search for: vogele

Full_Name: Thomas Vogels Version: 0.64.1 OS: AIX 4.2 Submission from: (NULL) (198.133.22.70) R_problem_buf is defined, not just declared, in S.h: #define R_PROBLEM_BUFSIZE 4096 char R_problem_buf[R_PROBLEM_BUFSIZE]; This is bad since every time S.h is included this buffer is defined. The linker will eventually complain about multiple definitions of this symbol. Solution: declare

On Thu, 8 Aug 2019 at 10:08, Sven Vogel <S.Vogel@ewerk.com> wrote: > The question for me is why they use the smallest? > Because otherwise some frames won't get through because the interface can't receive them, and the job of network equipment is to enable and maintain communication :-). > > Cheers > > Sven > - Peter [...] > > Am 31.07.2019 um 15:50

Hello, maybe there is someone they can help and answer a question why i get these network screen on my ctdb clusters. I have two ctdb clusters. One physical and one in a vmware enviroment. So when i transfer any files (copy) in a samba share so i get such network curves with performance breaks. I dont see that the transfer will stop but why is that so? can i change anything or does anybody know

Hi, i need some help. We have two Networks. A CTDB Cluster and one domain controller in the same network. All other domain controller are outside this network. They are both connected with a firewall / router. We activated netbios over tcp on the other domain controllers outside but it seems that when we remove the single internal domain controller ctdb will not start with the following error.

Sorry you feel Strongly about the book but, I?m not trying to rip anyone off but as it said on the back of the book and under the author I?m new, to writing books I am trying to help the community out, But I guess this doesn?t really matter to you, But if you know so much about asterisk and the way a book should be laid out why don?t you write one? BTW I am open to ideas on improving the book

Il 17/07/20 10:54, Karl Vogel ha scritto: > It depends on the size of the variables in the structure used by the > stat() call. In ext4, the "links" variable is an unsigned 16-bit integer, > so you have your limit of 64k or so. I've worked with systems where > the limit was a signed 16-bit integer, so it maxed out at 32k. > > XFS may be a full 32-bit integer, so

G'Day List, Can someone help me out a bit please. I just installed Fedora Core 3 on a Dell Power Edge 400 SC and am trying to install * I am following http://www.voip-info.org/wiki-Asterisk+Step-by-step+Installation After running: cd /usr/src/asterisk make clean make make install make samples The instructions says: Configuring Asterisk - Login to your server as user

Dear List Members As a relatively new R user I am extremely glad for there being a nice tool such as ggplot for producing easily nice graphs in R. Now I want to produce graphs with two y-axis. I know that this has been asked a hundred times with respect to standard plots in R. (The answer, to my knowledge, has always been "No" or "No, see the help archive".) But: Is there

I have created a function to do something: i <- factor(sample(c("A", "B", "C", NA), 793, rep=T, prob=c(8, 7, 5, 1))) k <- factor(sample(c("X", "Y", "Z", NA), 793, rep=T, prob=c(12, 7, 9, 1))) mytable <- function(x){ xtb <- x btx <- x # do more with x, not relevant here cat("The table has been created,

Quick summary: - I got command line editing to work (thanks to all who responded to me), - but now my ``m'' key won't work in R (??!!??!!??), - and I can't find how to get command-line editing to use vi syntax. More detail: This posting consists of (1) a summary and thanks, and (2) some new questions. Summary and thanks: =================== I was having trouble

Hey there, I hope anyone can bring some light in the following problem. <interface type='bridge'> <source bridge='cloudbr0'/> <mtu size='2000'/> <mac address='02:00:74:76:00:01'/> <model type='virtio'/> <virtualport type='openvswitch'> </virtualport> <vlan trunk='no'> <tag

Hi! The encoding, decoding and recoding cost cpu time, that's sure. But does this time differs much depending on the used codec? Is - for example - a G729 faster than a GSM codec? Bye! Michael

which printer brand/model and which driver? > Op 14 aug. 2016 om 13:25 heeft Vogel, Sven via samba <samba at lists.samba.org> het volgende geschreven: > > Hi, > > it seems there is a problem/bug in windows 10 that point and print restriction dont work and gpo are ignored. I don't know. When I use windows 7 there o problems. technet article they speak about packaged

A Likert scale may have produced counts of answers per category. According to theory I may expect equality over the categories. A statistical test shall reveal the actual equality in my sample. When applying a chi square test with increasing number of repetitions (simulate.p.value) over a fixed sample, the p-value decreases dramatically (looks as if converge to zero). (1) Why? (2) (If

Full_Name: Paul Gutwin Version: R-1.0.0 OS: AIX 4.2.1 Submission from: (NULL) (198.133.22.67) R-1.0.0 fails to compile. I'm using the config.cache file from a successful compliation of R-0.65.0 (prob #290, fixed thanks to Thomas Vogels @ CMU). Compiling R-1.0.0 fails with the following error messages: make Target "R" is up to date. gcc -I. -I../include -I../../src/include

Hi Michal, Thanks for your answer. I don’t understand why an interface created without mtu gets only 1500 visible in the virtual machine but if I create an interface with mtu higher than 1500 e.g. 2000 the bridge will change too. Before the bridge was e.g. by 9000. I ask because you wrote if I don’t set an mtu of the interface I will get the mtu of the bridge. But it seems so. Can you clarify

Hello everyone, I am trying to tweak some of the sysctl tunables for the ix (ixgbe) driver in FreeBSD 9.2 since I am experiencing less than ideal performance and it seems like I can't find any: # sysctl -a | grep -i ixgbe device ixgbe I am running 9.2-RC4. Any input appreciated. Thanks, -- Rumen Telbizov Unix Systems Administrator <http://telbizov.com>

### example:start v <- sample(rnorm(200), 100, replace=T) k <- rep.int(c("locA", "locB", "locC", "locD"), 25) tapply(v, k, summary) ### example:end ... (hopefully) produces 4 summaries of v according to k group membership. How can I transform the output into a nice table with the croups as columns and the interesting statistics as lines? Thx,

Hi, how can i get work Samba 4 Sernet 4.1.7 correctly with NIS. Ist provisioned with rfc2307. When i query a User withi get the following. getent passwd testswi SWI\testswi:*:10000:100:testswi:/home/SWI/testswi:/bin/false I want to change /bin/false to a other value /bin/bash I tried many things to change the value. 1. ldbedit -e vim -H /var/lib/samba/private/sam.ldb samaccountname=testswi

In general if no MTU is set on interface creation the default value is 1500. On OVS the bridge MTU is automatically set to the smallest port MTU. So you just have to set the MTU of each port of the bridge. Take a look at: https://bugzilla.redhat.com/show_bug.cgi?id=1160897 It is a bit of a pain to read but seems to confirm the statement about the OVS MTU value being set by the MTU of the