Displaying 20 results from an estimated 84 matches for "wcb4xxp".
2008 Nov 12
4
test OpenVox B400P and junghans card for dahdi BRI wcb4xxp
hello:
thanks for Tzafrir Cohen for dahdi testing.
I installed dahdi-2.1-r3c svn code and asterisk1-6
for testing OpenVox B400P and junghans card. i fund that there is bug (i think) to dectect NT or TE mode. actually on the board,
i set it as TE mode, but after start wcb4xxp, but
it show the port is NT mode. to detect the TE mode, I modefy the code in base.c
============================================
?static void hfc_init_all_st(struct b4xxp *b4)
?? 1386 {
?? 1387???????? int i, gpio, nt;
?? 1388???????? struct b4xxp_span *s;
?? 1389
?? 1390???????? gpio = b4xxp_ge...
2010 Apr 28
2
BN8S0, dahdi, wcb4xxp
...[1397:16b8] (rev 01)
Subsystem: Cologne Chip Designs GmbH Device [1397:b562]
Flags: medium devsel, IRQ 21
I/O ports at 9480 [size=8]
Memory at fb9bb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Kernel modules: wcb4xxp, hfcmulti
bishop dahdi # modprobe wcb4xxp
bishop dahdi # lspci -v -nn -s 01:00.0
01:00.0 ISDN controller [0204]: Cologne Chip Designs GmbH ISDN network
Controller [HFC-8S] [1397:16b8] (rev 01)
Subsystem: Cologne Chip Designs GmbH Device [1397:b562]
Flags: medium devsel, IRQ 21...
2010 May 08
1
Conflict between jumper settings and dmesg with OctoBRI
Hello,
In my system, dmesg outputs :
[ 13.039788] wcb4xxp 0000:01:0a.0: probe called for b4xx...
[ 13.039788] ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 21 (level, low) ->
IRQ 21
[ 13.039788] wcb4xxp 0000:01:0a.0: Identified HFC-8S Junghanns.NET octoBRI
PCI (controller rev 1) at 0001dfe0, IRQ 21
[ 13.041202] wcb4xxp 0000:01:0a.0: NOTE: hardwar...
2010 May 09
1
B410P and Patton smartnode : any success ?
...gital_Subscriber_System_No._1, I
would say DSS1 and EuroISDN are the same (but that doesn't mean both
implementations are compliant to each other).
The mostly troubling thing is :
CLI> pri show spans
CLI>
Though with dmesg :
[ 3923.671739] dahdi: Version: SVN-trunk-r7640M
[ 3923.683743] wcb4xxp 0000:01:0a.0: probe called for b4xx...
[ 3923.683743] ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 21 (level, low) ->
IRQ 21
[ 3923.683743] wcb4xxp 0000:01:0a.0: Identified Wildcard B410P (controller
rev 1) at 0001dff0, IRQ 21
[ 3923.683743] wcb4xxp 0000:01:0a.0: VPM 0/1 init: chip ver 33
[ 392...
2008 Dec 03
0
What IRQ field from "dahdi show status" means ?
...XP (PCI) Card 0 Span 3 RED 0 0 0 CAS
Unk YEL 0 db (CSU)/0-133 feet (DSX-1)
B4XXP (PCI) Card 0 Span 4 RED 0 0 0 CAS
Unk YEL 0 db (CSU)/0-133 feet (DSX-1)
and also:
Dec 3 09:04:06 claire-ophbq3n0 kernel: [ 1720.240380] wcb4xxp 0000:08:00.0:
probe called for b4xx...
Dec 3 09:04:06 claire-ophbq3n0 kernel: [ 1720.240380] wcb4xxp 0000:08:00.0:
Identified Wildcard B410P (controller rev 1) at 0001ec00, IRQ 16
Dec 3 09:04:06 claire-ophbq3n0 kernel: [ 1720.240380] wcb4xxp 0000:08:00.0:
VPM 0/1 init: chip ver 33
Dec 3 09:04:06...
2010 May 27
2
BRI card(B800P) doesn's work with DAHDI(wcb4xxp) in NT mode
Dear Supports,
I was attempting to install BRI Card(OpenVox B800P) with wcb4xxp in NT mode .But I can not make it worked!
Could you please give me some hints? Thanks in advance!
Here are my environments:
------------------------------
CentOS-5.3
Kernel-2.6.18-164.el5
asterisk-1.6.1.6
dahdi-linux-complete-2.3.0+2.3.0
libpri-1.4.10.2
OpenVox-B800P(the first po...
2011 May 11
0
kernel: dahdi: Master changed to B4/0/x
Hi,
I did replace an old asterisk box by a new shiny one (2 BRI ports used
on a quad port card - BeroNet PCI Express)
I noticed a message in the logs that puzzles me:
May 11 19:10:02 kernel: dahdi: Master changed to B4/0/1
May 11 19:10:08 kernel: wcb4xxp 0000:05:04.0: PCI INT A disabled
May 11 19:10:08 kernel: wcb4xxp 0000:05:04.0: Driver unloaded.
