search for: vmbr0

...ork-scripts cat ifcfg-eth0 DEVICE="eth0" BOOTPROTO=none NM_CONTROLLED="no" ONBOOT="yes" TYPE="Ethernet" HWADDR=00:25:22:0D:C2:2A DOMAIN=domain.eu IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="System eth0" UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03 BRIDGE=vmbr0 cat ifcfg-eth0.20 DEVICE=eth0.20 BOOTPROTO=none ONBOOT=yes VLAN=yes BRIDGE=vmbr20 cat ifcfg-vmbr20 DEVICE=vmbr20 BOOTPROTO=none DHCPCLASS= IPADDR=10.20.0.108 NETMASK=255.255.0.0 ONBOOT=yes TYPE=Bridge cat ifcfg-vmbr0 DEVICE=vmbr0 BOOTPROTO=none DHCPCLASS= IPADDR=195.218.152.219 NETMASK=255.255.2...

...one look over my setup and give me some input into the proper way to set this up so that I can do all the normal Shorewall things properly like blocking like normal, port forwards, etc. ? I think my current setup mostly works, but I''m seeing messages like: Shorewall:FORWARD:REJECT:IN=vmbr0 OUT=vmbr0 PHYSIN=vmtab101i0 PHYSOUT=vmtab102i0 SRC=10.10.42.3 DST=10.10.42.2 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=61722 DF PROTO=TCP SPT=47118 DPT=3260 WINDOW=5840 RES=0x00 SYN URGP=0 (some of these are from external machines to a virtual machine and mention eth1 as the physical - this one...

Hi everybody. I''m trying to configure shorewall folowing this manual: http://www.montanalinux.org/proxmox-ve-with-shorewall.html But with shorewall check it tells me thah: Checking /etc/shorewall/interfaces... ERROR: Unknown zone (dmz) : /etc/shorewall/interfaces (line 16) How can I define it in the zone file? thanks for the help. best regards, Santiago.

Hi, I have two public ip''s and i want to dedicate one ip for incoming and outgoing to one server. I followed http://www.shorewall.net/shorewall_setup_guide.htm and used the example of the daughter system. I have a machine connected on vmbr0 with address 10.10.10.1 listening on port 80 www. Still I can''t connect to this system. I''m forgetting something? Sincerely, Selvam Matthys my interface file: auto eth0 iface eth0 inet static address 94.23.244.210 netmask 255.255.255.0 gateway 94.23.244.254 auto eth0:0 iface...

...8/sec:30 -------------------------------------- I see some drops in the logs, which results in some timeouts. Although most of the traffic from 94.23.242.44 is well redirected to 10.0.0.7. -------------------------------------- Jan 20 19:24:29 ks309069 kernel: Shorewall:net2dmz:DROP:IN=eth0 OUT=vmbr0 SRC=74.127.214.2 DST=10.0.0.7 LEN=52 TOS=0x00 PREC=0x00 TTL=244 ID=7235 DF PROTO=TCP SPT=49967 DPT=80 WINDOW=32768 RES=0x00 SYN URGP=0 Jan 20 19:24:40 ks309069 kernel: Shorewall:net2dmz:DROP:IN=eth0 OUT=vmbr0 SRC=90.26.201.69 DST=10.0.0.7 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=18626 DF PROTO=TCP...

...st' LANL: 192.168.84.0/24: . 192.168.84.253 Proxmox file server (same machine as 192.168.42.70). . 192.168.84.101 Windows 7 client trying to access files from above server. (same machine as 192.168.42.111) I should mention that 3 Bridges are also defined manually on the Proxmox server: . vmbr0: This unifies the Gigabit Ethernet ports (normal network) . vmbr1: This unifies the 10 Gigabit Ethernet ports (fast network) . vmbr2: This is a private host-only subnet for the VMs on the box - ignore Below, here are my logs and configuration files. It's all very long, so I'll close her...

hello before asking my question I come My name is Santiago and I''m from Spain but I''m in Colombia I followed this guide: https://www.doas.montanalinux.org/proxmox-ve-with-shorewall.html but when I run shorewall check, this error occurs: Checking... Initializing... Determining Zones... IPv4 Zones: net loc Firewall Zone: fw Validating interfaces file... ERROR: Invalid

...255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1831 errors:0 dropped:0 overruns:0 frame:0 TX packets:1831 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3576260 (3.4 MiB) TX bytes:3576260 (3.4 MiB) [root at node78 ~]# ifconfig vmbr0 vmbr0: error fetching interface information: Device not found Best Regards, Frank

...ip link set dev $INTERFACE down brctl delif br0 $INTERFACE Server 2 /etc/network/interfaces ----------------------------------------------------- root at pve:~# cat /etc/network/interfaces auto lo iface lo inet loopback iface enp2s0 inet manual # Public network IP (enp2s0 interface bridge) auto vmbr0 iface vmbr0 inet static address 88.198.xx.xxx netmask 255.255.255.224 gateway 88.198.xx.xxx bridge_ports enp2s0 bridge_stp off bridge_fd 0 # Bridge for VM private network # (on vm stratup will add VM tap device here and on tinc-up will add tinc tap device here) auto vmbr2 iface vmbr2 inet ma...

...sb0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <interface type='bridge'> <mac address='02:00:c0:a8:31:97'/> <source bridge='vmbr0'/> <virtualport type='openvswitch'> <parameters interfaceid='6e492227-cd8b-f472-9f3d-1161ddf9ecfc'/> </virtualport> <target dev='vnet0'/> <alias name='net0'/> <address type='pci...