search for: vlanid

...n it. I have provided my network section below which works fine as long as i don't enable all the bridge content. When the installation starts off the creation of bond0 and all VLANs on bond0 go without issue. Jumping into TTY2 I can type 'ip a' and see all the bond0 device and bond0.VLANID devices no problem. When I enable bridge content with --bridgeslaves=bond0 or --bridgeslaves=bond0.VLANID anaconda barfs When I enable bridge content with --bridgeslaves=em1 or --bridgeslaves=em2 anaconda doesn't have an issue. Is this expected behaviour? I really don't want to have to...

...erLength 10 G729JitterBufferMax 200 LongHoldAlertPeriod 360 # options are ON and OFF DiffServMode OFF DefaultDiffServParam 192 RTPDiffServParam 160 # options are TRUNKMODE, CASCADEMODE, DISABLE VlanMode DISABLE VlanID 1 PcVlanID 2 TftpAddress 192.168.5.100 # save to phone and used next time if not offered from DHCP Q_Param 50 uniden00e01102f8ff.txt # UIP200 Mass Configuration System Mac-based File # Notes: Lines star...

...it with port mirroring in >the Cisco). > >I've performed some tests and the behaviour of VLAN in Linux seems to be as >follows: when a tagged packet arrives to the interface, the kernel checks if >there is some matching subinterface (for example, if the packet is tagged >with VLANID=200, a eth2.200 is looked for). In that case, the packet is >deliver (untagged) to that interface, otherwise the packet is discarted (so, >it is never arrives to the bridge). > >Is that right? (I've asked this question also in the VLAN support list) Is >there some way to change t...

...Cisco -I've checked it with port mirroring in the Cisco). I've performed some tests and the behaviour of VLAN in Linux seems to be as follows: when a tagged packet arrives to the interface, the kernel checks if there is some matching subinterface (for example, if the packet is tagged with VLANID=200, a eth2.200 is looked for). In that case, the packet is deliver (untagged) to that interface, otherwise the packet is discarted (so, it is never arrives to the bridge). Is that right? (I've asked this question also in the VLAN support list) Is there some way to change this behaviour (so un...

...es=eth0,eth1 --bondopts=... Kickstart gives an error to the bond0 line saying "The provided network interface bond0 does not exist". Why? Then I put a 'modprobe bonding' line to my %pre section. Now same error in the following line: network --onboot=yes --noipv6 --device=bond0 --vlanid=1 --bootproto=static --ip=192.168.1.1 --netmask=255.255.255.0 It is clear as I do not have bond0.1 but why should I have at setup time. I do not want to use at setup time only in my final installation. I am lost that point so I turned to the list. I do not really understand why kickstart use inte...

Hi, how can ip instances be used with vlans ? Is that possible ? I don''t know how to configure this, if I only have one interface (e.g. bge0), and want to assign e.g. bge1000 to a zone. Any cookbooks available ? Thanks Detlef

...ax 200 LongHoldAlertPeriod 360 RTPPortBase 25000 # options are ON and OFF DiffServMode OFF DefaultDiffServParam 192 RTPDiffServParam 160 # options are TRUNKMODE, CASCADEMODE, DISABLE VlanMode DISABLE VlanID 1 PcVlanID 2 #SNTP Settings # choices are YES and NO EnableSNTP NO # SNTP Server IP address SntpServerIP 199.240.130.12 # ntp1.kansas.net TimeZone -6 # -6 For Central Time Zone # choices are YES and NO EnableDST...

Hi, I have a problem similar to the previous poster (thread: Virtual network of DomU''s), but apparently not with similar solutions... Situation: - two physical links aggregated to "default0" - dladm create-vlan on default0 with several different vlans - xVM DomU running linux connected to the same vlans when trying to ping the DomU from Dom0, I can see with snoop (in Dom0)

I just added 802.1Q VLAN support to redhat initscripts. And after support was ready, I tried to restart shorewall. Well it blew into pieces. Seems like shorewall can''t handle device names like: eth0.3 very properly. That''s default naming of vlan devices. eth1 is master device and 3 is id of my test vlan. So when I added to interfaces line: home eth0.3 detect seems like

....xensource.com Subject: RE: [Xen-users] VLAN help Hi! I''v just recently set that kind of eviroment up. What Host OS are you running becouse i wrote 2 diffrent howtos for Red Hat and one for SuSe. But in theory you just have 1 interface for ex: eth0 then you do vconfig add eth0 VLANID when that is done you create a bridge something like this: brctl addbr brVLANID brctl addif brVLANID eth0.VLANDID when that is setup you should change "network-script=network-bridge" to "network-script=network-dummy" within your xend-config.sxp so Xend doesnt screw up y...

Hi, i''m having problems attaching disks from a fc-san to a solaris 10 guest. xen host ist a opensolaris box "SunOS node1 5.11 snv_127 i86pc i386 i86xpv". my xen guest is named pg4. this command works fine. virsh attach-disk pg4 /dev/dsk/c8t600A0B800029D69A000013CA4B00E1ABd0 hdb and before i was able to import this volume as a zpool on the xen host - so connection to this

....xensource.com Subject: RE: [Xen-users] VLAN help Hi! I''v just recently set that kind of eviroment up. What Host OS are you running becouse i wrote 2 diffrent howtos for Red Hat and one for SuSe. But in theory you just have 1 interface for ex: eth0 then you do vconfig add eth0 VLANID when that is done you create a bridge something like this: brctl addbr brVLANID brctl addif brVLANID eth0.VLANDID when that is setup you should change "network-script=network-bridge" to "network-script=network-dummy" within your xend-config.sxp so Xend doesnt screw up y...

--- In english --- Hello! I am to implement a new architecture of the network in my company but I do not know right where to start ... need help! Currently 90% of my servers are virtual machines under Xen. I have many valid IP networks and all Hypervisors are configured in bridge mode, to simplify. We have 3 VMWare ESX Hypervisor also in bridge mode. Some networks are exclusive to certain