Displaying 4 results from an estimated 4 matches for "wan3".
Did you mean:
wan
2009 Mar 04
1
MultiWAN & Vlans
...detect tcpflags,dhcp,routefilter,nosmurfs
net2 ppp2 detect tcpflags,dhcp,routefilter,nosmurfs
net3 ppp3 detect tcpflags,dhcp,routefilter,nosmurfs
#WAN
wan0 eth0 detect tcpflags,routefilter,nosmurfs
wan1 eth1 detect tcpflags,routefilter,nosmurfs
wan2 eth2 detect tcpflags,routefilter,nosmurfs
wan3 eth3 detect tcpflags,routefilter,nosmurfs
dmz eth8 detect
# LOCAL
loc eth9 detect tcpflags,nosmurfs,detectnets
# VLAN
v10 vlan10 detect tcpflags,nosmurfs,detectnets
v20 vlan20 detect tcpflags,nosmurfs,detectnets
v30 vlan30 detect tcpflags,nosmurfs,detectnets
v100 vlan100 detect tcpflags,n...
2004 Dec 02
11
another network to add
Hi Tom (and others)
encase you don''t know my network already ;) here''s a quick run down
eth0 lan 192.168.1.1/255.255.255.0
eth1 wan1 172.30.7.4/255.255.240.0
eth2 wan2 202.37.230.93/255.255.255.192
eth3 wan3 203.96.213.73/255.255.254.0
I''ve got routes and rules for all the above interfaces :)
I want to add another one, however I fear this might cause some issues
I have another IP address 203.96.212.68/255.255.254.0 which is in the
same subnet as eth3 203.96.213.73
is it going to cause probl...
2004 Dec 03
1
Re: Shorewall-users Digest, Vol 25, Issue 9
...t/plain; charset=ISO-8859-1; format=flowed
>
> Hi Tom (and others)
> encase you don''t know my network already ;) here''s a quick run down
> eth0 lan 192.168.1.1/255.255.255.0
> eth1 wan1 172.30.7.4/255.255.240.0
> eth2 wan2 202.37.230.93/255.255.255.192
> eth3 wan3 203.96.213.73/255.255.254.0
>
> I''ve got routes and rules for all the above interfaces :)
>
> Paul.
>
hey paul is your shorewall actually working with split access?? can
you send me your routing config because i couldn''t make it work.
thanks!
Alberto Sierra
2004 Dec 10
0
Multiple ISPs
...FW:eth2
--------------------------------------------
FW:eth3
|
SWITCH:LAN:192.168.1.0/24
(eventually may add FW:eth4 as DMZ but not yet)
Each ISP provides 1 static public IP so let
eth0:WAN1
eth1:WAN2
eth2:WAN3
eth3:192.168.1.254
I would like to force traffic as so:
* POP3, SMTP, FTP: ISP1 only
* HTTP, HTTPS: load-balanced ISP1, ISP2, ISP3 EXCEPT
for 192.168.1.23 and 192.168.1.36 which should ALWAYS
use ISP2 exclusively
* IPSEC, PPTP: load-balanced ISP2, ISP3
Note that I would prefer keeping all LAN hos...