search for: xdev

...omain, unsigned int bus) { struct pci_bus *b; struct pcifront_sd *sd = NULL; - struct pci_bus_entry *bus_entry = NULL; + LIST_HEAD(resources); int err = 0; #ifndef CONFIG_PCI_DOMAINS @@ -463,16 +471,18 @@ static int pcifront_scan_root(struct pcifront_device *pdev, dev_info(&pdev->xdev->dev, "Creating PCI Frontend Bus %04x:%02x\n", domain, bus); - bus_entry = kmalloc(sizeof(*bus_entry), GFP_KERNEL); - sd = kmalloc(sizeof(*sd), GFP_KERNEL); - if (!bus_entry || !sd) { + sd = kzalloc(sizeof(*sd), GFP_KERNEL); + if (!sd) { err = -ENOMEM; goto err_out; } p...

...omain, unsigned int bus) { struct pci_bus *b; struct pcifront_sd *sd = NULL; - struct pci_bus_entry *bus_entry = NULL; + LIST_HEAD(resources); int err = 0; #ifndef CONFIG_PCI_DOMAINS @@ -463,16 +471,18 @@ static int pcifront_scan_root(struct pcifront_device *pdev, dev_info(&pdev->xdev->dev, "Creating PCI Frontend Bus %04x:%02x\n", domain, bus); - bus_entry = kmalloc(sizeof(*bus_entry), GFP_KERNEL); - sd = kmalloc(sizeof(*sd), GFP_KERNEL); - if (!bus_entry || !sd) { + sd = kzalloc(sizeof(*sd), GFP_KERNEL); + if (!sd) { err = -ENOMEM; goto err_out; } p...

...omain, unsigned int bus) { struct pci_bus *b; struct pcifront_sd *sd = NULL; - struct pci_bus_entry *bus_entry = NULL; + LIST_HEAD(resources); int err = 0; #ifndef CONFIG_PCI_DOMAINS @@ -463,16 +471,18 @@ static int pcifront_scan_root(struct pcifront_device *pdev, dev_info(&pdev->xdev->dev, "Creating PCI Frontend Bus %04x:%02x\n", domain, bus); - bus_entry = kmalloc(sizeof(*bus_entry), GFP_KERNEL); - sd = kmalloc(sizeof(*sd), GFP_KERNEL); - if (!bus_entry || !sd) { + sd = kzalloc(sizeof(*sd), GFP_KERNEL); + if (!sd) { err = -ENOMEM; goto err_out; } p...

Using samba 4.0.9 as an AD DC (no other domain servers). Since my UIDs and GIDs have changed, I was doing cleanup: find /srv/svn/ -xdev '(' -nouser -o -nogroup ')' -ls I noticed this was very slow -- iostat reported only about 2tps and 50kB/s to my disks. So I timed it with nsswitch.conf users & groups set to "files" vs. "files winbind": # with "files" root at gumbo:~# ti...

The attached patches allow the pciback module to perform a reset whenever a PCI device is: - attached to the pciback module, as so: echo "0000:01.07.0" > /sys/bus/pci/devices/pciback/bind - detached from the pciback module, as so: echo "0000:01.07.0" > /sys/bus/pci/devices/pciback/unbind - and when the guest is done with (internally when the guest is not using

First, maintainer''s addresses (Ryan Wilson <hap9@epoch.ncsc.mil>, Chris Bookholt <hap10@epoch.ncsc.mil>) are wrong (users unknown to remote mailsystem), so posting to you: PCI bus format strings are wrong. "%04x:%02x:%02x.%d" should be used instead of "%04x:%02x:%02x.%1x" (in many places of linux+v3.2.1/drivers/xen/xen-pciback/pci_stub.c) --

...l/usr - /zfsroot/usr zfs - yes - datapool/var - /zfsroot/var zfs - yes - datapool/opt - /zfsroot/opt zfs - yes - datapool/home - /zfsroot/export/home zfs - yes - /dev/zvol/dsk/datapool/swap - - swap - no - cd / ; find . -xdev -depth -print | cpio -pvdm /zfsroot cd / ; find usr -xdev -depth -print | cpio -pvdm /zfsroot cd / ; find var -xdev -depth -print | cpio -pvdm /zfsroot cd / ; find opt -xdev -depth -print | cpio -pvdm /zfsroot cd / ; find export/home -xdev -depth -print | cpio -pvdm /zfsroot # ran this script: htt...

...accommodation, however as more arrangements are made, all this information will be made available. Again, thanks to all who are offering their assistance, I look forwards to hearing from you, and all being well meeting you soon. Cheers, Ben -----Original Message----- From: asterisk-uk-bounces@xdev.net [mailto:asterisk-uk-bounces@xdev.net] On Behalf Of Michael J. Tubby B.Sc (Hons) G8TIC Sent: 22 March 2005 15:31 To: Asterisk UK Community mailing list Cc: Simon Clifton Subject: Re: [Asterisk-uk] Meet ----- Original Message ----- From: "Peter Bowyer" <peeebeee@gmail.com> To:...

When parsing "xdev"-kind devices, do not assume that the partition number can be converted to integer: re_xdev accepts an empty part of the partition number, so just handle as it is, as string. This fixes a regression due to the conversion of the inspection code to OCaml, as the old C version did not have this...

...on a second harddisk: On this disk "du" and "df" both reported a size of about 4 GB, and not 7.6G, which is completely off the mark. # df -h / Filesystem Size Used Avail Use% Mounted on /dev/sda1 7.6G 7.0G 216M 98% / # du -shx / 4.2G / # find / -xdev | wc -l 161021 # tune2fs -l /dev/sda1 tune2fs 1.35 (28-Feb-2004) Filesystem volume name: <none> Last mounted on: <not available> Filesystem UUID: a3f40d6f-51be-448b-bf71-76292772fea0 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem fe...

...of / that contained any significant data. There sum of the sizes of all of the directories at the top level of / reported by du did not match the amount of disk space used at the time of the problem. I don't have a transcript of that session but I was using commands like: find / -maxdepth 1 -xdev -type d | while read; do du -shx $d; done I poked around in /var and /tmp a lot but didn't find anything that would contradict the output of the previous command. At this point I started searching for deleted files for which the space had not been reclaimed. Finding nothing I though there was...

...is 137.93 lion:/homes/atg/ ========= Tue Aug 22 12:47:48 CEST 2006 ================== 1232323 files / 1960 sec = 629 files/sec In comparison, on the large filesystem, 'find'ing all files on the source system and 'stat'ing them takes 1.75 minutes: source# time find /homes -xdev -print0 | xargs -0 stat -c "%s %Y" | wc -l 1232287 real 1m41.987s user 0m7.075s sys 0m33.216s On the destination 4 minutes: dest# time find /backup/lion-homes -xdev -print0 | xargs -0 stat -c "%s %Y" | wc -l 1233202 real 4m3.650s user 0m9.895s...

From: Jiang Liu <jiang.liu at huawei.com> This patch tries to deprecate usage of pci_scan_bus_parented(). It applies to https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git next Jiang Liu (3): PCI: export three functions to support modular host bridge driver PCI, xen-pcifront: use new PCI interfaces to simplify implementation PCI: mark pci_scan_bus_parented() as

From: Jiang Liu <jiang.liu at huawei.com> This patch tries to deprecate usage of pci_scan_bus_parented(). It applies to https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git next Jiang Liu (3): PCI: export three functions to support modular host bridge driver PCI, xen-pcifront: use new PCI interfaces to simplify implementation PCI: mark pci_scan_bus_parented() as

From: Jiang Liu <jiang.liu at huawei.com> This patch tries to deprecate usage of pci_scan_bus_parented(). It applies to https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git next Jiang Liu (3): PCI: export three functions to support modular host bridge driver PCI, xen-pcifront: use new PCI interfaces to simplify implementation PCI: mark pci_scan_bus_parented() as

From: Jiang Liu <jiang.liu at huawei.com> This patch tries to deprecate usage of pci_scan_bus_parented(). It applies to https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git next V2: Kill pci_scan_bus_parented() instead of marking it as deprecated Jiang Liu (3): PCI: export three functions to support modular host bridge driver PCI, xen-pcifront: use new PCI interfaces to

From: Jiang Liu <jiang.liu at huawei.com> This patch tries to deprecate usage of pci_scan_bus_parented(). It applies to https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git next V2: Kill pci_scan_bus_parented() instead of marking it as deprecated Jiang Liu (3): PCI: export three functions to support modular host bridge driver PCI, xen-pcifront: use new PCI interfaces to

From: Jiang Liu <jiang.liu at huawei.com> This patch tries to deprecate usage of pci_scan_bus_parented(). It applies to https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git next V2: Kill pci_scan_bus_parented() instead of marking it as deprecated Jiang Liu (3): PCI: export three functions to support modular host bridge driver PCI, xen-pcifront: use new PCI interfaces to

Hello everyone - Update: Many thanks to Matt Miller for the tip on usermod options. That worked very well! I did not know those options existed and would never have thought to look for them. After making and testing backups, I started with my main workstation. Rebooted in runmode=3, then ran the usermod -u and -g options. I did this in two runs. I first had to uninstall docker since it

Hi, This patch series fixes the S3 resume of a domain running xenstored and a frontend over xenbus (xen-netfront in my use case). As device resume is happening before process resume, the xenbus frontend resume is hanging if xenstored is not running, thus causing a deadlock. This patch series is fixing that issue by deferring the xenbus frontend resume when we are running xenstored in that same