search for: wd1200jb

vince@rti.com (Vince Chen) write: >We upgraded from samba 1.9.17 to 1.9.18 (now running p7) in hopes of >solving file-corruption problems when large files are copied to >NT from our IRIX 6.2 samba server. > >Has anyone see any file corruption? This won't solve your problem, but I just ran some tests copying a large file from NT to FreeBSD2.2.6 and back, w/o any sign of

...isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> umass0: Kingston DataTraveler II, rev 2.00/1.00, addr 2 Timecounters tick every 1.000 msec ad4: 114473MB <WDC WD1200JB-00FUA0 15.05R15> at ata2-master UDMA100 ad6: 114473MB <WDC WD1200JB-00CRA1 17.07W17> at ata3-master UDMA100 ad8: 194481MB <Maxtor 6Y200P0 YAR41BW0> at ata4-master UDMA100 ad9: 194481MB <Maxtor 6Y200P0 YAR41BW0> at ata4-slave UDMA100 ad10: 194481MB <Maxtor 6Y200P0 YAR41BW0&gt...

...ntly has as its "hard drive" an ATA-to-SCSI external RAID subsystem. The file server is a dual Pentium-III Tualatin 1.4GHz (512K cache) server, built on a Serverworks HESL-T chipset, with 2GB ECC Registered SDRAM. The RAID unit is a Promise UltraTrak100-TX8, with 8 Western Digital WD1200JB 120GB ATA100 7200rpm hard drives installed. 7 of the 8 drives are joined to a RAID5 array, the 8th is an unassigned hot spare. The UltraTrak's SCSI interface is an Ultra2-LVD (80MB/sec) interface, connected via its external 68-pin MicroD cable, to a custom Granite Digital internal-to-exte...

...1961 contains a hole at offset 4096 kernel: EXT3-fs error (device ide0(3,3)) in start_transaction: Journal has aborted last message repeated 1535 times last message repeated 1134 times [etc] The sole drive in both of these machines is a rather run-of-the-mill model: # grep hda: dmesg hda: WDC WD1200JB-00EVA0, ATA DISK drive hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=232581/255/63 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 > However, I notice some peculiarities with the on-board IDE interface: [from dmesg] Uniform Multi-Platform E-IDE driver Revision: 6.31...

Rarely, a geli partition I have freezes a process in bufwait state. It occurs after an ATA timeout message: Aug 5 03:47:13 thor kernel: ad10: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=219028637 The geli partition resides on an Intel MatrixRAID RAID1 mirror using the ICH9R chipset (Asus P5K-E/WIFI). Killing (even -9) the process does not work. Rebooting is the only solution, yet the

...csi0 : sata_promise ata2: SATA link down (SStatus 0) scsi1 : sata_promise ata3: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3468 86:3c01 87:4003 88:003f ata3: dev 1 ATA-6, max UDMA/100, 234441648 sectors: LBA48 ata3: dev 1 configured for UDMA/100 scsi2 : sata_promise Vendor: ATA Model: WDC WD1200JB-00D Rev: 75.1 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB...