search for: wlans

Hi all, let me see if I can explain my problem in an explicable way. I have written a WLAN driver which runs on a dedicated box (e.g. not a PCMCIA card). The box is plugged into a client that wants WLAN connectivity via Ethernet. E.g.: [ ] Ethernet [ ] RF/WLAN [ Laptop ]------------------[ WLAN adapter ]------------- [ ] [ ]

Hallo, can I use pxelinux for booting a notebook via WLAN? Viele Gruesse! Helmut

Hi! I have some problems with an bridge between wlan0 and eth0 device... It works and I can from both sides ping the router with the bridge device but I cant ping the devices from other net so I cant ping wlan devs from eth net and other way around the wlan card is an atmel usbw11 from linksys and eth is a intel e100 10/100mbit nic I have configured the bridge according to the how to and

tinc 1.0.19 worked fine on Raspberry Pi as long as my Pi was connected via ethernet cable. Today i changed the connection to wlan. Pi crashed. worse, it was no longer operational, even if connected via cable. recovery from backup before tinc was installed (yes, i had a backup ;) tried again. installed tinc: worked as long as connected via cable. crash after connecting via wlan. no longer

Hi list, I bought two UTStarcom F1000 phones, pre-equipped with the latest firmware, including WPA support. Those are configured to register to an asterisk server on the internet (not LAN), and registration works. Calling and being called also, with transfer and all bells and whistles. After a few minutes up to 5 hours (varies widely), the display tells me that an Accesspoint is not available

Well I think we all need to look at something like this first. We will be one of the first people in Europe who will be selling this. If anyone is interested do drop me an email. Picture of the phone can be found here. http://cyber-telecom.net/wifi-gsm.jpg GSM / VoIP Over WiFi Dual-Mode Phone CYBER-TELECOM released the world first commercial GSM/VoIP Over WiFi dual-mode smart phone, in

I intend to realize the connection to the Internet by WLAN (at the presen time DSL cable modem). The WLAN DSL-Router should not be the problem. But which wlan- adapter (internally (PCI), USB... whatever) can be recommended for a work "out of is the box" with cent OS 5? Thx Timothy

Hello, is anyone on the list using a normal cell/mobile phone which is able to act as a SIP client over WLAN? Or has anyone heard of a SIP client for cell/mobile phones running windows mobile 6.x? The phone should use SIP, when the asterisk server is reachable and should automatically switch to a German telco if it is not reachable. Thanks for any hints, Stefan --

Hi All, After hours of reading and trials, I got the following setup working... 1. Dell Axim X30 PocketPC with 802.11b wireless using DHCP with Open WEP -- successfully connected to --> 2. Laptop with DLink Airplus DWL-650+ PCMCIA wireless with ndiswrapper v1.1 driver with network bridge (wired + wireless) and running a DHCP server listening on interface br0 (eth0 + wlan0) Here is the

Dear list-members! I am using OpenWRT (www.openwrt.org) on two accesspoints. Within OpenWRT, the wireless interface and the ethernet interface are bridged to one interface (br0). Those two accesspoints are standing quite far from one another. Their WLAN-cells do not cross each other, meaning I have an area in between the two accesspoints, where there is no accesspoint of the two accessible: a

hi list members, my goal is to make one of my DomU''s act as a wireless accesspoint... So, i need it to have access to the pcmcia wlan card attached to dom0. But how ? when i give the pci=[] option to the domU config file its shows up with lspci but i cant use it... (on debian with module-assistent get rt2x00 in de DomU) Is it possible or would it be better to use a more direct interface

Hi, i want to ask about sip.conf & extension.conf the configuration. is it possibility to make sip.conf configuration like this [1510891531543268 at wlan.mnc089.mcc510.3gppnetwork.org] type = friend context = tutorial username = 1510891531543268 at wlan.mnc089.mcc510.3gppnetwork.org secret = 12345 host = dynamic and the extension.conf like this exten => 1510891531557268 at

I have a Broadcom 802.11b/g hardware on my dual-boot laptop. Note first that in the WinXP partition, the wifi makes DHCP connections to my router with no problem. Since this was not working in my new CentOS 6 partition, and remembering that there was a driver problem with the old Fedora partition it replaced, I followed instructions founs at:

Several weeks ago (July 1st), you may remember me asking about using a Linksys WET11 (ethernet to wireless bridge) with bridge-utils. Mark Mathews was kind enough to respond and described a situation he called "b/mcast echo". From his reply: " Because of the games that have to be played to build WLAN station bridge devices, some have a problem with what I call 'b/mcast

Hi! We have an installation with WLAN SIP phones only. Sometimes we have connection drops. What is the best way to debug if we have problems with the WLAN or the SIP devices or the uplink to the IAX Provider. TIA, Mike

How to search after wlans using command prompt I have no gui

Greetings, This is my fist time posting to a mailing list. For the past few days I have been trying to mimic my former windows workstation with a centos 6.3 workstation at work. I have gotten really far but am now facing an issue I cant seem to solve on my own. My former workstation had vmware for running my virtual machines. Most of the time I would run just two virtual machines, but sometimes

Hi folks! First post here, so please don't bother if it's not the right place to post those kind of questions. I'm currently running a 4.7-release (upgrade to 4.8 planned but not yet started) on my production box. As I would like to setup a small WLAN (major use for my notebook, other clients are possible) I need to know which cards are really supported. The handbook is IMHO not

Hello I've got this Mini-PC https://www.zotac.com/product/mini_pcs/zbox-ci323-nano everything is fine -> latest 6.8 kernel works; both Ethernet-Interfaces work and also the WLAN-Interface works; the two Ethernet-Interfaces are eth0 and eth1 the WLAN-Interface is wlan0 eth1 is connected on ISP side eth0 is connected on my LAN side to a switch; and wlan0 shall also be on my LAN side f?r

Hello, can CentOS 6.8 be run on a mini-PC like this? https://www.zotac.com/product/mini_pcs/zbox-ci323-nano would like to configure this as a Firewall, and this should be instead of my router (integratet firewall, NAT) and wlan-ap Thanks, Walter