search for: vnic2

...allation and additionally a zone with exclusive IP. My network configuration looks like this: [6]elsinore:~>dladm show-link LINK CLASS MTU STATE OVER bge0 phys 1500 up -- etherstub0 etherstub 9000 unknown -- vnic1 vnic 9000 up etherstub0 vnic2 vnic 9000 up etherstub0 [9]elsinore:~>ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 bge0: flags=1104843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,ROUTER,IPv4> mtu 1500 index 2 inet 10.1....

...d and the /etc/hosts file is not modified either.<br> <br>     I noticed that the network auto-magic service is not available on my system.<br>     could it be the reason?<br> <br>     Here is some detail about what I am doing.<br> <br>     I created a VNIC vnic2 and a non-global zone.<br> <br>     When creating the non-global zone I set the "ip-type" to "exclusive"<br>     and used "add net" and "setphysical=vnic2" to specify that the<br>     zone should be using vnic2 to access the network.&l...

How do I create a vnic that represents the factory assigned MAC address of my physical nic? The bge device in my system (x2100) appears to support 4 MAC addresses. The driver reserves the first as the ''primary/default'' address and allows manipulation of the other three via the MAC_CAPAB_MULTIADDRESS interface. I''d like to use vnics on this system, as I have Xen guest

...ave created an etherstub2-zone, witch uses the vnic 6 to connect with the global zone. At this point, no problem at all But know I want to add a vnic of etherstub 1 to the etherstub2-zone to make the connection between the global zone (192.160.50.50) and a new zone that will have, for example, vnic2 in the 192.168.1.0 lan (etherstub 1) When I try to plumb for exmaple vnic 4 to the etherstub2-zone, I get this error: "ifconfig: cannot open link "vnic4":DLPI link does not exist" What I''m doing wrong? I think it''s a problem of zone configuration, more...

...ost?? Thanks in advance. IF-MIB::ifDescr.1 = STRING: lo0 IF-MIB::ifDescr.2 = STRING: ibd0 IF-MIB::ifDescr.3 = STRING: ibd1 IF-MIB::ifDescr.4 = STRING: nge0 IF-MIB::ifDescr.5 = STRING: nge1 IF-MIB::ifDescr.6 = STRING: vboxnet0 IF-MIB::ifDescr.7 = STRING: m121_vnic1 IF-MIB::ifDescr.8 = STRING: m121_vnic2 IF-MIB::ifDescr.9 = STRING: m115_vnic1 IF-MIB::ifDescr.10 = STRING: m115_vnic2 IF-MIB::ifDescr.11 = STRING: m119_vnic1 IF-MIB::ifDescr.12 = STRING: m119_vnic2 IF-MIB::ifInOctets.1 = Counter32: 0 IF-MIB::ifInOctets.2 = Counter32: 3436035 IF-MIB::ifInOctets.3 = Counter32: 45735 IF-MIB::ifInOctets.4...

On OpenSolaris 2009.06 I created a flow, half a dozen VNICs, and I set some properties, and everything was working, then I rebooted my system and everything disappeared from show-vnic, show-flow, and show-prop. When I tried to re-create the objects, dladm said they already existed. While I could not see the objects, I could delete them. Example: # dladm show-vnic # dladm create-vnic -l bge0