May 11 19:10:08 kernel: dahdi: Telephony Interface Unloaded
May 11 19:10:09 kernel: dahdi: Telephony Interface Registered on major 196
May 11 19:10:09 kernel: dahdi: Version: 2.3.0.1
May 11 19:10:09...
2010 Jun 16
0
Asterisk +Dahdi does not work with BRI NT
...cpe
channel => 7-8
context = default
group = 63
; Span 4: B4/0/4 "B4XXP (PCI) Card 0 Span 4"
group=0,14
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe
channel => 10-11
context = default
group = 63
**************************dmesg*****************************************
wcb4xxp 0000:01:03.0: Port 1: NT mode
wcb4xxp 0000:01:03.0: Port 2: NT mode
wcb4xxp 0000:01:03.0: Port 3: TE mode
wcb4xxp 0000:01:03.0: Port 4: TE mode
wcb4xxp 0000:01:03.0: Did not do the highestorder stuff
wcb4xxp 0000:01:03.0: Configuring span 1
wcb4xxp 0000:01:03.0: new card sync source: port 3
wcb4xxp...
2008 Nov 16
2
dahdi compile error on svn
I did an svn check out of dahdi.
I am running centos 4.7
on the make all I get an error.
/usr/src/dahdi-complete/linux/drivers/dahdi/wcb4xxp/Makefile: No such
file or directory
make[4]: *** No rule to make target
`/usr/src/dahdi-complete/linux/drivers/dahdi/wcb4xxp/Makefile'. Stop.
make[3]: *** [/usr/src/dahdi-complete/linux/drivers/dahdi/wcb4xxp] Error 2
make[2]: *** [_module_/usr/src/dahdi-complete/linux/drivers/dahdi] Error 2...
2012 Jun 21
2
Asterisk 10/1.6.1 and Dahdi/Libpri compatilities in BRI /PtmP
...form, with Asterisk
1.6.1.18, Libpri 1.4.10.2, Dahdi revision 8853 (must be between 2.3
and 2.5, I think).
The second one is a 2.6.32 (Debian Squeeze) platform, with Asterisk
10.5.1, Libpri 1.4.12, Dahdi 2.6.1.
Both are connected to telco BRI lines in TE/PtmP mode through a
Junghanns QuadBRI board (wcb4xxp driver).
Both handle incoming and outgoing calls correctly, as far as I can tell.
But on the second one, though working fine, Dahdi keeps showing alarm
messages such as:
[71765.784120] wcb4xxp 0000:01:0e.0: new card sync source: port 1
[71767.484151] wcb4xxp 0000:01:0e.0: new card sync source: por...
2010 Jul 08
1
Junghanns QuadBRi not really recognized in Dahdi
...01)
Subsystem: 1397:b520
Flags: medium devsel, IRQ 16
I/O ports at e800 [size=8]
Memory at dfebf000 (32-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: [40] Power Management version 2
Kernel driver in use: hfc4s8s_l1
Kernel modules: wcb4xxp, hfc4s8s_l1
# lsmod | grep dah
dahdi 187464 3 wcb4xxp
crc_ccitt 2080 2 dahdi,hisax
# lsmod | grep hfc
hfc4s8s_l1 11716 0
hisax 397700 1 hfc4s8s_l1
# lsmod | grep wcb
wcb4xxp 73252 0
dahdi 187464 3 wcb4...
2010 Jun 17
4
Asterisk + Dahdi does not work with BRI NT mode
...pe
channel => 7-8
context = default
group = 63
; Span 4: B4/0/4 "B4XXP (PCI) Card 0 Span 4"
group=0,14
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe
channel => 10-11
context = default
group = 63
**************************dmesg*****************************************
wcb4xxp 0000:01:03.0: Port 1: NT mode
wcb4xxp 0000:01:03.0: Port 2: NT mode
wcb4xxp 0000:01:03.0: Port 3: TE mode
wcb4xxp 0000:01:03.0: Port 4: TE mode
wcb4xxp 0000:01:03.0: Did not do the highestorder stuff
wcb4xxp 0000:01:03.0: Configuring span 1
wcb4xxp 0000:01:03.0: new card sync source: port 3
wcb4xxp...
2014 Aug 21
0
[DAHDI] qozap instead of wcb4xxp
Hello,
?
I have a Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] card which seems to work on 1 machine but not on another. It SHOULD load this driver:
?
>dahdi_hardware -v
pci:0000:00:00.0 wcb4xxp+ 1397:08b4 Junghanns QuadBRI ISDN card
Instead of:
>dahdi_hardware -v
pci:0000:00:00.0 qozap- 1397:08b4 Generic Cologne ISDN card
There is no qozap modul in lib/modules but I tried to blacklist it anyway. The consequences that the card is not working in the second machine with t...
2015 Oct 29
0
DAHDI-Linux and DAHDI-Tools 2.11.0-rc1 Now Available
...ion cycle.
* Adds and improves support for Digium's b433, b434, b233, and b234
* Fixes compile issues with 4.0+ kernels
Shortlog of dahdi-linux changes since v2.10.1:
John Sloan (1):
wcxb: Fix "I/O error reported by firmware" followed by underruns
Russ Meyerriecks (9):
wcb4xxp: Add support for zarlink echocan
wctc4xxp: Fix continuous "errored receive packets" with 2+ transcoders
readme: Updated supported products section
octasic: Added slab.h include to fix ARM compile error
wcb4xxp: Remove "card sync source" logic
wcb4xx...
2015 Oct 29
0
DAHDI-Linux and DAHDI-Tools 2.11.0-rc1 Now Available
...ion cycle.
* Adds and improves support for Digium's b433, b434, b233, and b234
* Fixes compile issues with 4.0+ kernels
Shortlog of dahdi-linux changes since v2.10.1:
John Sloan (1):
wcxb: Fix "I/O error reported by firmware" followed by underruns
Russ Meyerriecks (9):
wcb4xxp: Add support for zarlink echocan
wctc4xxp: Fix continuous "errored receive packets" with 2+ transcoders
readme: Updated supported products section
octasic: Added slab.h include to fix ARM compile error
wcb4xxp: Remove "card sync source" logic
wcb4xx...
2010 Dec 16
0
Junghanns OctoBRI - Invalid sync priority
Hi,
Looking at dmesg, I can see :
[ 45.213205] wcb4xxp 0000:01:07.0: Span 5 has invalid sync priority (5),
removing from sync source list
[ 45.213205] wcb4xxp 0000:01:07.0: Span 6 has invalid sync priority (6),
removing from sync source list
[ 45.213205] wcb4xxp 0000:01:07.0: Span 7 has invalid sync priority (7),
removing from sync source list
[...
2010 Dec 16
1
PTMP BRI Unable to receive TEI from network in state 2(Assign awaiting TEI) - Asterisk 1.6.2, Latest DAHDI, LibPRI
...imary D-channel of span 1
[Dec 16 19:02:36] NOTICE[12786]: chan_dahdi.c:12931 pri_dchannel: PRI
got event: HDLC Abort (6) on Primary D-channel of span 2
======================================================================
Here's dmesg:
[ 2254.282352] dahdi: Version: 2.3.0.1
[ 2254.285768] wcb4xxp 0000:01:06.0: probe called for b4xx...
[ 2254.285768] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNKA] -> GSI
18 (level, low) -> IRQ 18
[ 2254.285768] wcb4xxp 0000:01:06.0: Identified Wildcard B410P
(controller rev 1) at 000000000001ec00, IRQ 18
[ 2254.285768] wcb4xxp 0000:01:06.0: VPM...
2015 Dec 22
0
DAHDI-Linux and DAHDI-Tools 2.11.0 Now Available
...34, b233, and b234
* Fixes compile issues with 4.0+ kernels
Shortlog of dahdi-linux changes since v2.10.1:
John Sloan (1):
wcxb: Fix "I/O error reported by firmware" followed by underruns
Oron Peled (1):
xpp: improve handling of USB sluggishness
Russ Meyerriecks (9):
wcb4xxp: Add support for zarlink echocan
wctc4xxp: Fix continuous "errored receive packets" with 2+ transcoders
readme: Updated supported products section
octasic: Added slab.h include to fix ARM compile error
wcb4xxp: Remove "card sync source" logic
wcb4xx...
2015 Dec 22
0
DAHDI-Linux and DAHDI-Tools 2.11.0 Now Available
...34, b233, and b234
* Fixes compile issues with 4.0+ kernels
Shortlog of dahdi-linux changes since v2.10.1:
John Sloan (1):
wcxb: Fix "I/O error reported by firmware" followed by underruns
Oron Peled (1):
xpp: improve handling of USB sluggishness
Russ Meyerriecks (9):
wcb4xxp: Add support for zarlink echocan
wctc4xxp: Fix continuous "errored receive packets" with 2+ transcoders
readme: Updated supported products section
octasic: Added slab.h include to fix ARM compile error
wcb4xxp: Remove "card sync source" logic
wcb4xx...
2009 Mar 12
0
compile error: implicit declaration of function drv_dbg
hello,
I try to open the debug to compile dahdi with wcb4xxp,
=================base.c============================================
#ifdef DEBUG_LOWLEVEL_REGS
if (unlikely(DBG_REGS))
drv_dbg(b4->dev, "read 0x%02x from 0x%p\n", ret, b4->addr + reg);
#endif
if (unlikely(pedanticpci)) {
udelay(3);
}
=========================================...