.com/blog/2009/announcements/convirt-11-is-now-available/ ConVirt Team. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi, I''m runing a Fedora Core 6 on a Power Edge with Xeon Cranford that I planning to running Windows as a guest S.O. and reading "Fedora Xen Quickstar FC6" as document to install Xen on this server. This document recomend a "grep vmx /proc/cpuinfo" test to verify if computer is Intel VT supported. Running this command I don''t find any information about vmx.

Starting a new Xen setup, with off-the-shelf Wheezy, and the standard Xen packages, which turn out to be Xen 4.1 I used to just put a (network-script network-bridge) in the Xen setup, but I guess you can''t do that anymore... There are a variety of recipes to setup the network and bridging, since apparently the Xen setup doesn''t does this for you anymore. I''ve gone

nic@wuwei:/usr/src/xen/xen-unstable.hg$ sudo xm create breezy -c Using config file "/etc/xen/breezy". Started domain breezy Linux version 2.6.12-xenU (nic@wuwei) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #3 SMP Thu Oct 13 14:56:20 NZDT 2005 kernel direct mapping tables upto 10000000 @ 568000-5ea000 Built 1 zonelists Kernel command line: root=/dev/sda1 ro 4 lockd.udpport=32768

Hi all- I''m hoping someone can help me with this problem with Xen under CentOS 5.1 (RHEL 5.1) I''m having... This is the Xen package that comes stock with the distribution, I didn''t compile it from source. I can boot Domain0 and the hypervisor just fine. I''m trying to bring up a Xen guest VM and it crashes on boot, with this error: # xm create -c tcga1

We found that cs 11554 increases some of timeout to fix the hot plug issue when starting 4 VMX simultaneously. Thanks for the quick reponse to nightly status report. But we found that when in an extremely condition, like creating 12 VMX domains and 4 XENU domains at the same time, sometimes we still can meet this bug. Attached is a demo script to start many domains. So we just wonder

...up guest. 3. Assign one VMX with 0 vcpu will not boot up guest. The passed cases include: 1. xm console pass in all conditions. (1) xm console pass when create one xenU (2) xm console pass when create one VMX (3) xm console pass when create two VMXs. (4) xm console pass when create two xenUs. (5) xm console pass when create one VMX and one xenU. 2. xm vcpu-pin works in all conditions. (1) xm vcpu-pin works for one VMX domain (2) pin 1 cpu to 2 VMX domains. (3) pin 2 cpus to 1 VMX domain. (4) pin 2 cpus to 2 domU domains. (5) pin 8 cpus to 1 VMX domain 3. Check if assi...

Ever since xen-unstable cset 14308 ("pci back: Fix registration of of filters on subsections of config space") I''ve been getting an MCA on the *2nd* boot of a driver domain using an e1000 NIC. Cset 14308 allowed the proper setup of the PM control registers, so the NIC is put in the D3 power state when the driver domain shuts down. Unfortunately, pci_set_power_state()

Hi, I am considering the following setup: dom0 for normal, direct connection to the internet, use, and dom1 to be used when some one needs to connect to work through a VPN. Both domains will be running GNU/Linux with xen-modified kernels. I can''t use VNC to access dom1''s X server as it relies on an open network connection from dom1 to dom0: as soon as dom1 connects via the VPN,

I see it is currently in beta, anyone know when the production release is scheduled for? _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

I saw a few people mentioning they were running or trying to run asterisk on Xen. Last night I checked out v1-0, compiled, ran "make install; make samples", then started asterisk with "asterisk -vvvvc". Several modules refused to load giving this error: [chan_sip.so]May 22 13:48:41 WARNING[4308]: loader.c:258 ast_load_resource: /usr/lib/asterisk/modules/chan_sip.so: