search for: x79

Hi Guys, In a bit of a pickle.. Is anyone running the latest "Centos 5.9" or earlier version with an Intel X79 based motherboard. I have a server which needs the motherboard replacing asap and I have a spare "Sabertooth X79". I have a machine with a "Sabertooth X79" motherboard to test on which boots up fine on on "Centos 5.9 i386" image from the troubled server. However th...

https://bugs.freedesktop.org/show_bug.cgi?id=102234 Bug ID: 102234 Summary: x79 Product: xorg Version: 7.7 (2012.06) Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: major Priority: medium Component: Driver/nouveau Assignee: nouveau at lists.freedesktop.org...

I am having problems getting my 64-bit Debian Squeeze (Xen version 4.0, Linux Kernel 2.6.32) dom0 to recognize a harddrive connected to a secondary sata controller. My motherboard is a Gigabyte GA-X79-UP4 and has two sata controllers. The first is controlled by an Intel X79 chipset and the second is controlled by a Marvell 88SE9172 chip. During the initial install of Debian everything is fine and I can see harddrives attached to either controller. If I boot Xen from grub, I cannot see the harddr...

...t; controller, and I???d recommend you turn that off and use software RAID > > in the future. Yes, it is a "fake" raid Controller bat is not possible to found the drives in Raid Mode or AHCI Mode ? This Board have 2 Controller!? 00:1f.2 RAID bus controller: Intel Corporation C600/X79 series chipset SATA RAID Controller (rev 06) On this controller all drives are found and it is possible to create a Raid1! 07:00.0 Serial Attached SCSI controller: Intel Corporation C602 chipset 4-Port SATA Storage Control Unit (rev 06) But on this Contoller NO drives found? there are 4 drive...

...x29 + x30 + x31 + x32 + x33 + x34 + x35 + x36 + x37 + x38 + x39 + x40 + x41 + x42 + x43 + x44 + x45 + x46 + x47 + x48 + x49 + x50 + x51 + x52 + x53 + x54 + x55 + x56 + x57 + x58 + x59 + x60 + x61 + x62 + x63 + x64 + x65 + x66 + x67 + x68 + x69 + x70 + x71 + x72 + x73 + x74 + x75 + x76 + x77 + x78 + x79 + x80) it gives me an error "Error in eval(expr, envir, enclos) : object 'x3' not found" which I dont know why I am given those errors. The other thing is that when I use the "glm.fit", I can get coefficients without any errors. So, I am not sure what is going on and if...

...S is nowhere to be seen. $ lspci -nn | grep 02:00 02:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:1401] (rev a1) 02:00.1 Audio device [0403]: NVIDIA Corporation Device [10de:0fba] (rev a1) $ lspci -nn | egrep 00:1[a,d] 00:1a.0 USB controller [0c03]: Intel Corporation C600/X79 series chipset USB2 Enhanced Host Controller #2 [8086:1d2d] (rev 06) 00:1d.0 USB controller [0c03]: Intel Corporation C600/X79 series chipset USB2 Enhanced Host Controller #1 [8086:1d26] (rev 06) Do you have any additional pointers for me on how to properly pass the GPU through so the guest OS det...

00:1f.2 SATA controller: Intel Corporation C600/X79 series chipset 6-Port SATA AHCI Controller (rev 06) While I don?t have experience with this exact controller, I have seen some LSI controllers get removed from RHEL post GA which causes similar issues. ?It worked when I installed, but after `yum update` my box doesn?t boot.? These are typically de...

Hello, Am Donnerstag, 3. Oktober 2019, 01:10:58 CEST schrieb Akemi Yagi: > On Wed, Oct 2, 2019 at 3:35 PM G?nther J. Niederwimmer <gjn at gjn.priv.at> wrote: > > This Board have 2 Controller!? > > 00:1f.2 RAID bus controller: Intel Corporation C600/X79 series chipset > > SATA > > RAID Controller (rev 06) > > > > On this controller all drives are found and it is possible to create a > > Raid1! > > > > 07:00.0 Serial Attached SCSI controller: Intel Corporation C602 chipset > > 4-Port SATA Storage Co...

On Wed, Oct 2, 2019 at 4:10 PM Akemi Yagi <amyagi at gmail.com> wrote: > > On Wed, Oct 2, 2019 at 3:35 PM G?nther J. Niederwimmer <gjn at gjn.priv.at> wrote: > > > > > This Board have 2 Controller!? > > 00:1f.2 RAID bus controller: Intel Corporation C600/X79 series chipset SATA > > RAID Controller (rev 06) > > > > On this controller all drives are found and it is possible to create a Raid1! > > > > 07:00.0 Serial Attached SCSI controller: Intel Corporation C602 chipset 4-Port > > SATA Storage Control Unit (rev 06) &g...

I should also mention that Accounting rules are not stateful -- each rule only handles traffic in one direction. So for example, if eth0 is your internet interface and you have a web server in your DMZ connected to eth1 then to measure HTTP traffic in both directions requires two rules: DONE eth0 eth1 tcp 80 DONE eth1 eth0 tcp - 80 Associating a counter with a chain allows for aggregation.

...://bugs.freedesktop.org/attachment.cgi?id=133530&action=edit lspci pstate 07 0f, vbios.rom nouveau, gtx770bios.rom from my gtx770 card Hello, Pcie link speed is gen2 instead of gen3 Kernel version: 4.10.0 (same situation with kern 4.9, 4.11, 4.13-rcx, 4.12 no tested/remember) My motherboard: x79 with 2 slot pci express 3 support My graphic card: nvidia (msi) gtx 770 4 gb ddr5 oc edition twin frozr (2x fan) Xorg: 7.7+19 Nouveau: xserver-xorg-video-nouveau 1.0.13-3 libdrm-nouveau2 2.4.74-1 Dmesg (i compiled kernel with nouveau debug level 4 so very much info (clk, fan etc), i pick just...

...I switch from sa-learn to the lightning-fast spamc training variant. TIA guenther [1] Yes, I know, sorry. Don't want to change everything at the same time, and the target system I'm experimenting for runs that version, too. -- char *t="\10pse\0r\0dtu\0. at ghno\x4e\xc8\x79\xf4\xab\x51\x8a\x10\xf4\xf4\xc4"; main(){ char h,m=h=*t++,*x=t+2*h,c,i,l=*x,s=0; for (i=0;i<l;i++){ i%8? c<<=1: (c=*++x); c&128 && (s+=h); if (!(h>>=1)||!t[s+h]){ putchar(t[s]);h=m;s=0; }}}

...Also... Thanks for this great IMAP server! I migrated many moons ago, beginning with some 0.9x version I don't exactly recall, and it just works. Migration has been a smooth experience too, and I haven't had any issue yet. guenther -- char *t="\10pse\0r\0dtu\0. at ghno\x4e\xc8\x79\xf4\xab\x51\x8a\x10\xf4\xf4\xc4"; main(){ char h,m=h=*t++,*x=t+2*h,c,i,l=*x,s=0; for (i=0;i<l;i++){ i%8? c<<=1: (c=*++x); c&128 && (s+=h); if (!(h>>=1)||!t[s+h]){ putchar(t[s]);h=m;s=0; }}}

...quot;,"X61","X62","X63","X64","X65","X66","X67","X68","X69","X70","X71","X72","X73","X74","X75","X76","X77","X78","X79","X80","X81","X82","X83","X84","X85","X86","X87","X88","X89","X90","X91","X92","X93","X94","X95","X96","X97",&quot...

I have two RHEL4 email servers running postfix/MailScanner which use dovecot. They work great. But during bootup the nfslock script in my init.d loads rpc.statd and calls portmap to get a port number. Portmap keeps giving rpc.statd the imaps port number (993). I then have to stop my mail server services, manually start dovecot, then restart the mail server services and everything goes merrily on

...1,X77) Guilda3<-cbind(X22,X28,X69) Guilda4<-cbind(X29,X30,X31,X32,X33,X34,X35,X36,X37,X78) Guilda5<-cbind(X3,X8,X18,X23,X63,X82,X83) Guilda6<-cbind(X6,X38,X39,X44,X45,X46,X47,X49,X50,X51,X52,X53,X54,X55,X56,X57,X58,X59,X60,X61,X62,X84) Guilda7<-cbind(X1,X2,X42,X43,X64,X65,X66,X67,X68,X79,X80) Guilda8<-cbind(X7,X15,X16,X70,X71,X72,X73,X74,X75,X76) Guilda9<-cbind(X4,X9,X10,X11,X12,X13,X14,X81) Resul.Guilda1<-sum(apply(Guilda1,2,sum)) Resul.Guilda2<-sum(apply(Guilda2,2,sum)) Resul.Guilda3<-sum(apply(Guilda3,2,sum)) Resul.Guilda4<-sum(apply(Guilda4,2,sum)) Resul.Guild...

...X61" > ,"X62","X63","X64","X65","X66","X67","X68","X69","X70","X71" > ,"X72","X73","X74","X75","X76","X77","X78","X79","X80","X81" > ,"X82","X83","X84","X85","X86","X87","X88","X89","X90","X91" > ,"X92","X93","X94","X95","X96","X97...

...uot; "X62" "X63" "X64" "X65" "X66" "X67" "X68" "X69" "X70" "X71" "X72" "X73" "X74" "X75" "X76" "X77" "X78" "X79" "X80" [81] "X81" "X82" "X83" "X84" "X85" "X86" "X87" "X88" "X89" "X90" "X91" "X92" "X93" "X94" "X95" "X96"...

Hello, I have looked on https://www.r-project.org/bugs.html , but it seems that this is the only way to do it. The issue is that the precision used by write.csv is on consistant for big files. See the following code: First I create a large dataframe filled with random uniform values. Then I write it to .csv and print out the first and last lines. df = data.frame(replicate(100, runif(1000000,

...2 +X3+X4+X5+X6+X7+X8+X9+X10+X11+X12+X13+X14+X15+X16+X17+X18+X19+X20+X21+X22+X23+X24+X25+X26+X27+X28+X29+X30+X31+X32+X33+X34+X35+X36+X37+X38+X39+X40+X41+X42+X43+X44+X45+X46+X47+X48+X49+X50+X51+X52+X53+X54+X55+X56+X57+X58+X59+X60+X61+X62+X63+X64+X65+X66+X67+X68+X69+X70+X71+X72+X73+X74+X75+X76+X77+X78+X79+X80+X81+X82+X83+X84+X85+X86+X87+X88+X89+X90+X91+X92+X93+X94+X95+X96+X97+X98+X99+X100+X101+X102+X103+X104+X105+X106+X107+X108+X109+X110+X111+X112+X113+X114+X115+X116+X117+X118+X119+X120+X121+X122+X123+X124+X125+X126+X127+X128+X129+X130+X131+X132+X133+X134+X135+X136+X137+X138+X139+X140+X141+X142+X143...